DSDT patch requests

[ziomalex]

[ref]ziomalex[/ref], voodoohda, need check about applealc on amds

I know that applealc is supported for zen processors but the problem is that clover see my sound card as an unknown sound codec so I think it is something with ACPI related problem are you able to check my clover and see if there is something you can do?

[Speedal]

Hi MaLd0n,

I thought I had resolved most of my needs with the message on inasanelymac, but I'm still in need of a DSDT. Plus, I have to use the LAN (and the the router is at 10 mts, in the next room ) since if I try to install my Archer AC 600 T2U (V.1) Nano usb wifi port with the TP link drivers (https://www.tp-link.com/us/support/download/archer-t2u-nano/#Driver) I get everything messed up and the Mojave disk simply won't find the right entry to boot OS X. So I have to start again installation .

Can you please help me?

Send me iMac-di-Alberto.zip

[jrapbit]

PLs help

Send me Jills-MacBook-Pro.zip

[MaLd0n]

[ref]okia123[/ref], DSDT.aml.zip

 

Added in 3 minutes 17 seconds:

[ref]Speedal[/ref], DSDT.aml.zip

 

Added in 3 minutes 46 seconds:

[ref]jrapbit[/ref], DSDT.aml.zip

DSDT.aml.zip

DSDT.aml.zip

[jrapbit]

Added in 3 minutes 46 seconds:

[ref]jrapbit[/ref], DSDT.aml.zip

thank you! Everthing works only one problem. When I plug the charger it freeze. Any clue?

thanks again.

[MaLd0n]

[ref]jrapbit[/ref], apply a battery patch

[vikindap]

Added in 4 minutes 43 seconds:

[ref]vikindap[/ref], DSDT.aml.zip

 

Seems _SB.PCI0.RP17.PXSX not disabled.

I decompiled the DSDT.aml you provided and ran file diff and I see a lot of methods being removed and some addition being made. fyi, I have bene reading ACPI specification and I am half way through and currently doing little experiments. It would be cool if you list out the fixes that you have carried out in the patch.

Also I have been trying to disable the M.2 Slot by myself by using https://www.tonycrapx86.com/threads/guide-hackrnvmefamily-co-existence-with-ionvmefamily-using-class-code-spoof.210316/ and https://www.tonycrapx86.com/threads/guide-disabling-discrete-graphics-in-dual-gpu-laptops.163772/ but in vain.

[chris77]

New run me file as requested, in clover options fake ID set to 00000000.

still without any improvement with wifi.

Thanks for helping out.

Send me Kriss-MacBook-Air.zip

[Rackers]

Rackers, u need use last version, maciasl with last acpica

https://github.com/acidanthera/MaciASL/ ... ELEASE.zip

 

Thank you, sleep is now working!

[BlonduRoo]

HI MaLd0n. DSDT k. System info good, but sleep doesn't work properly. Please help...

Edited May 1, 2019 by Guest

[Osk]

Hi [ref]MaLd0n[/ref], after using your DSDT file. My cpu is almost always at top frequency, and like 5 degrees hotter. Before the patch cpu goes down to 1.0 ghz in idle, now is jumping from 1.3 to 3.6 constantly in idle. Sleep do not work neither, black screen after waking up but I give up about that months ago, doesn't bother me. I attach a new send me file to check how a have my config.pls file.

thanks

Send me Efras-iMac.zip

Edited May 1, 2019 by Guest

[mattedsnooze]

Added in 2 minutes 15 seconds:

[ref]mattedsnooze[/ref], DSDT.aml.zip

 

Thanks. System info now good.

But sleep doesn't work properly. Comp goes down sleep, fan off and after 2-5 sec start again, but monitor not wakeup...

Please help...!

[MaLd0n]

[ref]vikindap[/ref], IN PREVIOUS DSDT I DONT DISABLE IT, TRY NOW

DSDT.aml.zip

[MaLd0n]

[ref]chris77[/ref], test usb2 now

DSDT.aml.zip

 

Added in 44 seconds:

[ref]BlonduRoo[/ref], what happens with sleep?

Added in 1 minute 32 seconds:

[ref]Osk[/ref], with my DSDT u have a native, without no, check what cause it, u can use a simple plugin type=1 in config.plist

Added in 47 seconds:

[ref]mattedsnooze[/ref], remove _prw into device xhc and use power button for wake, check if work

[elcapitan2016]

Hello , Good Day

I have problem on my laptop I just install Mojave for my laptop everything is fine except my HD-4600 intel graphics card it's only 4mb

I cannot change my video memory to 64mb as my Toshiba Bios is different

Please help me to fix my hd-4600 video card

PS does Mojave have ktext for alps trackpad ?

