Easy, Fast and Perfect Vanilla Hackintosh

[MIGUEL -]

Hello, what are the steps to install Monterrey on an Asus B450M-A motherboard with an Amd Ryzen 1500x 4-core processor and AMD Radeon RX 570 Series graphics?

Thank you.

PS: Do I have to touch something in the BIOS?

 

 

[Guest]

Processor Name - AMD Ryzen 5 4600G

Chipset - Renoir

I have a desktop but cannot find this EFI. Is this chipset supportable?

[MaLd0n]

amd mobile gpu don't have support

[workstation Pro]

On 12/28/2021 at 8:52 AM, MaLd0n said:

DSDT.aml.zip 47.32 kB · 99 downloads

Propriedades da Placa Mãe    
ID da Placa Mãe    <DMI>
Nome da Placa Mãe    Intel Corp. Emerald Lake
    
Propriedades do Bus principal    
Tipo de Bus    BCLK
Clock real    100 MHz
Clock efetivo    100 MHz
    
Propriedades da memória do Bus    
Tipo de Bus    DDR3 SDRAM
Largura de bus    64 bits
DRAM:Proporção FSB    24:3
Clock real    800 MHz (DDR)
Clock efetivo    1600 MHz
Banda    12800 Mb/s
    
Propriedades do chipset do Bus    
Tipo de Bus    Intel Direct Media Interface v2.0

North Bridge: Intel Sandy Bridge-MB IMC

South Bridge: Intel Cougar Point HM65

Tabela de propriedades da ACPI    
Assinatura da ACPI    APIC
Descrição da Tabela    Multiple APIC Description Table
Endereço de Memória    00000000-BAFEE000h
Tamanho da Tabela    152 bytes
OEM ID    DELL
OEM Table ID    QA09
OEM Revision    00000002h
Creator ID    PTL
Creator Revision    00000002h
Local APIC Address    FEE00000h

I have this motherboard, I installed Clover but in the installation says that the macos is not compatible with the mac.

I'm a beginner and i've looked for opencore etc... and I can't install.

 

[MaLd0n]

SandyBridge or IvyBridge

[Girottos]

On 12/11/2021 at 12:10 PM, MaLd0n said:

--Update first post--

Alderlake support

Fala @MaLd0n, iniciei o modelo 2023

H610i gaming jginyue (já to arrependido sim)

12600KF

1x Netac 7000 + 2x SSD Kingston

BMC94360 as always

RX550 LP (do outro build que tava sussa com FF67) , mas assim que chegar o riser 4.0 vai pra RX6600XT (já testei no Dell e foi de boa.

ia subir o BigSur pra mapear primeiro.

Veja se consegue me dar aquela sagrada luz novamente.

 

Att

Rafael Girotto

 

Maldon.zip

Just now, Girottos said:

Fala @MaLd0n, iniciei o modelo 2023

H610i gaming jginyue (já to arrependido sim)

12600KF

1x Netac 7000 + 2x SSD Kingston

BMC94360 as always

RX550 LP (do outro build que tava sussa com FF67) , mas assim que chegar o riser 4.0 vai pra RX6600XT (já testei no Dell e foi de boa.

ia subir o BigSur pra mapear primeiro.

Veja se consegue me dar aquela sagrada luz novamente.

 

Att

Rafael Girotto

 

Maldon.zip 128.12 kB · 0 downloads

nem consegui chegar no instalador ainda. testei umas 3 EFI prontas e tentei uma do zero, para no ACPI com uma informação de diferença no topology de 10 pra 16 (efi do GitHub que testei era i3-12100)

[MaLd0n]

21 hours ago, Girottos said:

Fala @MaLd0n

EFI.zip

[frenchface]

I finally got it installed, however, everything is very slow, I'm not really sure what to do next.

Archive.zip

[zerokool75]

Hello,

I need help with ventura install on my pc. I've tried everything with OC.

MSI B560M- PRO-VDH

CPU i5-10400

NVIDIA GTX 670 4GB DDR5 THAT WORK WITH OPCL.

Please any help is welcome.

 

 

Thanks in advance.

VENTURA USB INSTALL ERROR OLARILA 1.zip

[MaLd0n]

-Bios/UEFI in full default settings(Just change settings if need)
-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

[MaLd0n]

Easy, fast and perfect Vanilla Hackintosh with Clover and Opencore - Windows, Linux or macOS

 

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

 

Some Basic Information

-Use USB2 port for easy installation with no remap USB

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

 

Bios/UEFI Configuration

-Sata = AHCI mode

-Secure Boot = Disable if need

-CSM = Disable with AMD cards

 

*If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

*You can request one full ACPI solution HERE and Premium Users HERE

*After installation you need remove unnecessary files like unused Lan kexts

*If your GPU don't need agdpmod=pikera, remove this bootarg

*If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

*Users with IGPU need change SMBIOS (example: for Skylake Processor change smbios iMacPro1,1 to iMac17,1)

*Generate a good and valid serial for you

 

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux)
https://www.olarila.com/topic/6278-hackintosh-and-macintosh-olarila-vanilla-images-macos/

1b) How to create USB Installer (Mac)
https://www.olarila.com/topic/6185-guide-how-to-create-personal-vanilla-macos-image-or-usb-installer/

 

Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux)

2a) Download Link https://www.balena.io/etcher/

 

Step 3 - Downloading correct EFI folder for your hardware (Clover or OpenCore)

3a) https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

 

Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows)

4a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

 

Step 6 - Copying EFI folder to SSD EFI partition after Installation

6a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 7 - Starting a real fine tune with full ACPI solution

7a) Extracting full Dump with RunMe.app

https://www.olarila.com/topic/10301-hackintosh-olarila-runme-dumper-app/

7b) Posting full dump for one full ACPI solution

-Donators and Premium users have a personal room for that. Check link bellow.

https://www.olarila.com/forum/84-dsdt-patch-requests/

-Check link bellow about Premium and Donators users

https://www.olarila.com/topic/7717-important-premium-and-donators-users/

-DSDT patch requests (Post in this topic if you want FULL DSDT patched, please don't open a new topic, unless you are trying to learn how to do it yourself and need help.)

