Search the Community
Showing results for tags 'boot'.
-
macOS does not boot, macOS installer boot error. Please, Help Me! My PC Configuration: Processor: Manufacturer: GenuineIntel Name: Intel Core i5 3330 Codename: Ivy Bridge Specification: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz Core Speed: 3192.4 MHz Technology: 22 nm TDP Limit: 77.0 Watts Core Count: 4 Thread Count: 4 Instructions sets: MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX Turbo Mode: supported, enabled Max non-turbo ratio: 30x Max turbo ratio: 32x L1 Cache: 4 x 32 KB (Data and Instruction cache) L2 Cache: 4 x 256 KB L3 Cache: 6 MB Memory: Memory Type: DDR3 Memory Size: 8 GBytes Channels: Dual Memory Frequency: 665.1 MHz CAS# latency (CL): 9.0 Storage: Drive 0: TOSHIBA DT01ACA100, Capacity: 931.5 GB, Type: Fixed, Rotation speed: 7200 RPM Drive 1: WDC WD5000AAKX-60U6AA0, Capacity: 465.8 GB, Type: Fixed, Rotation speed: 7200 RPM Graphics: Display Adapter: Intel(R) HD Graphics Driver version: 10.18.10.4252 Monitor: Model: 2D HD LG TV, Size: 23.1 inches, Max Resolution: 1366 x 768 @ 59 Hz -
Hi, I download the macos sonoma raw flash the files and updated the efi file with explore++ but when I tried to install it on my laptop it shows the error :: "Gtrace synchronization point 3" and it stuck there in that line Also I'm attaching the Screenshot https://ibb.co/bXQkMSS My laptop: Hp omen 15 Intel i7 9th gen Anyone knows how to fix this??
-
Hello, I need your help, it is my first hackintosh and I can not enter the pre-installation menu because I get this ACPI error - AE_NOT_FOUND (I attach an image of what I get). I am trying to install Monterey with olarila and the efi's I am using are the ones recommended here in the page, I got them from this link https://www.olarila.com/topic/5676-hackintosh-efi-folder-for-all-chipsets-clover-and-opencore-macos/ I was investigating and it says that it could be a DSDT error and the SSDT of my pc, I don't understand much about that and I don't know if someone could help me, thank you very much for reading the post, I leave you the specs of my computer, thank you. HP Pavilion Gaming Laptop 15-dk1xxx BIOS VersionF.41MOTHERBOARD-ManufacturerHPModel8741Version02.41 Devices and Drivers PROCESSOR Intel® Core™ i5-10300H CPU @ 2.50GHz GRAPHICS Intel® UHD Graphics 630 NVIDIA GeForce RTX 2060 with Max-Q Design AUDIO Realtek High Definition Audio Intel® Display Audio NVIDIA High Definition Audio NVIDIA Virtual Audio Device (Wave Extensible) (WDM) NETWORKING AND I/O Realtek Gaming GbE Family Controller Realtek RTL8822CE 802.11ac PCIe Adapter MEMORY 16 GB STORAGE ADATA XPG GAMING S11 ACPI_Error_hp.rar
-
Bom dia galera, tenho um notebook com a seguinte arquitetura, porém já testei as EFI daqui do site, mas não consigo completar o boot e chegar na tela de instalação do Monterey: CPU: Dual Core i3-6100U (Skylake-U/Y) CHIPSET: Intel Sunrise Point-LP, Intel Skylake-U PLACA GPU: Intel HD Graphics 520 REDE: Realtek PCIe GbE Family Controller Qualcomm Atheros QCA9377 Wireless Network Adapter - Desde já, agradeço pela força.
-
Hey there, While trying to install Catalina in an Acer Aspire 5830T the following problems occured: The OpenCore Bootmenu doesn't recognize my keyboard (Even external USB-keyboards doesn't work) When the installer says "2 minutes left" it reboots, which is normal afaik but OC doesn't list a new bootoption. It boots directly to the beginning of the Catalinainstaller again. I tried to copy the EFI-Partition from the USB Stick to my SSD manually, which then gave me a second option in OC. It was automatically selected but then it just boots into a black screen. As a beginner in the whole Hackintosh topic, I kindly appreciate your help.
