Install MacOS with Vanilla Olarila Image, Step by Step

[kansukee]

Sorry MaLd0n, where do I rename them?

[MaLd0n]

[ref]kansukee[/ref], clover configurator have it, acpi tab

[kansukee]

MaLd0n I don’t have access to a Mac 🙁

Added in 3 minutes 28 seconds:

I can edit the config.plist inside the clover folder using notepad++ though. I just need to know what changes I need to make.

[MaLd0n]

[ref]kansukee[/ref], my clover folders have it

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[kansukee]

MaLd0n I was able to make the changes to the config.plist file and got past the screen but now I got this:

https://ibb.co/ZBm8hP8

I guess I should try with an older OS version or is there a change I can make to trick the installer?

[cm0270]

says runme app file too big to attach to message. It is 6.3mb

hope this is ok with you

 

https://www.mediafire.com/file/qrscjbi885ge53d/Send_me_Brads-MacBook-Air.zip/file

[MaLd0n]

[ref]kansukee[/ref], u can try with -x for disable some drivers

Added in 7 minutes :

[ref]cm0270[/ref], DSDT.aml.zip

try without usbinjctall

[cm0270]

Thanks,

Looks like the edited DSDT did the trick for the USB issue. Now I just need to find out which audio codec this thing uses and see if I can get the audio up and running as well as the Bluetooth for the wifi card I purchased. Wifi works good but don't see anything on the settings for Bluetooth.

Plugged USB drives into each port separately and all at one time and works great.

 

USB 2.0 Bus:

 Host Controller Driver:	AppleUSBEHCIPCI
 PCI Device ID:	0x8c2d 
 PCI Revision ID:	0x0005 
 PCI Vendor ID:	0x8086 

Hub:

 Product ID:	0x8008
 Vendor ID:	0x8087  (Intel Corporation)
 Version:	0.05
 Speed:	Up to 480 Mb/sec
 Location ID:	0x1a100000 / 1
 Current Available (mA):	500
 Current Required (mA):	0
 Extra Operating Current (mA):	0

BCM20702A0:

 Product ID:	0x21fb
 Vendor ID:	0x0a5c  (Broadcom Corp.)
 Version:	1.12
 Serial Number:	28C2DDDE3DCE
 Speed:	Up to 12 Mb/sec
 Manufacturer:	Broadcom Corp
 Location ID:	0x1a130000 / 2
 Current Available (mA):	500
 Current Required (mA):	0
 Extra Operating Current (mA):	0

USB DISK 2.0:

 Product ID:	0x4200
 Vendor ID:	0x13fe  (Phison Electronics Corp.)
 Version:	1.00
 Serial Number:	90006B3B2D279398
 Speed:	Up to 480 Mb/sec
 Manufacturer:	        
 Location ID:	0x1a120000 / 4
 Current Available (mA):	500
 Current Required (mA):	200
 Extra Operating Current (mA):	0
 Media:
USB DISK 2.0:
 Capacity:	7.75 GB (7,746,879,488 bytes)
 Removable Media:	Yes
 BSD Name:	disk4
 Logical Unit:	0
 Partition Map Type:	GPT (GUID Partition Table)
 USB Interface:	0
 Volumes:
CCCOMA_X64F:
 Capacity:	7.75 GB (7,745,814,016 bytes)
 Available:	2.78 GB (2,778,984,448 bytes)
 Writable:	Yes
 File System:	MS-DOS FAT32
 BSD Name:	disk4s1
 Mount Point:	/Volumes/CCCOMA_X64F
 Content:	Microsoft Basic Data
 Volume UUID:	7C6F9E22-5A22-3A4D-B610-DFCC8024FE2C

USB Receiver:

 Product ID:	0xc52b
 Vendor ID:	0x046d  (Logitech Inc.)
 Version:	12.03
 Speed:	Up to 12 Mb/sec
 Manufacturer:	Logitech
 Location ID:	0x1a110000 / 3
 Current Available (mA):	500
 Current Required (mA):	98
 Extra Operating Current (mA):	0

[MaLd0n]

[ref]cm0270[/ref], BROADCOM?

[cm0270]

cm0270, BROADCOM?

 

Yes

AzureWave AW-CE123H Broadcom BCM94352HMB with Bluetooth 4.0 and Wifi 802.11ac

[MaLd0n]

[ref]cm0270[/ref], https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads/

[kansukee]

MaLd0n, can you look at my clover folder attached? I even tried installing with only one drive attached as suggested on a different site but got the same result...

