Alexandros Tselikas Posted January 8 Share Posted January 8 (edited) Hello there, I followed your guide and tried to install Ventura on my desktop. I had some problems with the first installation step stopping in the middle, rebooted and threw a Stop Sign error, cleared NVRAM two times and was able to reboot into the installer, continued to install and then restarted again with the same problem. I was finally able to install it and it sort of works ok. I cloned the EFI folder from the installation drive to the hard drive but I have trouble booting it up. I have to clear NVRAM a lot of times to get it to boot plus I get two options in the boot options, OpenCore EFI and UEFI OS. They seem to work the same but sometimes it fails with OC: Failed to open root FS - Device Error! Clearing NVRAM usually fixes that too. I have disabled all the options in the BIOS that I saw needed to be disabled. People in the internet say it's a kernel panic, how can I see the root cause of it? My Desktop is: i5-13600kf Gigabyte Z790 Gaming X AX rev 1.0 RX 6800 XT 32GB DDR5 BeQuiet Power 10 750W Edited January 8 by Alexandros Tselikas Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 8 Administrators Share Posted January 8 What NVME? Follow instructions, is not common error with EFI Olarila https://www.olarila.com/topic/20908-easy-fast-and-perfect-vanilla-hackintosh/  Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @danielnmaldonado@gmail.com Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Alexandros Tselikas Posted January 8 Author Share Posted January 8 It's a Kingston A2000  1TB M.2 NMVE drive. I've done all the steps except for requesting a DSDT patch and USB port mapping. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 8 Administrators Share Posted January 8 U need check this ssd. Many kingston is not good under macOS. Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @danielnmaldonado@gmail.com Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Alexandros Tselikas Posted January 8 Author Share Posted January 8 I actually installed it in a SanDisk SSD Ultra 3D 500GB which is plain SATA. My Windows installation is on the NVME drive. Does that make any difference? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 9 Administrators Share Posted January 9 Need disable this nvme under macos to check if this problem is that. Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @danielnmaldonado@gmail.com Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Alexandros Tselikas Posted January 9 Author Share Posted January 9 I removed it from the motherboard completely. The problem still remains. Â I tried installing again, same exact issue need to reset nvram twice in each step for it to boot. Here's an error I got after the installer rebooted. 20240109_103151.zip Okay, after a few NVRAM resets it seems to be booting up with the first try, but this is with the NVME unplugged, how can I make it work with the NVMe? Spoke too soon. After a shutdown and a bootup it failed again. Where can I check the logs to see what's up? Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 9 Administrators Share Posted January 9 First disable verbose mod(-v). In some cases this bootarg cause this problem. CSM need stay disable too. Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @danielnmaldonado@gmail.com Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Alexandros Tselikas Posted January 9 Author Share Posted January 9 Removed -v flag, CSM is disabled. Same issue Quote Link to comment Share on other sites More sharing options...
Alexandros Tselikas Posted January 10 Author Share Posted January 10 Bump Quote Link to comment Share on other sites More sharing options...