OS X 10.8 Mountain Lion bootable USB

[calibra74]

I've a Lenovo X201 (I5 M540 2.53Ghz, Intel HD, 6GB RAM) and trying to install ML on it.

It hangs during installation after AppleHCIBluetooth completed message.

I'm using Olarila USB iso with FakeSMC and NullCPU

below my systeminfo

Any help?

[oldman20]

Help me! i using laptop ASUS K53SV_SX850SX850

http://phucanh.vn/product-9094/ASUS-K53SV-SX850K53SV-3CSX-NAU-BONG.html

I try install this Mac X Lion and successed without any Boot Flags!

Then i restart, choice boot from USB, enter at hightlight Mac Lion ( this name of partition i installed Mac Os), then it loader same install! It stop at this:

Please help me! How i can fix this problem?

[artur-pt]

calibra74

I've a Lenovo X201 (I5 M540 2.53Ghz, Intel HD, 6GB RAM) and trying to install ML on it.

It hangs during installation after AppleHCIBluetooth completed message.

I'm using Olarila USB iso with FakeSMC and NullCPU

hello

u graphics card is not supported in mac os x 8086:0046

u can install it removing from the usb te appleintelhd*.kext

but no graphics acceleration

good hack

[artur-pt]

oldman20

 

Help me! i using laptop ASUS K53SV_SX850SX850

try to delete Geforce.kext in System/Library/Extensions

if don't work

see this

http://Olarila.com/forum/viewtopic.php?f=3&t=1339

use translator portuguese ....

good hack

[ferroca]

I am using Acer Aspire 4710. Intel core2DuoT5500, Intel® 945GM Express, 2GB ram. http://support.acer.com/acerpanam/notebook/0000/Acer/Aspire4710/Aspire4710sp2.shtml

I have downloaded and made bootable usb when I boot in verbose mode It stuck at this screen.

Kindly help...

[akkhaing1]

hello

gma4500 is not supported

remove from the installer all appleintelhd*.kext

and try to boot

-f

good hack

 

Thanks. ML was installed successfully after removing "appleintelhd*.kext"

I have a few more problems. Probably my Acer Aspire x3900 is outdated.

1. I installed various version of Voodoo HDA but no sound . My audio is Intel 5 series/3400 Series chipset HDAudio Device ID 3b56.

2. Network is not working. I did get connected once but unplug after restart. ethernet was visible at least at that time. However, noethernet after I clean installed again after that, I installed AppleIntelE1000e.kext but no luck. adapter was shown in System info but not in network in system preference.

I reinstalled the kext and repaired permission. reboot with -f without success.

3. In have win7, OSX Lion in one HD, I installed ML in another HDD connected via esata docking. I could not boot ML fromChameleon bootloader installed with Lion in dual boot. I have to use USB to boot from installed ML HDD again. I could not use chameleon wizard because no internet connection. I installed Chamemeon 2.1 and copy extra fromUSB.

Hope someone can help me.

thanks

[artur-pt]

hello

about the ethernet kext i see some issues with that dev id

try this one, i really don't know if works

 

AppleIntelE1000e.kext.zip

 

about u sound and voodoohda see the post

http://Olarila.com/forum/viewtopic.php?f=18&t=454

and follow the instructions

about the boot if the hd in dock is not see in bios ...

u can not boot from him

good hack

[calibra74]

I've a Lenovo X201 (I5 M540 2.53Ghz, Intel HD, 6GB RAM) and trying to install ML on it.

It hangs during installation after AppleHCIBluetooth completed message.

I'm using Olarila USB iso with FakeSMC and NullCPU

hello

u graphics card is not supported in mac os x 8086:0046

u can install it removing from the usb te appleintelhd*.kext

but no graphics acceleration

good hack

 

Thanks for your answer, but I forgot to mention that I did already but without luck. I've removed the AppleIntelHD*.kext from S/L/E but I've left AppleIntelSNB*.

Maybe the issue is somewhere else?

thanks

[artur-pt]

hello

remove all, do what i tell u to do

good hack

[oldman20]

Help me! i using laptop ASUS K53SV_SX850SX850

try to delete Geforce.kext in System/Library/Extensions

if don't work

see this

http://Olarila.com/forum/viewtopic.php?f=3&t=1339

use translator portuguese ....

good hack

 

I find that folder only found NVD kext, that Geforce kext?

Then i try reboot from USB, choose install partition, and still nothing.......

