driftkingn20 Posted April 23, 2019 Share Posted April 23, 2019 please help not working -brightness -keyboard mapping incorrect (ctrl,alt) -thunderbolt -audio(cannot detect in DPCIManager) -hotkey(brightness,volume) My labtop lenovo yoga s730|ideapad 730s - Intel Core i7-8565U (1.80 GHz) - Intel UHD Graphics 620 - 16 GB DDR3L - 512 GB SSD PCIe M.2 - 13.3 inch LED (1920x1080) Full HD IPS Send me Phanupongs-MacBook-Pro.zip Quote Link to comment Share on other sites More sharing options...
Rackers Posted April 23, 2019 Share Posted April 23, 2019 Hello, Thank you for your help so far. Here are my files. Currently struggling to get the following working: Audio Trackpad works but Mac says not detected Kernel panic on boot unless I use intel fake gfx 0x12345678 Thanks Send me Darrens-MacBook-Pro.zip Quote Link to comment Share on other sites More sharing options...
JohnyDJ Posted April 23, 2019 Share Posted April 23, 2019 Hello. I made another hackintosh with HD 4000. Is it possible to patch DSDT and if its possible to check why I have grey dots it I output 4k? I also made framebuffer patching but it as the same if I select correct ig-platform-id (HDMI output no difference and also no sound). Internal sound works OK, also from sleep. Thank you very much. Send me OSX-ITXs-Mini.zip Quote Link to comment Share on other sites More sharing options...
alin86p Posted April 23, 2019 Share Posted April 23, 2019 [ref]alin86p[/ref], ??? there was a link in the msg that referred to a trojan ... it does not matter my antivirus has blocked it ... here is my SendMe https://drive.google.com/drive/folders/1FNU9s2bvWnBMwQx7ez-q99lEUxQhIQsY?usp=sharing Quote Link to comment Share on other sites More sharing options...
R-88 Posted April 23, 2019 Share Posted April 23, 2019 [ref]R-88[/ref], DSDT.aml.zip After reboot extract last send_me with dsdt Thanks for the help Maldon. I am attaching the file you requested to me. I ask you two things, please answer: 1. Is it normal for me to have two USB controllers, PXSX and XHCI ?? 2. it is possible to activate the usb without patches, I would like to activate them manually without using the patches, but using hackintool and enable at the most 15. In this case you have to exclude any patch from the DSDT? I MAKE YOU THIS QUESTION BECAUSE THE FRONT USB (SS01-SS02) EJECT THE USB PEN AUTOMATICALLY 3. Are you sure all those kernel patches are necessary? KERNEL PM??? APPLE RTC?? 4. Are you sure the audio patches are necessary? 5. PLEASE OPEN AND CHECK MY CONFIG 6. Are my CP to PR patches not useful? Many thanx! Send me iMac-Pro-di-Stefano.zip Quote Link to comment Share on other sites More sharing options...
