Easy, Fast and Perfect Vanilla Hackintosh

[MaLd0n]

graphics no

[hyper metal]

Dear @MaLd0n

my pc is :

Msi mag b560m mortar

i5 10400f

RX580

where Efi file support for monterey or venturaa.thx in advanced

[MaLd0n]

ye

use efi folder for rocket lake. u can remove fakecpuid

[hyper metal]

16 minutes ago, MaLd0n said:

ye

use efi folder for rocket lake. u can remove fakecpuid

i've try for cometlake but no luck maybe rocketlake lucky one thx

[Hardik]

7 hours ago, MaLd0n said:

graphics no

Can't I just use any boot args for the same.....?

 

[MaLd0n]

13 hours ago, hyper metal said:

i've try for cometlake but no luck maybe rocketlake lucky one thx

-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

11 hours ago, Hardik said:

Can't I just use any boot args for the same.....?

-igfxvesa

[Gustavo P. Santana]

Olá, alguém poderia me ajudar a realizar o hackintosh desse notebook?

https://melhoresnotebooks.com.br/samsung-essentials-e20-np350xbe-kdabr-bom/

coloquei mais um pente de RAM de 4Gb nele como única alteração.

Grato desde já

2 minutes ago, Gustavo P. Santana said:

Olá, alguém poderia me ajudar a realizar o hackintosh desse notebook?

https://melhoresnotebooks.com.br/samsung-essentials-e20-np350xbe-kdabr-bom/

coloquei mais um pente de RAM de 4Gb nele como única alteração.

Grato desde já

Estou tentando pelo Clover com a EFI do Whiskey, mas estou caindo em bootloop sempre...

[Hardik]

2 hours ago, MaLd0n said:

-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

-igfxvesa

Can you give a detailed explanation of what would have to the gpu acceleration once I use this argument in hackintosh ... Also , is there any other method ... I really want to install hackintosh on my laptop and am eager to follow any instructions...

Thanks Maldon

[hyper metal]

10 hours ago, MaLd0n said:

-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

-igfxvesa

i've failed to boot.i don't understand what wrong

log.7z

[Singsic101]

Hi @MaLd0n

It's my bad, at the last minute I decided to buy the Gigabyte mobo instead of the Colorful brand, but to my surprise...it says Intel Core i3-10100 Comet Lake Quad-Core 3.6 GHz WITH GIGABYTE H410M-H V2 Ultra Durable Motherboard. The original reviews say H400M H only on the reviews, but this one has the box that says H410M H V2.
After building it, it doesn't boot! Not even turning on. Maybe because it does not have a GPU? I'm lost with this now. Could you advise, the seller post does not mention about having a dedicated GPU added to it, and the chipset says 

These are the specs:
Mobo: Gigabyte H410M (S2H) (H) (S2) V2 
CPU: Intel Core i3-10100 Comet Lake
SSD: Kingston A400 240GB
RAM: Kingston Fury Beast 8GB 2666Mhz DDR4 Non-ECC CL16 DIMM

PSU:Inplay 450W PSU
 

H410 M H V2 Mobo.zip

[MaLd0n]

Install system with -igfxvesa and save one ioreg

[Singsic101]

Hi @MaLd0n Thanks for the prompt reply - I noticed at the box it says Intel Chipset H470 series...will this work with iGPU then?

[jDiezmo]

thanks. 

Edited November 26, 2022 by jDiezmo
wrong link

[MaLd0n]

1 hour ago, Singsic101 said:

will this work with iGPU then?

i need check ioreg to confirm but v2 is suspect 😄

[Ventra22]

Hi guys l have Intel HD Graphics 630 Kaby Lake not showing graphics info?

Edited November 27, 2022 by Ventra22

[Singsic101]

Hi @MaLd0n Luckily the motherboard I got has Intel 470 chipset...and the culprit is the PSU - I used my PSU from my main PC and it booted. Now I got the Big Sur installed but the VGA monitor is not working, the HDMI monitor works fine...maybe I need -igfxvesa in boot args?

Edit: I added -igfxvesa in boot args but now the two monitors has same display - it mirrors not extend as another monitor.

Edited November 27, 2022 by Singsic101

[MaLd0n]

3 hours ago, Singsic101 said:

but the VGA

VGA is not good under macos, but some people report sucess. idk. need test.

