Hackintosh Guide - Sierra / HighSierra / Mojave / Catalina / BigSur / Monterey on Serie 5, 6, 7, 8, 9 with Clover Bootloader / DSDT

[MaLd0n]

[ref]tsader[/ref], no idea

[tsader]

Hey Mald0n

I thought I'll try creating a new dsdt but whenever I run RunMe app I get the following error at some point

IOREG dump failed. Retrying

Increased delay x2 for IOREG dump. This will take a while...(33 sec)

Thx

Added in 6 minutes 25 seconds:

Sorry, I spoke too soon and figured it out.

Here are the files

Thank you!

Send me Bonnys-iMac-Pro.zip

[MaLd0n]

[ref]tsader[/ref], first, check Olarila clover folder for chipset x99, have a correct renames there. dont use xosi, xdsm

[pepe21]

MaLd0n, thank you for the useful links, I'm kinda new on this topics and I didn't knew there was something like that. Now I'm starting to understand a little bit.

I'm testing on more systems to learn how it works and check if it's possible run Mojave nice and smooth.

Now I installed on a system with an i7 4770, motherboard GA-H87M-D3H and GTX 650, so I'm not sure about which CLOVER folder I should use, because is 4 gen, and series on the useful links start on 5.

Any advices?

EDIT: I guess I should use this one:

CHIPSET SERIES 5, 6, 7, 8, 9 (NEHALEM / SANDY BRIDGE / IVY BRIDGE / HASWELL / BROADWELL)

Am I right?

EDIT 2:

I used it and the system boots normally.

Now I have the problem with the HDMI audio, which is not working. I guess that could be because I don't have the DSDT.aml?

RunMe file:

https://www.mediafire.com/file/9dizf3aduqkt14k/Send_me_iMac-de-Vicente.zip/file

Thank you so much for your help!

[MaLd0n]

[ref]pepe21[/ref], DSDT.aml.zip

[pepe21]

MaLd0n,thank you for the DSDT.aml.

I'm having a problem with sleep, when computer sleeps, USB devices (USB 3.0 and card reader included) stop working, and I can't wake the system up again, only pressing power button for 4 seconds so the computer turns off and then turning on the system again.

I did some research and I deleted the com.apple.PowerManagement files on ~/Library/Preferences, but still not working.

I also have turned on the power on with keyboard (any key) and move mouse option from BIOS.

Any clues about where can be the problem?

Thanks!

[MaLd0n]

[ref]pepe21[/ref], extract new send_me

[pepe21]

pepe21

MaLd0n, I have 2 systems with the same problem and different CLOVER folder (different chipset), here are the RunMe files of both:

i7 4770: https://ufile.io/wcsk2rlb

i5 6500: https://www.mediafire.com/file/vmkjdhk9qo2mqa2/Send_me_iMac-de-Vicente.zip/file

Thanks!

[MaLd0n]

[ref]pepe21[/ref], for ur haswell check here

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

ur configs looks very good, try update clover

Clover_v2.4k_r4928.pkg.zip

[uran0s]

MaLd0n,

Actualizei para o mojave para 10.14.5, e fiquei sem HEVC. Ao ler um pouco sobre o assunto, reparei que vários usuários estão a ter o mesmo problema com VEGA.

Mudei a SMBIOS para iMac Pro 1,1 e ficou a dar. Aparentemente está tudo ok, excepto no PCI LIST, aparece que o driver não está instalado para IMEI CONTROLLER.

É importante? Do que poderá ser? Já tentei correr o runme, mas não passa do IOREG.

Abraço

Screenshot 2019-05-14 at 20.02.00.zip

[MaLd0n]

[ref]uran0s[/ref], IMEI load somente se vc ativar a IntelHD, o que é sempre o correto pro intelquicksync funcionar

[MMido]

Hello MaLd0n,

I read your guide about Opencore bootloader I get really excited.

I thought maybe you will help in setup my first EFI folder with OC new directory structure and config file because it's a bit hard

I have several kernel patches.

so maybe the new bootloader will fix my sleep problems?

This my latest working EFI in Mojave 10.14.5

Send me Idriss-iMac-Pro.lan.zip

[MaLd0n]

[ref]MMido[/ref], very new project, need wait some months

[Luizcm3]

SBUS

-FIX ERRORS AND WARNINGS

-HPET

-SATA

-DMAC

-SLPB

-DARWIN

-EHCI

-XHCI

-PLUGIN TYPE

-XXXX to HDEF

-HDEF

-RTC

-IRQs

-SBUS

-MIKEY

-BUS1

-MCHC

-ALS0

-SHUTDOWN

-LAN

-USBX

-IMEI

-EC

-PNLF

-GFX0

-HDAU

-NVME

-ARPT

-INTELHDGRAPHICS

[MaLd0n]

[ref]Luizcm3[/ref], ?

[oloye]

good day

pls am new here can someone help me how to install this

am using hp 250 g3 intel pentium n3540 quadcore cpu

motherboard name Hp 2213

motherboard id DMI

ram 4gb

gpu intel bay trail SoC

wifi ralink rt3290 adapter

[MaLd0n]

[ref]oloye[/ref], i think ur hardware don't have a full support in MacOS

[uran0s]

uran0s, IMEI load somente se vc ativar a IntelHD, o que é sempre o correto pro intelquicksync funcionar

Obrigado!

[pepe21]

[ref]MaLd0n[/ref], I have my Asus UX410UA Hackintosh you help me long ago, and I updated to 14.4.5 and I can't get touchpad working again

System Preferences app shows like no Trackpad is detected.

Here's the RunMe file.

https://ufile.io/j2opy5oi

Everything else like sound, FnKeys and all works without a problem except I can't update or download apps from AppStore (I've generated new serial number and SmUUID and I can log in, but can't download or update apps).

Any ideas?

Thanks for the help and support!

[MaLd0n]

[ref]pepe21[/ref], run repair permission

generate new smbios, serials

[pepe21]

[ref]MaLd0n[/ref], that fixed my problem, thank you!

Could you help me and explain what repair permission does? Because I don't understand completely.

Maybe any place to read and understand about this?

Thank you again!

[MaLd0n]

[ref]pepe21[/ref], rebuild cache, repair permission, the best is after updates run it

[klausbartu]

I want to say thanks to Mald0n, and the vanilla method given by Olarila, it worked like a charm in my H97M-D3H with a GTX 1060 !

[pepe21]

[ref]MaLd0n[/ref], the problem I find when I repair permissions is that, once I repair them and get my touchpad to work, App Store stop downloading and updating apps, showing an error message (I attach image for you to see).

Why is this happening? I tried using the iMessageFix script that erases some folders and the console return says folder not found.

[MaLd0n]

[ref]pepe21[/ref], generate new full smbios