-
It looks like that lock switch that you have on the side of your laptop sometimes. I moved the lock in every direction once but it just doesn’t change.
-
when i'm trying to install the catalina, it goes into the clover and put it to install. A lot of messages start to appear (normal) but then the computer restarts and goes back to the clover and I put it to install and stay in that infinite loop. how do i solve this? laptop asus placa mae: x555uf BIOS LEGACY cpu: i5 6200u 4gb ram nvidia geforce 930m Downloads.rar image.zip
-
so I want to install since I got an information that high sierra olarila is the only hackintosh that still supports nvidia My laptop spec: Intel(R) Core(TM) i5-10300H CPU @ 2.50GHz 2.50 GHz RAM: 8 GB Graphic Card: Nvidia GeForce RTX 2060 with Max-Q Design Graphic Card: Intel UHD Graphics EFI: https://www.mediafire.com/file/1d4bd6tx81zaxg0/EFI.rar/file I used MediaFire to attach cuz the oralila won't let me sent the file with the huge size reason -
Hi ! I have a problem with my Hackintosh. I built this hack a few years ago, on a Dell XPS 730x with it's stock motherboard, and it's stock CPU. Here was it's full specs : Motherboard : Dell OEM Board with Intel X58 Chipset, with a AMI Legacy BIOS (XPS 730x 1.0.6) Processor : Intel Core i7-920 codename bloomfield (Nehalem architecture), factory clocked at 2.67 GHz (3.1 with turbo, this thing wasn't overclocked) RAM : 12 GB (3x4) of generic RAM (motherboard's max) at 1600 MHz GPU : Sapphire Radeon RX 480 Nitro+ with 8 GB of VRAM Operating systems : Windows 10 20H1, macOS Sierra 10.12.6 It was working fine, but because this build was pretty old, I decided to upgrade it. Especielly because I tried to install Mojave on this thing, but failed, apparently because of the Legacy BIOS. So, I changed the motherboard, the processor and the RAM of the PC, with the following : Motherboard : Gigabyte Z490-UD rev 1.0, with an AMI UEFI BIOS (Z490-UD F20) Processor : Intel Core i5-10600 (Comet Lake architecture), factory clocked at 3.30 GHz (4,80 with turbo, can't be overclocked) RAM : 16 GB (2x8) HyperX Fury at 2666 MHz GPU : Same RX 480 as before This upgrade was complicated, because I was transitioning from a Legacy BIOS to a UEFI one. It needed to convert the Windows MBR disk to GPT and rebuild it's bootloader, reinstalling the system with the new drivers... And for macOS, I reinstalled Clover in UEFI mode, and changed it's configuration : I put an iMac20,2 SMBIOS, because it had the same processor, installed some new kexts, removed old ones, added the -no_compat_check boot argument to still boot on Sierra, and tried to boot. It didn't work. Clover was loading fine, but when launching the system, it was displaying a line of plus signs. It did that before with the previous motherboard, but displays verbose boot log right after. Not that time. It stayed stuck, on this plus line. I waited 30 minutes, nothing happened. Then I searched for help, and found this site, which propose a full-ready Clover folder for my motherboard. So, I downloaded it and put it on my Clover USB key, and same thing happened. Stuck at plus sign line. I don't know what's wrong. I see that some people made functionning hacks with that motherboard, so, I thing I forgot something...I searched a faulty option in the BIOS, but found nothing, everything is like asked in the tutorial for this board. So...Don't know how to fix that. Thanks in advance for your help !
