OS X 10.8 Mountain Lion bootable USB

[vtempest]

I have installed this OS from USB and the chameleon bootloader. I have not done anything regarding DSDT/smbios/etc

The OS boots from the USB, but not from the laptop HDD.

Wireless and laptop touchpad do not work, and the system keeps giving me a message to find a bluetooth keyboard.

What are the appropriate kexts to install? Please guide me through the process as per my specific hardware

Can I triple boot Ubuntu-Mac-Windows with the GRUB bootloader?

How do I mark my Windows partition as a boot partition?

 

positive.png 8086 Intel Corporation 1e57 HM77 Express Chipset LPC Controller Bridge ISA bridge

check.png 8086 Intel Corporation 1e3a 7 Series/C210 Series Chipset Family MEI Controller #1 Communication controller Communication controller

check.png 8086 Intel Corporation 1e31 7 Series/C210 Series Chipset Family USB xHCI Host Controller Serial bus controller USB controller

check.png 8086 Intel Corporation 1e2d 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 Serial bus controller USB controller

check.png 8086 Intel Corporation 1e26 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 Serial bus controller USB controller

positive.png 8086 Intel Corporation 1e22 7 Series/C210 Series Chipset Family SMBus Controller Serial bus controller SMBus

check.png 8086 Intel Corporation 1e20 7 Series/C210 Series Chipset Family High Definition Audio Controller Multimedia controller Audio device

positive.png 8086 Intel Corporation 1e12 7 Series/C210 Series Chipset Family PCI Express Root Port 2 Bridge PCI bridge

positive.png 8086 Intel Corporation 1e10 7 Series/C210 Series Chipset Family PCI Express Root Port 1 Bridge PCI bridge

check.png 8086 Intel Corporation 1e03 7 Series Chipset Family 6-port SATA Controller [AHCI mode] Mass storage controller SATA controller

negative.png 8086 Intel Corporation 0887 Centrino Wireless-N 2230 Network controller Network controller

check.png 8086 Intel Corporation 0166 3rd Gen Core processor Graphics Controller Display controller VGA compatible controller

check.png 8086 Intel Corporation 0154 3rd Gen Core processor DRAM Controller Bridge Host bridge

check.png 10ec Realtek Semiconductor Co., Ltd. 8136 RTL8101E/RTL8102E PCI Express Fast Ethernet controller Network controller Ethernet controller

Edited September 18, 2012 by Guest

[hasnat]

Hey I make the setting in org.chameleon.boot.plist file as per the Link whic is mentioned below

http://www.insanelymac.com/forum/index. ... pic=257464.

And do the changes smbios.plist file as per you say use macbookpro8,1.

After that boot from HDD......!

While for a sometime i do not get any error Like as incorrect image signature.

But after some loading Which Screen show with apple Logo after that a screen crash and my laptop was restart......!

Please tell the seeting of org.chameleon.boot.plist. May be i did wrong in that file.

I need your help badly regard in that matter......!

[artur-pt]

hi

the link don't work

good hack

[hasnat]

Hey...!

Here is the Link

http://www.insanelymac.com/forum/index.php?showtopic=257464

[artur-pt]

hi

and ?????

the link is the post for chameleon wizard ....

i don't understand what u ask...

good hack

[vtempest]

Hi I think my post was missed. I have installed this OS from USB and the chameleon bootloader (I have not done anything regarding DSDT/smbios/etc). The OS boots from the USB and the keyboard works but laptop touchpad doesn't. When I boot OS from Harddrive, then wireless and keyboard and touchpad do not work, and the system keeps giving me a message to find a bluetooth keyboard.

What are the appropriate kexts to install?

