Administrators MaLd0n Posted December 11, 2021 Author Administrators Share Posted December 11, 2021  Easy, fast and perfect Vanilla Hackintosh with Clover and Opencore - Windows, Linux or macOS - How to - Step by Step - Guide - Tutorial  Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE  Some Basic Information -Bios/UEFI in full default settings(Just change settings if need) -Use USB2 port for easy installation with no remap USB -If you have only IGPU use -igfxvesa bootarg for easy installation -Delete old EFI folder and paste new. Don't use merge files -Don't use Drag and Drop into EFI partition. Use Copy/Paste instead -Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen  Bios/UEFI Configuration -Sata = AHCI mode -Secure Boot = Disable if need -CSM = Disable with AMD cards  *If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab *You can request one full ACPI solution HERE and Premium Users HERE *After installation you need remove unnecessary files like unused Lan kexts *If your GPU don't need agdpmod=pikera, remove this bootarg *If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs *Users with IGPU need change SMBIOS (example: for Skylake Processor change smbios iMacPro1,1 to iMac17,1) *Generate a good and valid serial for you  Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer 1a) Olarila Images (Windows, Mac or Linux)https://www.olarila.com/topic/6278-hackintosh-and-macintosh-olarila-vanilla-images-macos/ 1b) How to create USB Installer (Mac)https://www.olarila.com/topic/6185-guide-how-to-create-personal-vanilla-macos-image-or-usb-installer/  Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux) 2a) Download Link https://www.balena.io/etcher/  Step 3 - Downloading correct EFI folder for your hardware (Clover or OpenCore) 3a) https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/  Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows) 4a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/  Step 5 - Formatting SSD on Installer 5a) On Disk Utility Change "View" options to "Show All Devices" 5b) Selecting and formatting SSD. Use GUID and APFS  Step 6 - Copying EFI folder to SSD EFI partition after Installation 6a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/  Step 7 - Starting a real fine tune with full ACPI solution 7a) Extracting full Dump with RunMe.app https://www.olarila.com/topic/10301-hackintosh-olarila-runme-dumper-app/ 7b) Posting full dump for one full ACPI solution -Donators and Premium users have a personal room for that. Check link bellow. https://www.olarila.com/forum/84-dsdt-patch-requests/ -Check link bellow about Premium and Donators users https://www.olarila.com/topic/7717-important-premium-and-donators-users/ -DSDT patch requests (Post in this topic if you want FULL DSDT patched, please don't open a new topic, unless you are trying to learn how to do it yourself and need help.)  Step 8 - USB Port Mapping 8a) https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/  Step 9 - Dual Boot with OpenCore and Full ACPI Solution 9a) With Official OpenCore https://www.olarila.com/topic/13019-hackintosh-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/ 9b) With MOD Opencore https://www.olarila.com/topic/24542-opencore_no_acpi-opencore-with-additional-featureschanges-implemented/  Step 10 - How to update OpenCore bootloader 10a) https://www.olarila.com/topic/14268-how-to-update-opencore-bootloader-on-hackintosh-easy-and-fast-way/  Credits: Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others! 1 Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Robson_muniz Posted December 17, 2021 Share Posted December 17, 2021 My hackintosh can read my "Flash drive" of course, I installed it from it. But it doen't recognize my external HD. How can I fix it? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted December 17, 2021 Author Administrators Share Posted December 17, 2021 33 minutes ago, Robson_muniz said: How can I fix it? Remap USB https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/ Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Tim Suchy Posted December 27, 2021 Share Posted December 27, 2021 Send me Timothys-MBP.routerlogin.net.zipThe Run Me results are in.Could I please get Patch list? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted December 28, 2021 Author Administrators Share Posted December 28, 2021 12 hours ago, Tim Suchy said: Send me Timothys-MBP.routerlogin.net.zipThe Run Me results are in.Could I please get Patch list? DSDT.aml.zip Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
rajanpandit2000 Posted January 9, 2022 Share Posted January 9, 2022 Hai, I am running BigSur. after update to 11.5.2 my system not showing further updates. I am still at 11.5.2... please help to resolve this.. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 10, 2022 Author Administrators Share Posted January 10, 2022 enable sip Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
