Easy, Fast and Perfect Vanilla Hackintosh

[dtonkz]

@MaLd0n

Hi,

I'm tired of constantly rebooting the system. I wanted macos to run, even if it was the previous version, and I downloaded the monterey image and burned it to the flash disk.
I copied the "..Raptor lake mod" efi as it is and tried to install it. I actually tried installing "Monterey" using the EFI folder I used for "Ventura".

 

I erased the disk and started the installation. The installation is over and frankly I still "waited for the system to reset" again.
However, after a few resets, the user creation screen came up and I created a profile because it made an Ethernet connection without any problems, and the system booted.

# Ethernet works without the need to install any .kext. (E210 automatically recognized)
# Bluetooth not working.
# Wifi is not working.
# CPU is running high frequently. (I can tell from the cooling fan noise)
# Some of the USB does not work.
# Hardware for audio appears to be USB2.0, I haven't tried it yet.
# Video card (RX570) works naturally.
I haven't tried with #UHD 770.
# Toshiba HDD is ok, Samsung SSD is ok.
# Runme app ran smoothly and saved the results.

# The system may be missing, frankly, something I don't understand at all. However, after the installation of "Ventura", it did not reset even once after it was turned on.

It is very fluid and continues to work without using "hackintool" or "OCC".

Now I will try to delete the existing windows11 and run "Monterey". If I can do it properly, then I will reinstall Windows 11 and try for the EFI partition.

Conclusion: I'm definitely having trouble installing "ventura" with "olarila ventura image" and "raptor lake mod".
But it provides hassle-free installation for "monterey".

 

Finally, I'm attaching the "runme app" results in the hope that it will work.

 

In my opinion: "Ventura" definitely needs work on hackintosh. Because "ventura" doesn't work with same "EFI" but "monterey" does.

Thank you for everything, I look forward to your feedback.

Send me Mustafa-iMac-Pro.zip

[MaLd0n]

2 hours ago, dtonkz said:

@MaLd0n

save one ioreg 

https://olarila.com/files/Utils/IORegistryExplorer.app.zip

[norman0286]

Hello, I am able to upgrade from Big Sur to Monterey my machine intel 4690k intel graphics 4600 12 GB RAM. installing Big Sur did not give me headache it was a cinch everyhing was doing fine sound, dual display, internet, camera etc.. but when I upgraded to Monterey I got the problem of the display when I move my mouse the display flickers and one monitor can display. What is the fix for this, Anyone who got the same problem and was able to resolved, please share..  Thank you very much need help for I use the dual monitor for my programming tutorials. Thank you and GOD bless.

[Edkroket]

Hi, I have Asus X99 E 10G BIOS updated to latest and Xeon E5 1620 v2 CPU running High Sierra with Clover. Now I want to make fresh install of Monterey and OpenCore. I have used different of Your EFI folders but none of them match exactly as the CPU is Ivy Bridge E in fact while board is X99. So after a few hours with no luck I'm unable to start from any of your EFI folders.

EFI folder to test would be nice.

So could you help me out here? I will donate more then just a beer.😊 

[MaLd0n]

10 hours ago, Edkroket said:

Hi, I have Asus X99 E

In this case is Broadwell-E or Haswell-E efi folder

[Edkroket]

I have tried them both and both give me KP? I have Xeon 1620 v2 CPU so I guess I need other CPUmask?

Also I have booted with a modified EFI folder of Broadwell-E and put this in CPU section:
Cpuid1Data: D7060200 00000000 00000000 00000000

Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000

Also I put the SSDT-X99.aml 
This way I can boot at least but it's slow and internal drives are shown as external?. So am I missing something here?

 

Edited December 5, 2022 by Edkroket

[MaLd0n]

2 hours ago, Edkroket said:

I have tried them both and both give me KP? I have Xeon 1620 v2 CPU so I guess I need other CPUmask?

this processor is Ivy Bridge EP. i think need other ofc

[Edkroket]

18 hours ago, MaLd0n said:

this processor is Ivy Bridge EP. i think need other ofc

I have tested that EFI folder as well but not even KP and nothing happens.