phithiphong Posted April 23, 2019 Share Posted April 23, 2019 thank you MaLd0n Send me Quinnphotographs-Mac-Pro.zip Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted April 23, 2019 Administrators Share Posted April 23, 2019 [ref]driftkingn20[/ref], 1- Replace Full Clover Folder CLOVER.zip 2- Install Clover again with correct options Last Clover Version UEFI 3- Reboot 4- Extract new Send_me Added in 19 minutes 53 seconds: [ref]Rackers[/ref], 1- Replace Full Clover Folder CLOVER.zip 2- Install Clover again with correct options Last Clover Version UEFI 3- Reboot 4- Extract new Send_me Added in 5 minutes 7 seconds: [ref]JohnyDJ[/ref], DSDT.aml.zip VIDEO U NEED CHECK WITH HACKINTOOL Added in 8 minutes 11 seconds: [ref]R-88[/ref], MORE IMPROVEMENTS DSDT.aml.zip 1- common 2- the best is use patches, remove limit and we can use all ports, 15+ 3- don't need if system boot with no problems, but u can use without any problem 4- audio patch just avoid a error log 5- 6- don't need Added in 7 minutes 34 seconds: [ref]phithiphong[/ref], 1- Replace Full Clover Folder CLOVER.zip 2- Install Clover again with correct options Last Clover Version UEFI 3- Reboot 4- Extract new Send_me Added in 4 minutes 54 seconds: [ref]alin86p[/ref], zip files, google driver is bad for zip it CLOVER.zip DSDT.aml.zip CLOVER.zip Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Epsylon Posted April 23, 2019 Share Posted April 23, 2019 (edited) Epsylon, 1- replace full clover folder CLOVER.zip (2.2 MiB) Downloaded 2 times 2- install clover bootloader again with these option 3- reboot Hey mate, sorry, somehow I had booted from an old usb flash drive by accident and sent you wrong info and files the second time around. I have now updated to latest clover and used the 'Arquivo Comprimido.zip' you gave me. With Thunderbolt only the first port works including USB-C (I haven't managed to get the second port to work with anything). Hot plug works on the Thunderbolt! Sleep works for up to a few hours ( if left in sleep overnight it wakes to black screen and kernel panic, something to do with usb?). My WD MyPassport USB3 external hard drive it shows as internal. Another external SSD and a flash drive show as internal and ejectable in disk utility. When I put it to sleep it doesn't eject the external flash drives and hard disks, giving me errors when it wakes up. Geekbench 4 is crashing when trying to run any test (was working before). Could you please have a quick look at my config.plist and also check that my drivers & kexts in Clover are ok? CLOVER.zip Here's the new Sendme files Send me Studio.fritz.box.zip Thank you for the help bro, much appreciated:) Edited April 23, 2019 by Guest Quote Link to comment Share on other sites More sharing options...
alin86p Posted April 23, 2019 Share Posted April 23, 2019 alin86p fichiers zip, le pilote google est mauvais pour le zip https://drive.google.com/drive/folders/17TcA-su2auG7TfuuQDTRFK_kG8vgXotr?usp=sharing Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted April 23, 2019 Administrators Share Posted April 23, 2019 [ref]Epsylon[/ref], TAKE A TESTS remove fakesmc sensors, try without ssdt tbh too test k.p in sleep, disable wake from lan in bios/uefi and system preferences/energy too Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
devmanus1 Posted April 23, 2019 Share Posted April 23, 2019 yep i can adjust brightness after loading dsdt i think we have to generate our own ssdt and inject it correct me if I am wrong If you are able to activate brightness by using AppleBacklight kext as suggested by Maldon, you are more likely able to customise your brightness level by means of ssdt (unlike WEG where brightness customisation option is not available afaik) Quote Link to comment Share on other sites More sharing options...
Rackers Posted April 23, 2019 Share Posted April 23, 2019 (edited) Added in 19 minutes 53 seconds: Rackers, 1- Replace Full Clover Folder CLOVER.zip (2.42 MiB) Not downloaded yet 2- Install Clover again with correct options Last Clover Version UEFI Image 3- Reboot 4- Extract new Send_me Thank you again for your continued help. I followed your instructions but I am now getting a kernel panic during boot. Here is the image: If I use intel fake gfx I do not get a panic but when OS loads trackpad no longer works. Edited April 23, 2019 by Guest Quote Link to comment Share on other sites More sharing options...
devmanus1 Posted April 23, 2019 Share Posted April 23, 2019 [ref]racahama[/ref], DSDT.aml.zip what trackpad u have? https://osxlatitude.com/forums/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/ Added in 41 seconds: [ref]devmanus1[/ref], i know, bro is common is 8th mobile with weg.kext patches Added in 9 minutes 36 seconds: [ref]trance4[/ref], DSDT.aml.zip use it too change EC0 to EC 4543305f 45435f5f change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 -Audio https://Olarila.com/forum/viewtopic.php?f=28&t=9788 Added in 6 minutes 51 seconds: [ref]erickmabanto[/ref], DSDT.aml.zip use last version https://github.com/acpica/acpica what should we do for that? Quote Link to comment Share on other sites More sharing options...