[Singsic101]

Hi @MaLd0n

I was able to make the second monitor work: It is 1080p now but 60hz only - if I try 75hz it becomes discolored

2nd monitor is still very small at 1280 x 1024 

Here is my new IOreg: https://www.mediafire.com/file/4z9y8jxtexv9qg6/Jay%E2%80%99s_iMac_20.1_second_monitor_working_1st_monitor_small.ioreg/file

Edited November 27, 2022 by Singsic101

[rtnj1994]

How can I fix the audio on my hackintosh?, I installed the MacOS High Sierra on a different hard disk, and there is no audio, how can I fix this? 

I saw some solution like identfying the audio codec with hackintool, in my case it's ALC662, and then it's needed to edit some files on the EFI folder, changing the layout ID... I'm not sure about how to do it properly, please someone can help me?

 

[MaLd0n]

https://www.olarila.com/topic/6074-guide-easy-audio-solution-with-applealc-clover-and-opencore/

[dtonkz]

Hi,
I have a few questions can you help?

I downloaded the Ventura image, burned it to the usb stick with balenaetcher.
I used "EFI.Opencore.Desktop.RaptorLake.MOD" as efi. Change in EFI folder explorer++.

# After installation ethernet and wifi did not work. During the installation, the system reset after a few times "internet required" warning.
# When it opened, I ran opencore configurator and mounted the EFI folder.
# Run hackintool and it frezee app. Then the drivers and files on the desktop disappeared (finder didn't work)
# Runme app worked but I can't copy the prepared file. There is no internet connection either.

Whenever I log in and try to do something, the system freezes and resets after a while. In short, I open the system, but I cannot use it in any way.

Here are the ones that don't work.
Ethernet, Wifi, Bluetooth, Sound (hdmi sound ok, but mainboard not work)

My system:
CPU: Intel 13600K
Cooler: 140mm Liquid
Ram: G.Skill 16GB 3600Mhz
SSD: Samsung 860 Evo 250GB
HDD: Toshiba ABA300V 3TB
GRAPHICS: RX 570 4GB
MOBO: Msi Pro Z790-A Wifi DDR4
MOBO GRAPHICS: Intel UHD 770 (I'm not using)
MOBO Ethernet: Intel i225-V
MOBO Wifi/Bluetooth: Intel Wifi 6E AX211 160Mhz
MOBO Audio: ALC4080
Monitor: DELL S2721DS (have speaker I'm using hdmi audio)

My Efi;
ACPI : SSDT-OLARILA700.aml
Kexts: Lilu, VirtualSMC and Plugin SMCProcessor, itlwm, IntelBluetoothFirmware, IntelBluetoothInjector, IntelBTPatcher, AppleALC, AppleMCEReporterDisabler, RestrictEvents, WhateverGreen
I produced iMac20.2 serial using GenSMBios and processed it to config.plist.
BootArgs: -v alcid=12 watchdog=0 agdpmod=pikera

 

Note: I made a request for DSDT patch but got the file via runme app and windows11 with iasl. I haven't received any response yet.

 

Can you tell me what to do step by step?

Thank you in advance for your help.

[MaLd0n]

12 hours ago, dtonkz said:

MOBO: Msi Pro Z790-A Wifi DDR4

this intel lan card 2.5g lose support u can try with old kext AppleIntelI210Ethernet.kext.zip

12 hours ago, dtonkz said:

MOBO Wifi/Bluetooth: Intel Wifi 6E AX211 160Mhz

https://github.com/OpenIntelWireless/itlwm

[dtonkz]

@MaLd0n Hi,

The system is constantly resetting. Windows Server throws an error and when I say "ok" to the warning, the mouse hangs and the system resets.
I created new User and deleted old one, Windows Server error is gone. However, when I try to edit a file or open an application, the system resets without any action.

I activated the kexts you gave for ethernet and wifi with opencore configurator, but ethernet and wifi did not work yet. I will try again.

Thank you for your interest. Can you help with ACPI with runme app?

[MaLd0n]

save one ioreg

https://olarila.com/files/Utils/IORegistryExplorer.app.zip

[dtonkz]

@MaLd0n

IORegistry result.

Thank you again.

Mustafa iMac.zip