 

positive.png 8086 Intel Corporation 1e57 HM77 Express Chipset LPC Controller Bridge ISA bridge

check.png 8086 Intel Corporation 1e3a 7 Series/C210 Series Chipset Family MEI Controller #1 Communication controller Communication controller

check.png 8086 Intel Corporation 1e31 7 Series/C210 Series Chipset Family USB xHCI Host Controller Serial bus controller USB controller

check.png 8086 Intel Corporation 1e2d 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 Serial bus controller USB controller

check.png 8086 Intel Corporation 1e26 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 Serial bus controller USB controller

positive.png 8086 Intel Corporation 1e22 7 Series/C210 Series Chipset Family SMBus Controller Serial bus controller SMBus

check.png 8086 Intel Corporation 1e20 7 Series/C210 Series Chipset Family High Definition Audio Controller Multimedia controller Audio device

positive.png 8086 Intel Corporation 1e12 7 Series/C210 Series Chipset Family PCI Express Root Port 2 Bridge PCI bridge

positive.png 8086 Intel Corporation 1e10 7 Series/C210 Series Chipset Family PCI Express Root Port 1 Bridge PCI bridge

check.png 8086 Intel Corporation 1e03 7 Series Chipset Family 6-port SATA Controller [AHCI mode] Mass storage controller SATA controller

negative.png 8086 Intel Corporation 0887 Centrino Wireless-N 2230 Network controller Network controller

check.png 8086 Intel Corporation 0166 3rd Gen Core processor Graphics Controller Display controller VGA compatible controller

check.png 8086 Intel Corporation 0154 3rd Gen Core processor DRAM Controller Bridge Host bridge

check.png 10ec Realtek Semiconductor Co., Ltd. 8136 RTL8101E/RTL8102E PCI Express Fast Ethernet controller Network controller Ethernet controller

[artur-pt]

hi

see this

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

and install one the voodoops2 or appleps2

good hack

[vtempest]

I have tried this but it causes a kernel panic on boot. What are the rest kexts to install fr my hardware?

[artur-pt]

hi

google for it ...

mac os x vendor id : dev id

in the post are info how to obtain the necessary kext

good hack

[Brandon1]

first off, can this be put on a dvd from the windows computer? and second this can coincide with windows 7 professional right?

thanks Brandon

[vipulucky]

Got your torrent for Mountain Lion USB for PC.

I tried making bootable USB through both SUSE Studio and Win32 Image Writer from Windows.

Both wrote successfully, but when I try to boot the USB, it doesn't boots. Normal bootloader appears after a few seconds.

Please help

P.S:

USB is at top in Boot Order. Already tried switching SATA to AHCI from IDE.

Dual boot Windows 7 + Ubuntu 12.04 system.

Bootloader: GRUB

Model: HP CQ 420

Motherboard: Intel Mobile 4 Series

Cannot try DVD, my DVD-ROM doesn't works.

[artur-pt]

hello

post u config

ML is 64 bit

cpu

graphics

ram

good hack

[vipulucky]

config:

Processor: Intel Core2Duo 2.1 GHz

Ram: 2GB DDR3

Graphics: GMA 4500MHD (Accelerated upto 1GB)

[artur-pt]

hi

the ram is short, is the minimum

about the graphics, is not supported in mac os x

but if u want to boot, the installer

remove from system/library/extensions

appleintelhd*.kext all of them

good hack

[vipulucky]

Thanks for your suggestion. Will try that.

I just want xcode running, nothing else. Couldn't get much performance in VMware that's why going for a hackintosh dual boot.

Actually I want a triple boot. ML + Win7 + Ubuntu. (same order, GRUB last)

Any warnings or suggestions about triple boot?

[artur-pt]

hi

to avoid problems

grub must be in linux partition

chameleon make the triple boot

good hack

[vipulucky]

hi

but if u want to boot, the installer

remove from system/library/extensions

appleintelhd*.kext all of them

 

Sorry but it didn't worked

First I removed:

System/Library/Extensions/AppleIntelHDGraphics.kext

System/Library/Extensions/AppleIntelHDGraphicsFB.kext

But it didn't helped

Then I removed these too:

System/Library/Extensions/AppleIntelHDGraphicsGA.plugin

System/Library/Extensions/AppleIntelHDGraphicsVADriver.bundle

But again no help. Didn't worked in any case.

It still pauses for 2 seconds and then GRUB continues.