 

Step 8 - USB Port Mapping

8a) https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/

 

Step 9 - Dual Boot with OpenCore and Full ACPI Solution

9a) With Official OpenCore

https://www.olarila.com/topic/13019-hackintosh-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/

9b) With MOD Opencore

https://www.olarila.com/topic/24542-opencore_no_acpi-opencore-with-additional-featureschanges-implemented/

 

Step 10 - How to update OpenCore bootloader

10a) https://www.olarila.com/topic/14268-how-to-update-opencore-bootloader-on-hackintosh-easy-and-fast-way/

 

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

[Joseph Reed]

Hi! When booting up on my Predator Helios 300 I am getting MACH Reboot. How can I fix this? Thank you 

[Apple_Lover_1984]

How do I enter bootargs?

[zerokool75]

On 2/18/2023 at 6:35 AM, MaLd0n said:

-Bios/UEFI in full default settings(Just change settings if need)
-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

I was able to install but now some kext are not working on ventura. See my Config.plist and please let me know what I have wrong there.

config.7z

I was able to install but now some kext are not working on ventura. See my Config.plist and please let me know what I have wrong there.

 

 

MSI B560M- PRO-VDH

CPU i5-10400

NVIDIA GTX 670 4GB

Please any help is welcome

config.7z

[MaLd0n]

13 hours ago, zerokool75 said:

NVIDIA GTX 670 4GB

the best is change this card to one amd card with native support like rx560, rx580, etc

[zerokool75]

I understand that, Im working on that but the problem I'm facing is that for some reasons some kext are not loading or working in Ventura. Please check my config.plist file!!!!

[greens]

 

Freeze with the USB-2 key (try with 2 different ones) to install your Ventura version, any suggestion ? 
unable to install... 
Note: EFI opencore Haswell-E (Intel X99 chipset: LGA 2011-3) 

nothing happens after, the key stops making light...

[kultrun]

hi Maldon!

I have a question: I was installing Ventura from the last image that there is to download from Olarila. I can install everything fine, following all the steps, but then I have a problem with the opencore version

when i want to edit the config.plist i get an opencore validation error:

This version of ocvalidate is only compatible with OpenCore version 0.8.8!

I tried updating opencore as you explain here, but still I keep getting validation errors related to opencore versions.
And the problem is that I can't edit the config.plist to change the smbios and make the iGPU work (UHD 630)

 

I don't know how to continue... and I also wanted to configure opencore for dual booting with windows on another disk I really appreciate your help!

[MaLd0n]

53 minutes ago, kultrun said:

hi Maldon!

use opencore mod X64.NO.ACPI.zip

Follow steps here

https://www.olarila.com/topic/24542-opencore-no-acpi-how-to-use-this-fork/

 

[kultrun]

Thanks Maldon, I'll try

So... I follow the following steps:

1. I install ventura according to your guide

2. After installing, I copy the EFI folder (https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/)

3. I follow the instructions from here: How to use this OpenCore fork

 

4. after this I send you the full Dump with RunMe.app

then, i believe i just will need the graphics patch for UHD 630 intel to have full acceleration

 

It's okay like that?

[MaLd0n]

2 hours ago, kultrun said:

then, i believe i just will need the graphics patch for UHD 630 intel to have full acceleration

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

2 hours ago, kultrun said:

It's okay like that?

Yes

[kultrun]

57 minutes ago, MaLd0n said:

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

Yes

Thanks Maldon... 

I followed all the steps and apparently everything is ok... except the graphic acceleration

I send you the "send me..." file (for the full acpti solution) and the config.plist to find out where the error is with the configuration of the UHD 630 video

I would really appreciate your help!

Send me iMac-Pro.zip config.plist.zip

[MaLd0n]

1 hour ago, kultrun said:

Thanks Maldon

DSDT.aml.zip

VIDEO PATCH start with this

Quote

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
            </dict>

u need change smbios to iMac19,2

[kultrun]

2 hours ago, MaLd0n said:

DSDT.aml.zip 30.99 kB · 0 downloads

VIDEO PATCH start with this

u need change smbios to iMac19,2

 

thank you so much, Maldon!

I'm going to reinstall Ventura again... following these steps. Unfortunately, for now opencore boot doesn't recognize windows 11 input automatically (it's on another drive), but I haven't been able to get video to work with the correct graphics acceleration either.

I'll use the dsdt.aml in the new installation and continue investigating the video, which doesn't work for now... (in the previous installation, the previous patch you sent me worked for the Monterey version)

I don't know if that patch could work now in Ventura?

 

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>BAAAAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
            </dict>

[MaLd0n]

52 minutes ago, kultrun said:

thank you so much, Maldon!

U can try check github search with igpu for ur processor