Hackintosh Guide - Sierra / HighSierra / Mojave / Catalina / BigSur / Monterey on Serie 5, 6, 7, 8, 9 with Clover Bootloader / DSDT

[liemhatang]

My System

CPU: i3-2100

Main: Asus H61

VGA: Quado K620

what hardware?

my hardware. i use ssd samsung evo 850

[MaLd0n]

use it

and check if appears log after new crash

[liemhatang]

My clover.

don't every change. just install nVidia Driver

CLOVER Post Install (1).zip

[MaLd0n]

My clover.

don't every change. just install nVidia Driver

run our app

RunMe.app

app generate all logs

[liemhatang]

run our app

RunMe.app

app generate all logs

 

I can not run it because when I boot into the main screen, about 10 to 15 seconds is my computer has been standing, CPU is not working, mouse, keyboard ....

[sagerian]

Audio and sleep problem here.

Using macOS High Sierra 10.13.1, with model identifier iMac12,2.

I managed to install video, LAN, audio with AppleALC.kext, PS2 and USB drivers and besides sleep, everything worked fine. Then, I left my computer unattended and it went to sleep. Funny, since if I try to put it to sleep with mac menu - Sleep, it doesn't shut down, only the monitor goes to sleep. When I tried to wake it up, it kept coming out of sleep and going back. Even the reset switch was useless. I had to shut it down completely and start it up again to properly boot. Since then, audio is dead, even if I redownloaded and replaced Lilu.kext 1.2.3. AppleALC.kext and VoodooHDA.kext are both useless. In Windows and Linux, audio works fine, as before.

All my kexts are in EFI partition, in /EFI/CLOVER/kexts/Other.

I have no idea how to fix sound or sleep problems.

Update:

Sound is working now. After more reading about kexts, I downgraded Lilu.kext from version 1.2.3 to 1.0.0 in EFI partition, /EFI/CLOVER/kexts/Other. Though I don't understand this, because it worked fine with version 1.2.3 for a day or so.

Send me admins-iMac.zip

[MaLd0n]

Audio and sleep problem here.

Using macOS High Sierra 10.13.1, with model identifier iMac12,2.

I managed to install video, LAN, audio with AppleALC.kext, PS2 and USB drivers and besides sleep, everything worked fine. Then, I left my computer unattended and it went to sleep. Funny, since if I try to put it to sleep with mac menu - Sleep, it doesn't shut down, only the monitor goes to sleep. When I tried to wake it up, it kept coming out of sleep and going back. Even the reset switch was useless. I had to shut it down completely and start it up again to properly boot. Since then, audio is dead, even if I redownloaded and replaced Lilu.kext 1.2.3. AppleALC.kext and VoodooHDA.kext are both useless. In Windows and Linux, audio works fine, as before.

All my kexts are in EFI partition, in /EFI/CLOVER/kexts/Other.

I have no idea how to fix sound or sleep problems.

Update:

Sound is working now. After more reading about kexts, I downgraded Lilu.kext from version 1.2.3 to 1.0.0 in EFI partition, /EFI/CLOVER/kexts/Other. Though I don't understand this, because it worked fine with version 1.2.3 for a day or so.

CLOVER.zip

[sagerian]

MaLd0n,

should I replace my Clover folder with the one provided by you in the archive?

Will this config work if I upgrade to a newer version, like 10.13.5?

[MaLd0n]

MaLd0n,

should I replace my Clover folder with the one provided by you in the archive?

Will this config work if I upgrade to a newer version, like 10.13.5?

yes

take a shot

[sagerian]

I just tried your Clover folder.

Audio: works.

LAN: does not work.

Sleep: works

Wake up from sleep: is horribly wrong.

I have noticed IntelGraphicsFixup.kext in there. I don't have an Intel graphics card. Does it have any other meaning?

[MaLd0n]

I just tried your Clover folder.

Audio: works.

LAN: does not work.

Sleep: works

Wake up from sleep: is horribly wrong.