I try following instruction of topic http://Olarila.com/forum/viewtopic.php?f=3&t=1339

and this is notice appear:

USB Notification: The device "HubDevice" @ 0x1d100000 has caused an overcurrent condition. The port it is attached to has been disable

What this error? help me, please!

sr because my english is bad

[samma89]

Hello.., First thank you for this. really.. i always wanted to use MAC OS X in my pc. SO thank you for that.

also i need to know about small thing..? is it possible to dual boot with windows? just wondering?

THank you so much..

[akkhaing1]

hello

about the ethernet kext i see some issues with that dev id

try this one, i really don't know if works

 

Brasileiro_ABNT2.bundle.zip

[oldman20]

Wow, it worked! After i try delete kext of graphic and AppleIntel, reboot and it's done. that's amazing

Thanks you for all

[chrisjnz]

Hi, What you have done looks fantastic! I only hope I can get it to work.

I have an issue during step 2:

2 - Boot the USB drive and install.

 

It panics right after NullCPUPowerManagement::start:

Some Googling suggests the error may be fixed with a different BIOS?

According to SONY I have the latest BIOS for my system.

Also I have created a partition and formatted it as HFS+ Primary. It's the fourth of four primary partitions on the HDD

It does not show when initially booting from the USB stick.

Is that normal?

Here are my laptop specs

System Model VPCEA1AGG

System Type x64-based PC

Processor Intel® Core i5 CPU M 540 @ 2.53GHz, 2534 Mhz, 2 Core(s), 4 Logical Processor(s)

BIOS Version/Date American Megatrends Inc. R0300Y8, 20/07/2010

Installed Physical Memory (RAM) 4.00 GB

My laptop hardware is as new, full specs of exact model here: http://www.sony-asia.com/product/vpcea1agg

Can anyone please help?

[calibra74]

hello

remove all, do what i tell u to do

good hack

 

Thanks very much, it worked but I had to use "npci=0x3000"

[CJ2266]

Can some one please make a video or send me a link to one because I'm so confused and I'm new to this I try -v get that grey screen I tried graphic enabler=yes -v and I tried graphicenabler=no still grey screen I saw that I needed to delete these kets but how I have no acces to a mac or os x

[artur-pt]

Hi, What you have done looks fantastic! I only hope I can get it to work.

I have an issue during step 2:

 

It panics right after NullCPUPowerManagement::start:

hello

must read the toppics is well explained that error

http://Olarila.com/forum/viewtopic.php?f=27&t=1627

If you get KP related to ApplePolicyControl.kext remove /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePolicyControl.kext

good hack

[e1andonsea]

where i can download the following kexts?

AHCIPortInjector.kext

AppleACPIPS2Nub.kext

IOAHCIBlockStorageInjector.kext

PXHCD.kext

VoodooPS2Controller.kext

VoodooPS2Keyboard.kext

VoodooPS2Mouse.kext

VoodooPS2Trackpad.kext

many thanks!

[oldman20]

excuse me, how to burn this raw file to dvd boot?

[artur-pt]

hi

http://Olarila.com/forum/viewtopic.php?f=27&t=1644

http://Olarila.com/forum/viewtopic.php?f=27&t=1627

[bishtsaket]

H!! i love your post. I am new to Hackintosh. I write a pen drive with susi. But when i try to instal os from it, giving me 'still waiting for root device'. I also uplod a pic of it. I try to remove intel drivers from disk and try to start with GrahicsEnabler=no but nothing happen please help. My system configuration is core i7 ram 4 gb graphics intel hd 3000. I am using Dell xps 15. Please help many thanks...

[artur-pt]

hello

try

-v npci=0x2000

-v npci=0x3000

for the still waiting

good hack

[bishtsaket]

No luck i try these

-v npci=0x2000

-v npci=0x3000

please help.....

[artur-pt]

hi

try this kext

http://netkas.org/?p=1072

iopcifamilly from netkas

good hack

[oldman20]

hi

http://Olarila.com/forum/viewtopic.php?f=27&t=1644

http://Olarila.com/forum/viewtopic.php?f=27&t=1627

Thanks you! .

One question: i try install chameleon to boot from HDD, but after reboot i cant see menuboot of chameleon, it automatic boot to win7 .Now i still boot to Mac os by press esc, choice boot from USB

Would you can guide me how to use chameleon and kext wizard by picture? sorry because i'm a newbie, i try use they many, but always reinstall mac os, because it panic, i'm afraid my way not true!

sr, because my english so bad

Oh, want to say thanks u for all! . Have nice week!

ps: why 4rum have any thank button?