Looking forward for a help

PS

@maldon

I donate with different email account

2 May 2019 at 10:14:59 AM GMT+8Transaction ID: 7KU58612JH126690Y

Thanks you so much again

Send me name-MacBook-Air.zip

[MaLd0n]

[ref]elcapitan2016[/ref], DSDT.aml.zip

 

add it

<key>PciRoot(0)/Pci(0x02,0)</key>
		<dict>
			<key>AAPL,ig-platform-id</key>
			<data>BgAmCg==</data>
			<key>device-id</key>
			<data>EgQAAA==</data>
			<key>#hda-gfx</key>
			<string>onboard-1</string>
			<key>#AAPL00,override-no-connect</key>
			<data></data>
			<key>#AAPL00,override-no-edid</key>
			<data></data>
			<key>framebuffer-patch-enable</key>
			<integer>1</integer>
			<key>framebuffer-cursormem</key>
			<data>AACQAA==</data>
			<key>## @1 HDMI</key>
			<string></string>
			<key>#framebuffer-con1-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con1-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con1-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con1-pipe</key>
			<data>EgAAAA==</data>
			<key>## @2 HDMI</key>
			<string></string>
			<key>#framebuffer-con2-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con2-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con2-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con2-pipe</key>
			<data>EgAAAA==</data>
			<key>## @3 HDMI</key>
			<string></string>
			<key>#framebuffer-con3-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con3-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con3-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con3-pipe</key>
			<data>EgAAAA==</data>
			<key>## patch0</key>
			<string>Enable internal display after sleep for 0x0a2e0008 on 10.10.2-10.12.x (c) syscl</string>
			<key>#framebuffer-patch0-enable</key>
			<integer>1</integer>
			<key>#framebuffer-patch0-find</key>
			<data>AQAAAEAAAAAeAAAABQUJAQ==</data>
			<key>#framebuffer-patch0-replace</key>
			<data>AQAAAEAAAAAPAAAABQUJAQ==</data>
			<key>## patch1</key>
			<string>Enable internal display after sleep for 0x0a2e000a, 0x0a26000a</string>
			<key>#framebuffer-patch1-enable</key>
			<integer>1</integer>
			<key>#framebuffer-patch1-find</key>
			<data>AQAAAEAAAAAeAgAABQUJAQ==</data>
			<key>#framebuffer-patch1-replace</key>
			<data>AQAAAEAAAAAfAgAABQUJAQ==</data>
		</dict>

[elcapitan2016]

@maldon

Hi maldon i get this error

Acpibatterymanager warning fcurrentcapacity > fmaxcapacity . Adjusted fcurrentcapacity from 2600 , to 74

[MaLd0n]

[ref]elcapitan2016[/ref], u need apply a battery patch

[elcapitan2016]

@Maldon

Hi maldon , sorry do I need a ktext for battery patch

and also on the after I apply this to a copy of my original config.plist my display on my laptop is missing I can use only External Monitor HDMI and the video card memory is 1536mb

 

PciRoot(0)/Pci(0x02,0)

AAPL,ig-platform-id

BgAmCg==

device-id

EgQAAA==

#hda-gfx

onboard-1

#AAPL00,override-no-connect

#AAPL00,override-no-edid

framebuffer-patch-enable

1

framebuffer-cursormem

AACQAA==

## @1 HDMI

#framebuffer-con1-enable

1

#framebuffer-con1-type

AAgAAA==

#framebuffer-con1-flags

BgAAAA==

#framebuffer-con1-pipe

EgAAAA==

## @2 HDMI

#framebuffer-con2-enable

1

#framebuffer-con2-type

AAgAAA==

#framebuffer-con2-flags

BgAAAA==

#framebuffer-con2-pipe

EgAAAA==

## @3 HDMI

#framebuffer-con3-enable

1

#framebuffer-con3-type

AAgAAA==

#framebuffer-con3-flags

BgAAAA==

#framebuffer-con3-pipe

EgAAAA==

## patch0

Enable internal display after sleep for 0x0a2e0008 on 10.10.2-10.12.x © syscl

#framebuffer-patch0-enable

1

#framebuffer-patch0-find

AQAAAEAAAAAeAAAABQUJAQ==

#framebuffer-patch0-replace

AQAAAEAAAAAPAAAABQUJAQ==

## patch1

Enable internal display after sleep for 0x0a2e000a, 0x0a26000a

#framebuffer-patch1-enable

1

#framebuffer-patch1-find

AQAAAEAAAAAeAgAABQUJAQ==

#framebuffer-patch1-replace

AQAAAEAAAAAfAgAABQUJAQ==

code]

[MaLd0n]

[ref]elcapitan2016[/ref], u can enable a framebuffer-conx and test

[elcapitan2016]

@maldon

Sorry is this located at device --> arbitrary --> properties

and I will just add framebuffer-conx

[MaLd0n]

[ref]elcapitan2016[/ref], for test just remove # from patches, check with clover configurator Devices/properties

[mattedsnooze]

Added in 47 seconds:

[ref]mattedsnooze[/ref], remove _prw into device xhc and use power button for wake, check if work

 

Delete _prw into xhc - nothing change (((

[BlonduRoo]

Hi MaLd0n ,after sleeping sometimes stops sometimes not, when it stops and goes into sleep I start and does not start, black screen.

Edited May 2, 2019 by Guest

[Osk]

Added in 1 minute 32 seconds:

[ref]Osk[/ref], with my DSDT u have a native, without no, check what cause it, u can use a simple plugin type=1 in config.plist

Already tried all variations in SSDT section of Acpi in config.plist using clover configurator and nothing works, cpu frecuency is almost always at the top. It looks like PM is not working or is partially working. Again, my knowledge is very limited and for now removing your patched file is the only way that PM really works. In both scenarios, with or whitout the patched file it seems that everything is working fine except by the PM. What can be? It is really necesary to use the patched DSDT.aml? I'm asking because I have no idea about what the patch is changing and I'm little afraid of doing something wrong.

Thanks