I have noticed IntelGraphicsFixup.kext in there. I don't have an Intel graphics card. Does it have any other meaning?

MB: Asus P8P67 rev3.1

CPU: Intel i7 2600k (8M Cache, up to 3.80 GHz)

RAM: 16 GB DDR3 Corsair

VIDEO: NVIDIA GTX 1080 8GB GDDR5X 256bit memory

HDD 250GB (macOS 10.13.1), GPT, Clover

run .app again and post new files

[sagerian]

These are the files generated by RunMe, with the CLOVER folder exactly as you uploaded it.

The only modification I did to the system was to install Nvidia Web Driver. But it does not load, macOS still uses OSX Default Graphics Driver.

Send me admins-iMac.zip

[MaLd0n]

These are the files generated by RunMe, with the CLOVER folder exactly as you uploaded it.

The only modification I did to the system was to install Nvidia Web Driver. But it does not load, macOS still uses OSX Default Graphics Driver.

Attachments

Send me admins-iMac.zip

with my files

[sagerian]

Yes, with your CLOVER folder. I copied it in EFI partition, then I installed Nvidia Web Driver.

[MaLd0n]

http://Olarila.com/forum/download/file.php?id=9734

[sagerian]

With this new CLOVER folder, macOS doesn't boot anymore. I managed to take a picture of the screen with my phone:

https://ibb.co/hAHLU8

[MaLd0n]

uncheck drop OEM

[sagerian]

I unckecked "Drom OEM" in Clover Configurator, exported the configuration and it's getting better:

Audio: works

LAN: works

PS2 keyboard: does not work. But strangely enough, pressing a key while computer is sleeping, wakes it up

Sleep: works, the video card, the fans, the PSU, all seem to stop

Wake up from sleep: does not work. The video card does not wake up the monitor, a red LED is blinking on the motherboard. When the computer is running normally, that LED is off.

Send me admins-iMac.zip

[MaLd0n]

I unckecked "Drom OEM" in Clover Configurator, exported the configuration and it's getting better:

Audio: works

LAN: works

PS2 keyboard: does not work. But strangely enough, pressing a key while computer is sleeping, wakes it up

Sleep: works, the video card, the fans, the PSU, all seem to stop

Wake up from sleep: does not work. The video card does not wake up the monitor, a red LED is blinking on the motherboard. When the computer is running normally, that LED is off.

if don't work, live with it

CLOVER.zip

u have a good system, just sleep don't work, it's common in many mobos series 6, x79 too

[Aidzi]

Hi, I wrote already on FB .. Can anyone help config.plist change my hw - in the description? I have to start the video card and audio .. the file i attached .. i tried the above changes and settings but without success .. thanks for your help.

The config.plist file will be sent to PM.

Mainboard: GA-B150M-DS3H DDR3

PROCESSOR: Intel i5-6500 3.19GHz

Graphics: INTEL HD 530

config.plist.zip

[sagerian]

MaLd0n,

I'll leave it like it is now. Thank you for your help.

[MaLd0n]

Hi, I wrote already on FB .. Can anyone help config.plist change my hw - in the description? I have to start the video card and audio .. the file i attached .. i tried the above changes and settings but without success .. thanks for your help.

The config.plist file will be sent to PM.

Mainboard: GA-B150M-DS3H DDR3

PROCESSOR: Intel i5-6500 3.19GHz

Graphics: INTEL HD 530

i need a full dump

[MaLd0n]

MaLd0n,

I'll leave it like it is now. Thank you for your help.

MB: Asus P8P67 rev3.1

CPU: Intel i7 2600k (8M Cache, up to 3.80 GHz)

RAM: 16 GB DDR3 Corsair

VIDEO: NVIDIA GTX 1080 8GB GDDR5X 256bit memory

HDD 250GB (macOS 10.13.1), GPT, Clover

k

enjoy

[Aidzi]

MaLd0n - Can you tell me what exactly am I going to do, please?

[MaLd0n]

MaLd0n - Can you tell me what exactly am I going to do, please?

send me ur clover folder, DSDT and one ioreg