CLOVER.rar

[MaLd0n]

[ref]kansukee[/ref], EFI.zip

[cm0270]

Awesome. Bluetooth and iMessages working fine. I tried using multishit to try to get the ALC892 audio codec working but no luck.

Not sure what kind this laptop has, been trying to find out with no luck, on webcam. That would be awesome to get FaceTime working. all I can see in system settings for video capture is "no video capture devices were found".

Added in 17 minutes 23 seconds:

Audio now working using AppleALC.kext v1.3.9 and Lilu.kext v 1.3.7 and using KextBeast to inject them into Library/Extensions and setting the layout to 12 in Clover Configurator and restarting after

[MaLd0n]

[ref]cm0270[/ref], never use it

check here

https://Olarila.com/forum/viewtopic.php?f=28&t=9788

[cm0270]

Would it be possible to get the DSDT edited to make sure the GeForce GTX 950M is not activated or anything or am I good to go without it?

This is all I see in the system settings. Noting about the PCI-E Dedicated GeForce GTX 950M.

It seems like I do get some screen flickering now and then and not sure if that is the problem or not.

 

Intel HD Graphics 4600:

 Chipset Model:	Intel HD Graphics 4600
 Type:	GPU
 Bus:	Built-In
 VRAM (Dynamic, Max):	2048 MB
 Vendor:	Intel
 Device ID:	0x0412
 Revision ID:	0x0006
 Metal:	Supported, feature set macOS GPUFamily1 v4
 Displays:
Display:
 Resolution:	1920 x 1080 (1080p FHD - Full High Definition)
 UI Looks like:	1920 x 1080
 Framebuffer Depth:	24-Bit Color (ARGB8888)
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Rotation:	Supported
 Automatically Adjust Brightness:	No
 Connection Type:	DisplayPort

DSDT.aml.zip

[MaLd0n]

[ref]cm0270[/ref], is a optimus? if yes, don't work, u need disable nvidia via dsdt or other way and use only intelHD

[cm0270]

is it possible to get the dsdt edited to disable the Geforce? It is Optimus. There is no way or settings in the bios to disable it unfortunately.

other than the dsdt edit to disable the Geforce dedicated card and the webcam this things seems to be fully functional.

Webcam would be awesome but I have no way of figuring out how to do it. No idea what brand, etc or if there is any settings in the dsdt that shows it or not or any way to enable it to work.

SD Card Reader not working at this time either.

well maybe other than power management would be the last thing I guess.

could this possibly be the webcam? I would assume but then again I don't know diddly squat about dsdt files

 

[/   Device (CAM0)

{

Method (_ADR, 0, Serialized) // _ADR: Address

{

Return (^^_ADR)

}

 

Name (_PLD, Package (0x01) // _PLD: Physical Location of Device

{

Buffer (0x14)

{

/* 0000 */ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

/* 0008 */ 0x25, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

/* 0010 */ 0x8C, 0x00, 0x2C, 0x01

}

})

}

}de]

DSDT.aml.zip

Edited August 1, 2019 by Guest

[cm0270]

Found a Logitech 2megapixel webcam that is quite a few years old sitting in my closet. It was plug and play and works with FaceTime. Weird thing is when I record video I get these distortions on the screen as seen in the short video attached. Not sure if that is because the dedicated GeForce GPU isn't disabled in DSDT or not.

 

https://www.mediafire.com/file/rwuoim0nei295c0/Movie_on_7-31-19_at_11.04_PM.mov.zip/file

[vishnu prabhakar]

HAI!

AFTER SUCCESSFUL INSALATION OF MAC OS HIGHSERRIA I UNABLE TO ACTIVATE SOUND AND GRAPHIC

HP ELITEDESK 800SF ,AUDIO HD4600pROCESSER I74470 RAB 8GB

[MaLd0n]

[ref]vishnu prabhakar[/ref], check useful links in my signature

[jasnd89]

Followed your guide but the installer stuck at AppleKeyStore::start: _sep_enabled = 0

Any hints? I'm on sandy bridge Desktop with p8p67 motherboard.

[MaLd0n]

[ref]jasnd89[/ref], post one photo

[jasnd89]

jasnd89, post one photo

I tried Mojave and now High Sierra. Results are the same.

[MaLd0n]

[ref]jasnd89[/ref], whar ur full hardware specs? processor, gpu, etc