[Edkroket]

On 12/5/2022 at 11:48 PM, MaLd0n said:

this processor is Ivy Bridge EP. i think need other ofc

I made a mistake with CPU. I have this hardware:
Asus X99-E 10G WS MB
Xeon E5-2697 v4 2,3GHz 18core
256GB RAM
AMD Radeon™ PRO W6600 8GB
HighPoint SSD7101A-1

I can run Monterey with Broadwell-E X99 EFI folder but only if I put this

Cpuid1Data: D7060200 00000000 00000000 00000000
Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000

At the kernel section. But internal drives are shown as external (Yellow) and if I install drivers for the HighPoint PCI cards I end up with black screen. I have attached my config file. Can you pleas check if I make mistake here?
Hope someone can tell me what is wrong here.

Thanks Ed

config.plist.zip

Edited December 7, 2022 by Edkroket

[MaLd0n]

1 hour ago, Edkroket said:

I can run Monterey with Broadwell-E X99 EFI folder but only if I put this

Post one Full Dump
https://olarila.com/files/Utils/RunMe.app.zip
and one Ioreg
https://olarila.com/files/Utils/IORegistryExplorer.app.zip

[Edkroket]

Here is download link as the size is bigger then 2.93 MB 

https://www.applesupported.nl/nextcloud/index.php/s/PpKQbY9Pqs3YKN7
and IOreg
https://www.applesupported.nl/nextcloud/index.php/s/QXGTzfyq7mX96Yf

These links expire in two days. Let me know what you can find out. And right now from today the machine starts to reboot randomly?

 

Edited December 7, 2022 by Edkroket

[MaLd0n]

On 12/7/2022 at 4:52 PM, Edkroket said:

Here is download link as the size is bigger then 2.93 MB

DSDT.aml.zip

[Edkroket]

9 hours ago, MaLd0n said:

DSDT.aml.zip 30.01 kB · 0 downloads

Thanks so only this instead of x99.aml and same configfile?

[MaLd0n]

22 minutes ago, Edkroket said:

Thanks so only this instead of x99.aml and same configfile?

use only dsdt.aml and add entry on config.plist, reboot.

[Xixoa]

Hi, got the full dump from regme, do you need the DSDT for full patch or whole dump? I believe only the DSDT, but it is my first time so I am beeing bit insecure.

cheers and thanks

 

edit: the whole dump was like 5Mb so couldn't post it here

DSDT.zip

Edited December 13, 2022 by Xixoa

[vipking]

for some reason i cant install mocos 

[gustavohenrique123]

alguem me ajud por favor?, eu abro o mac os monterey e sempre fica na minha tela falando que e para mim emparelhar um teclado e eu nao consigo mais fazer nada so fica naquela tela

[MaLd0n]

Use teclado e mouse usb

[souofabiano]

Olá! Alguém poderia me ajudar? Tentando instalar o Hight Sierra no notebook Lenovo Ideapad 320. Sempre fica parado na tela pedindo para conectar mouse. Estou usando mouse USB e ele fica congelado na tela e não acontece nada. Se eu pressiono a tecla espaço avança, mas o mouse não funciona e não consigo prosseguir com a instalação.

O estranho é que há poucos dias consegui instalar o Monterey, mas ficou muito pesado. Aconteceu a mesma coisa, mas acabou funcionando. Com o High Sierra não funciona mesmo. 

Já tentei usar outras EFI nada deu certo. Estou usando OpenCore. Alguém tem alguma ideia? Obrigado

[MaLd0n]

High Sierra é muito antigo. use pelo menos o bigsur

[souofabiano]

1 hour ago, souofabiano said:

Estava usando o Monterey, o problema é que meu notebook é um i3 com VGA integrada, ficou muito lento o sistema, mesmo para coisas simples como abrir documentos e usar internet. Travando até para abrir e fechar pastas. Pesquisei e vi que os sistemas com api metal são para hardwares mais potentes, então optei pelo High Sierra que usa a API OpenGL, para ver se o desempenho melhora. Estou com 12GB de memória RAM.