GuitarFa12 Posted January 15, 2022 Share Posted January 15, 2022 Hi! I am trying to install BigSur on my computer which is a GB Z390 Designare with i9 9900K and GB RX580 graphics, but I do not even get to the installation following this process. I attach a picture of the moment when it stops. Can you help me? Thank you very much Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 16, 2022 Author Administrators Share Posted January 16, 2022 BIOS/UEFI in default use usb2 port reset nvram one time with coffelake desktop folder Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
GuitarFa12 Posted January 16, 2022 Share Posted January 16, 2022 10 hours ago, MaLd0n said: BIOS/UEFI in default use usb2 port reset nvram one time with coffelake desktop folder Thank you!! It worked and I was able to install the OS. The problem was the USB 3.0. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 16, 2022 Author Administrators Share Posted January 16, 2022 3 hours ago, GuitarFa12 said: Thank you!! It worked and I was able to install the OS. The problem was the USB 3.0. https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-2022-mojave-catalina-bigsur-monterey/ Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 17, 2022 Share Posted January 17, 2022 On 1/15/2022 at 9:23 PM, MaLd0n said: BIOS/UEFI in default use usb2 port reset nvram one time with coffelake desktop folder  Hi. I got problem... I've a Lenovo Ideapad 330 i7 8550U / NVIDIA GEFORCE MX150, with 2x USB 3.0, 1x USB Type C. When a click to install BigSur, my notebook restarts, and I saw that I need to plug my pendrive in USB 2.0.  How I do??  Thanks. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 17, 2022 Author Administrators Share Posted January 17, 2022 what ur nvme? just use olarila image with efi notebook kabylake Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 17, 2022 Share Posted January 17, 2022 27 minutes ago, MaLd0n said: what ur nvme? just use olarila image with efi notebook kabylake I've PNY 240GB 2.5 SATA 6Gbs .  Sorry, I'm layman.... Do you mean I have to download this EFI? -NoteBook KabyLake https://tinyurl.com/3993fcua Please, if that is, I've a question... Do I need to generate a SMBIOS a change the config.plist from EFI path?  Thanks. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 18, 2022 Author Administrators Share Posted January 18, 2022 17 minutes ago, Gustavo Germiniani said: -NoteBook KabyLake https://tinyurl.com/3993fcua Yes Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 18, 2022 Share Posted January 18, 2022 Just now, MaLd0n said: Yes 🤘  19 minutes ago, Gustavo Germiniani said: Please, if that is, I've a question... Do I need to generate a SMBIOS to change the config.plist from EFI path? Por favor, só me responde isso. Preciso? Thanks Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 18, 2022 Author Administrators Share Posted January 18, 2022 segue o tutorial depois vc faz isso. primeiro tem de ter o sistema instalado Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 18, 2022 Share Posted January 18, 2022 19 hours ago, Gustavo Germiniani said: -NoteBook KabyLake https://tinyurl.com/3993fcua Amigo, boa tarde. Fiz a instalação do BigSur e substitui com a EFI do link, mas o som, wifi, touchpad e outros drivers não estão funcionando. O que preciso fazer? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 18, 2022 Author Administrators Share Posted January 18, 2022 primeiro é usar o dsdt que já foi editado depois dê uma lida no Useful Links https://www.olarila.com/topic/6129-useful-links/ Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 18, 2022 Share Posted January 18, 2022 (edited) 42 minutes ago, MaLd0n said: primeiro é usar o dsdt que já foi editado Sobre o arquivo DSDT, já baixei... estou procurando, mas não acho onde e como devo usa-lo? Edited January 18, 2022 by Gustavo Germiniani Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 18, 2022 Author Administrators Share Posted January 18, 2022  Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 19, 2022 Share Posted January 19, 2022 4 hours ago, MaLd0n said:  No vÃdeo, quando abre o arquivo DSDT.aml, faz patch de dois arquivos txt : Mald0n Patch 01.txt e Mald0n Patch 02.txt... onde consigo esses arquivos? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 19, 2022 Author Administrators Share Posted January 19, 2022 o seu arquivo acima já tem os patches necessários Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Gustavo Germiniani Posted January 19, 2022 Share Posted January 19, 2022 7 minutes ago, MaLd0n said: o seu arquivo acima já tem os patches necessários No caso, meu config já tinha selecionado um arquivo SSDT que veio no EFI que baixei... Deixo somente o DSDT enabled? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 19, 2022 Author Administrators Share Posted January 19, 2022 sim. somente o dsdt Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