Cartmanmg Posted April 23, 2019 Share Posted April 23, 2019 [ref]Cartmanmg[/ref], DSDT.aml.zip use Olarila Clover folder for ur Chipset Added in 6 minutes 57 seconds: [ref]martinszathmari[/ref], CLOVER.zip extract original tables with f4 key in clover boot screen, extract new send_me Added in 5 minutes 44 seconds: [ref]Makaronia[/ref], u disable usb 3 in bios? DSDT.aml.zip Hi MaLd0n, finally gc-titanridge has arrived but i cannot get it to work... should i update dsdt? thanks Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted April 24, 2019 Administrators Share Posted April 24, 2019 [ref]alin86p[/ref], DSDT.aml.zip change EHC1 to EH01 45484331 45483031 change EHC2 to EH02 45484332 45483032 change GFX0 to IGPU 47465830 49475055 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 Added in 1 minute 59 seconds: [ref]Rackers[/ref], follow here https://Olarila.com/forum/viewtopic.php?f=62&t=9275 use ig-plartform-id 0x191b0000 Added in 1 minute 11 seconds: [ref]devmanus1[/ref], check if u see way about it in google, need test Added in 26 seconds: [ref]Cartmanmg[/ref], extract new send_me Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
punjasin Posted April 24, 2019 Share Posted April 24, 2019 thank you in advanced Send me simyas-Mac-Pro.zip Quote Link to comment Share on other sites More sharing options...
alin86p Posted April 24, 2019 Share Posted April 24, 2019 [ref]alin86p[/ref], DSDT.aml.zip change EHC1 to EH01 45484331 45483031 change EHC2 to EH02 45484332 45483032 change GFX0 to IGPU 47465830 49475055 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 Merci je vais tester Quote Link to comment Share on other sites More sharing options...
erickmabanto Posted April 24, 2019 Share Posted April 24, 2019 Thanks, Mald0n, I have a question about DSDT editing... Errors= Need to be 0 Warning= Less as possible Remarks= I guess needs to be less as possible too? Optimization= This is my question... Does this need to be lower or higher? or keep it less like a warning? Quote Link to comment Share on other sites More sharing options...
Cartmanmg Posted April 24, 2019 Share Posted April 24, 2019 Added in 26 seconds: [ref]Cartmanmg[/ref], extract new send_me Hello MaLd0n, here it is. Miro’s iMac.ioreg.zip Quote Link to comment Share on other sites More sharing options...
gonzalezpereza Posted April 24, 2019 Share Posted April 24, 2019 I just installed the Olarila Mojave 10.14.4. Here is my send me, thanks in advance. Send me.zip Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted April 24, 2019 Administrators Share Posted April 24, 2019 [ref]punjasin[/ref], DSDT.aml.zip i think ur processor don't need voodootscsync Added in 47 seconds: [ref]erickmabanto[/ref], just need patches and fix errors for compile Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
wingsteels Posted April 24, 2019 Share Posted April 24, 2019 Hi MaLd0n, thanks again for getting my DSDT patched. I am still having issues with sleep, sometimes it works great, sometimes the hack just shut down... Thanks Send me desktop-05ektat.home.zip Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted April 24, 2019 Administrators Share Posted April 24, 2019 [ref]Cartmanmg[/ref], looks good, have problems in hack? Added in 4 minutes 38 seconds: [ref]gonzalezpereza[/ref], DSDT.aml.zip Added in 8 minutes 15 seconds: [ref]wingsteels[/ref], CLOVER.zip need test Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
wingsteels Posted April 24, 2019 Share Posted April 24, 2019 Thanks ! I just tested it and it seemed to work... what is the problem ? (I saw you unchecked PluginType, has it something to do with it ?) Quote Link to comment Share on other sites More sharing options...
Cartmanmg Posted April 24, 2019 Share Posted April 24, 2019 [ref]Cartmanmg[/ref], looks good, have problems in hack? Hi, sorry i just realized runme.app didnt complete as it should and send you a whole zip. Im sending the full send me zip file. Its not detecting gigabyte gc-titanridge in mac os (PCI) and under thunderbolt says "No driver loaded". Id like to connect my thunderbolt display and nothing happens. i read it should work out of the box but no lock atm... Send me Miros-iMac.zip Quote Link to comment Share on other sites More sharing options...