 

Consegui resolver o problema do mouse congelado na instalação.
Acontece que o Ideapad 320 possui somente 2 portas USBs e por algum motivo, uma delas não reconhece mouse e teclado usb durante a instalação. Mantive o pendrive de boot na que não reconhece teclado e usei a outra para iniciar, com o teclado usb conectado. Na tela que pede o mouse, apertei espaço e avancei e então conectei o mouse usb onde estava o teclado e ele funcionou. Agora, já estou instalando o sistema. Tomara que dê certo!

De qualquer forma, muito obrigado!

[ZetsubouPlayer]

I got stuck on the menu instalation, i select "Install macOS Ventura" and i click continue but nothing happen, how to fix it ?

[MaLd0n]

8 hours ago, ZetsubouPlayer said:

I got stuck on the menu instalation, i select "Install macOS Ventura" and i click continue but nothing happen, how to fix it ?

what hardware spces?

[Bastien Andrieux]

On 11/22/2021 at 3:20 PM, MaLd0n said:

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

 

Some Basic Information

-Use USB2 port for easy installation with no remap USB

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

 

Bios/UEFI Configuration

-Sata = AHCI mode

-Secure Boot = Disable if need

-CSM = Disable with AMD cards

 

*If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

*You can request one full ACPI solution HERE and Premium Users HERE

*After installation you need remove unnecessary files like unused Lan kexts

*If your GPU don't need agdpmod=pikera, remove this bootarg

*If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

*Users with IGPU need change SMBIOS (example: for Skylake Processor change smbios iMacPro1,1 to iMac17,1)

*Generate a good and valid serial for you

 

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux)
https://www.olarila.com/topic/6278-hackintosh-and-macintosh-olarila-vanilla-images-macos/

1b) How to create USB Installer (Mac)
https://www.olarila.com/topic/6185-guide-how-to-create-personal-vanilla-macos-image-or-usb-installer/

 

Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux)

2a) Download Link https://www.balena.io/etcher/

 

Step 3 - Downloading correct EFI folder for your hardware (Clover or OpenCore)

3a) https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

 

Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows)

4a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

 

Step 6 - Copying EFI folder to SSD EFI partition after Installation

6a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 7 - Starting a real fine tune with full ACPI solution

7a) Extracting full Dump with RunMe.app

https://www.olarila.com/topic/10301-hackintosh-olarila-runme-dumper-app/

7b) Posting full dump for one full ACPI solution

-Donators and Premium users have a personal room for that. Check link bellow.

https://www.olarila.com/forum/84-dsdt-patch-requests/

-Check link bellow about Premium and Donators users

https://www.olarila.com/topic/7717-important-premium-and-donators-users/

-DSDT patch requests (Post in this topic if you want FULL DSDT patched, please don't open a new topic, unless you are trying to learn how to do it yourself and need help.)

 

Step 8 - USB Port Mapping

8a) https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/

 

Step 9 - Dual Boot with OpenCore and Full ACPI Solution

9a) With Official OpenCore

https://www.olarila.com/topic/13019-hackintosh-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/

9b) With MOD Opencore

https://www.olarila.com/topic/24542-opencore_no_acpi-opencore-with-additional-featureschanges-implemented/

 

Step 10 - How to update OpenCore bootloader

10a) https://www.olarila.com/topic/14268-how-to-update-opencore-bootloader-on-hackintosh-easy-and-fast-way/

 

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

Hello, I have a Lenovo Legion 5 laptop with a ryzen 7 5800h and a rtx 3060, I would like to know if a hackintosh is possible? and can you give me an efi file if you have it?
Thanks cordially

[ZetsubouPlayer]

18 hours ago, MaLd0n said:

what hardware spces?

Processor core i5 4590

Intel HD Graphic 4600

RAM 8GB DDR3