Install MacOS with Vanilla Olarila Image, Step by Step

[MaLd0n]

[ref]adivajra[/ref], add this flag in boot args

uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS07;HS08;HS09;HS10;HS11;HS12;HS13;HS14

[adivajra]

<3 <3 <3

Added in 29 minutes 53 seconds:

https://drive.google.com/file/d/1CCojjBCziPrEnIK63BSyPUMLGnA5jXoN/view?usp=sharing

I'm stuck here because no keyboard or mouse...

Should I just try like this to allow another USB port

uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS07;HS08;HS09;HS10;HS11;HS12

[MaLd0n]

[ref]adivajra[/ref], ofc, mapped ports

[adivajra]

I tried another installation, it seems to be stuck at less than 1 minute again, I'm still waiting but I can't move the mouse screen is frozen. I will wait 20 minutes more....

Should I change something in argument to avoid this?

(I'm using display port)

[adivajra]

it looks like similar board has this problem

it seems to be related to 'AptioMemoryFix-64.efi' causing problems, it needs to be to be replaced by OsxAptioFix2Drv-64.efi... only problem is that I have NO idea where's I can find it within the usb

Added in 35 minutes 21 seconds:

so I found a GitHub with OsxAptioFix2Drv-64.efi, I mounted the USB with Olarila image and use clover configurator to mount the USB's efi, I found the 'AptioMemoryFix-64.efi' erase it and put the newly found 'OsxAptioFix2Drv-64.efi' in the the folder, now I'm trying a new install ^^ I could move the mouse until the installation says less than 1 minute then it stopped, I guess the install has stopped again

I succeeded the installation after enable virtualization that I had disabled thinking it was vt-d, now I have a problem with my display, I'm using display port on a 4K monitor, It looks like there not enough vRAM windows can't close and are difficult to open

http://OsxAptioFix2Drv-64.efi

I will try to install clover, I hope it will fix the problem

[Michael]

 

Hello, I get a Screen after booting with config2: macOS could not be installed on your computer. This version 10.14.3 cannot be installed on this computer. Quit the installer to restart your computer and try again. Restart.

Please help.

HP ProBook 5430s:

CPU: Intel® Core i3-2310M CPU @ 2.1GHz, Sandy Bridge

Graphics:

- ATI Radeon HD 7400M Series

- Intel HD Graphics 3000

Screen: 1366x768

Trackpad: Synaptics PS/2 Port TouchPad

I did try other methods before, with unishit, multishit and Clover and I was able to install Mojave, but with 1024x768 screen resolution, and with sound, but no keyboard and no mouse, only via external USB. Internet via Network was working.

Edited March 2, 2019 by Guest

[erroruser]

[ref]adivajra[/ref], read here https://www.Olarila.com/forum/viewtopic.php?t=7370&start=140

[adivajra]

I can enter the OS but I can't do nothing in there look https://drive.google.com/open?id=11fAl1bs-XXaxX-7UAC5N2I5Bw2tRSHVu

[MaLd0n]

[ref]adivajra[/ref], up dvmt in bios/uefi, use 128+

[adivajra]

ok I will give it a try, wait

Added in 21 minutes 38 seconds:

I can't see my USB drive, it does not appear even when I plug it on the USB port of my working keyboard, I need the tools inside, and I can't find or mount /volume/efi

[erroruser]

[ref]adivajra[/ref], remove your args in boot screen an reset

[adivajra]

thanks erroruser and thanks also Mald0n for your help.

I put video memory on bios to 1024 but still I have problems with video glitch a bit less only.

The USB drive was not showing because I had forgot to had the arguments(HS01 etc) before to boot from the key my mouse and keyboard were working though?! Now I boot from the USB and it shows on macos.

I have already installed clover but if I boot without pressing any key then it goes on clover installed on the hard drive but there is no choice to boot from SSD nothing appears so I need to use the USB drive to get myself into macos.

I guess it is because I did not install yet the clover folder from Olarila but I don't know how to go into /volume/efi

oh and I can't run the runme.app well I can but when it comes to save the file, the screen is blinking so much that I can't even save it and then I have to reboot

Added in 24 minutes 54 seconds:

it seems I succeeded for the runme https://drive.google.com/open?id=1npnBUiL5b0UMTt_A0P67t5xxLElHCWTo

[erroruser]

[ref]adivajra[/ref], use your usb to boot up then in the files folder is the clover config then you should be able to boot an use this clover folder an set your smbios to imac 18,3 or you can add that in at the boot screen options https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

[adivajra]

ok thank you erroruser, I changed the clover folder and things are easier now

https://drive.google.com/open?id=1npnBUiL5b0UMTt_A0P67t5xxLElHCWTo

For USB limit, in my clover version unlike in your video, I can't add custom flag in boot arguments, there is a contextual menu and I can only choose from right click menu

[adivajra]

I wonder if I purchase an rx 580, it will make things easier?

Video is still a problem for now, using hackintool I made macOS show the correct GPU but the patch affected the video display like before the install of the Olarila clover folder...

[MaLd0n]

[ref]adivajra[/ref], go to rx 590 saphire

[adivajra]

why? it is easier?

I already own an rtx 2080 in my PC (for virtualisation and gaming), so I spent money enough in video cards ^^ if rx 590 is not required I would prefer a cheaper one. For info my PC is AMD ryzen so it is not macos compatible

[MaLd0n]

[ref]adivajra[/ref], is native

[jipparas]

Hello, I downloaded Mojave’s raw file and after burn it with tansmac. I use UEFI bios. When I boot from usb: boot0af error and I can’t boot. Any idea ?

[erroruser]

[ref]adivajra[/ref], you can hit "+" symbol then double click to write in the boot args

best is with mojave to use amd 470,480, 560,580,sapphire 590, no xfx models as nvidia has no web driver support on in high sierra

Added in 30 seconds:

[ref]jipparas[/ref], dont use transmac use win32diskimager

[jipparas]

I also used win32disk image. I should I unzip it first? I tried different programs and t says not valid or not zip file

[erroruser]

yes unzip an then restore to usb then when you want to boot the usb use bios boot manager an select uefi usb

[jipparas]

[ref]erroruser[/ref], I can’t unzip it. 7zip says it’s not a zip file. I downloaded Olarila mojave 10.14.3.raw.bz2 6.23gb.

[erroruser]

native unzip should work or use winrar or winzip

[Michael]

Can anyone help or give me a hint?

- - -

I get a Screen after booting with config2: macOS could not be installed on your computer. This version 10.14.3 cannot be installed on this computer. Quit the installer to restart your computer and try again. Restart.

Please help.

HP ProBook 5430s:

CPU: Intel® Core i3-2310M CPU @ 2.1GHz, Sandy Bridge

Graphics:

- ATI Radeon HD 7400M Series

- Intel HD Graphics 3000

Screen: 1366x768

Trackpad: Synaptics PS/2 Port TouchPad

I did try other methods before, with unishit, multishit and Clover and I was able to install Mojave, but with 1024x768 screen resolution, and with sound, but no keyboard and no mouse, only via external USB. Internet via Network was working.

- - -