I hope everything is OK with the USB and files that were written to USB.

http://imgur.com/ZFOnH

http://imgur.com/f4NNN

[artur-pt]

hi

remove all appleintelhd*.kext

and boot

-f GraphicsEnabler=No

to see where it stop

good hack

[vipulucky]

remove all appleintelhd*.kext

and boot

-f GraphicsEnabler=No

to see where it stop

Sorry, but it doesn't boots at all. I have already removed all appleintelhd*.kext.

There is just a black screen for 2 seconds and then my normal bootloader.

My issue is that the USB isn't booting at all, although it is at the top in boot-order and I have also tried selecting it manually from the boot device list.

I can only try commands when I get a boot prompt or something. But all I get is my normal bootloader.

[vipulucky]

Got USB booting. Burned file to USB through linux command line and set up USB partitions.

I have some questions:

remove all appleintelhd*.kext and boot

1. Is it necessary to remove them or just precautionary for my system with only GMA 4500MHD graphics. I tried booting without deleting them and it booted.

2. Is it possible to install OS X keeping my current OS intact (Win7+Ubuntu 12.04 dual-boot) with GRUB being the default boot loader? Most guides on the internet advice to install OS X first, then win7 and then ubuntu/linux.

[Artycfox]

Hi,

I am trying to install install OS X 10.8 Mountain Lion bootable USB, and using Wait=Yes i can see it stops at System/Library/Extension/TMSafety.kext/Contents/MacOs

then a black screen appears and it doesn't change.

I already used TransMac to remove all ATI, AppleIntelHD, AppleIntelSNB, and NVDA kexts and tried to write many comands such as GraphicsEnabler=No, -f, -x, -s

My components:

Intel Pentium D 935 CPU 3.20GHz

Mainboard: ASUS P5B-Deluxe P965/G965

RAM: Kingston PC2-6400 CL6 DDR2 2047MB

GPU: NVIDIA GeForce 7600 GT 256MB

HD: 250GB (I had Windows XP and I formated my HD with Gparted to HFS+, its cleaned now)

BIOS: Version 0711, Date 09/29/2006 (in the BIOS menu I set my SATA HD as AHCI in stead of IDE)

Can anyone help me finding the problem? How can i solve this? I am a little sceptic that my Processor can't handle this installation...

[vipulucky]

Intel Pentium D 935 CPU 3.20GHz

Mountain Lion is a 64-bit OS. Are you sure your processor supports 64-bit architecture?

I guess that might be the problem.

[artur-pt]

hello

@Artycfox

have u in bios disable bit on ?

good hack

[Artycfox]

Thanks for the answers.

Well I am sure my Pentium D supports 64-bits. I think the problem resides somewhere in other aspects of its architecture, in combination (maybe) with a BIOS that needs to be "replaced".

First, I will buy an alternative, more compatible processor, a Core 2 Duo.

If I succeed installing Mountain Lion with this new feature, I will tell you. If so, it means the problem is the old processor and we can be sure that pentium D 935 can't support Mountain Lion, and people with a processor like my own don't need to waste time trying to install it.

Cumps

[q111]

Hi, thanks for the release, having an issue though.

Acer Aspire V3 -571g

i5 2450m, intel HD3000/nVidiaGT630m - graphics set to integrated in bios, 4GB ram

I installed fine but when I try to load I am getting a few different errors or hangs when trying to load the HDD on which ML is installed.

1. -f -F

http://i.imgur.com/xmeD2.jpg <--- this just keeps loading, no HDD activity

2. -f

Loads to http://imgur.com/0vnvB

When I press enter it loads to

http://imgur.com/48bhl <-- unresponsive from here, no HDD activity

3. GraphicsEnabler=No -f -F

Loads to http://imgur.com/NIdqA <-- unresponsive from here, no HDD activity

I used TransMac to remove the video kext and reinstalled on a different drive which loads to

http://imgur.com/d3htn <-- unresponsive from here, no HDD activity

Any help would be appreciated, thanks again for the release.