-
Boa noite, Sou novato em computadores da Macintosh, mas tenho um pouco de experiência no sistema do Windows e um pouco utilizando Ubuntu. Meu desafio atual é reinstalar uma OS neste Mac que inventaram de sair formatando. E pra ajudar ainda mais, a IDMac e a senha foram perdidas. Tentei fazer a instalação da OS através do "Utilitários do OS X" selecionando a opção "Reinstalar OS X". Na tela seguinte aparece o nome ""OS X El Capitan" (Para configurar a instalação do OS X 10.11, clique em Continuar)". Eu clico em 'Continuar', aparece a opção de conectar com a internet e baixar a OS pela internet. Coloco um login e senha que tenho da Mac por conta de um iPhone. Fico logado. Mas logo ele acusa que o pacote não está disponível, que é para tentar novamente mais tarde. Já tentei durante três dias e ainda não foi possível baixar o pacote da OS e instalar via o processo automático de Reinstalação da OS X da Macintosh. Venho tentando fazer então um bootdrive. Segui os passos de fazer um bootdrive baixando a ISO da OS X El Capitan pelo site da Olarila. Fiz o processo pelo programa balenaEtcher. Pluguei o pendrive no Mac, iniciei o computador. Selecionei a opção "Disco de Inicialização". Foi dada a opção de reiniciar a máquina pelo pendrive que continha a ISO da OS X El Capitan. Na primeira vez que dei o boot ele entrou dando a opção de instalar a OS. Começou mas logo parou, acusando que não era possível continuar a instalação. Fucei mais um pouco, cliquei na opção de Desmontar ou Apagar o Mac HD por conta de um tutorial que vi na internet. Depois voltei aqui no site do Olarila, baixei a ISO do Catalina, fiz um bootdrive novo. Tentei fazer a instalação com o bootdrive do Catalina. Não entrou. Então fiz novamente um bootdrive com a OS X El Capitan. Coloquei a opção Disco de Inicialização. Reiniciou com a logo da maçã e a barrinha carregando embaixo até o final mas não entrando em nenhum tela nova depois disso. É isso. Podem me ajudar, por favor?! PS: Tentei achar o local onde tinha conseguido visualizar as configurações do computador, mas não consegui encontrá-las novamente.
-
Ola, boa tarde. Tenho o BigSur instalado, Opencore, drivers e kexts atualizados, DSDT e o boot em 80% das vezes trava nesse ponto. Tem que ficar fazendo hard reset para ele uma hora passar e entrar. Depois que entra o sistema funciona normalmente. A mesma máquina com Catalina não tinha esse problema. Alguma dica? É uma Gigabyte Z390 Gaming X, I5 9400f, RX580.
-
Realizei a instalação do BigSur num Acer Aspire 5 com Clover. Relatório Aida64 e pasta EFI estão anexadas no link* Nele possuo os seguintes problemas: - boot demora para subir o OS. Um command line fica repetindo: HalDmWatchDog() et RF changeIn Progress=T (imagem anexada no link) Há pouca informação em relação a isso nos fóruns. Encontrei algo e apontaram relação com os Kexts Voodool2C. Em outro lugar, vi relação com antena, e no caso, possuo um adptador TP-Link para Wifi. - Mount ESP Pro não mostra os drives e quando mostra, não monta a EFI Consigo montar as vezes, pelo CCG, quando reinicio a máquina ou se eu subir o OS pelo pendrive com uma EFI mais antiga. De resto, aparentemente está tudo certo. Aceleração gráfica, trackpad com gestos e audio. Após conseguir resolver esses problemas acima, pretendo mapear as portas USB. Link Download Anexos https://drive.google.com/file/d/1vphoWvNMgEQJBkT6xOHBs9HDwg8jD_6F/view?usp=sharing Desde já agradeço a ajuda.
-
I download and made my own EFI and try running it, for some reason it is in a boot loop when tries to boot from the SSD, Attaching a screen shot of last run commands and config.plist Just for information, I downloaded the OS from vmware's Mac on my pc config.rar
-
Hi all I fresh install Big sur use OC 0.6.3 follow guide dortania I installed successfully but take a lot of time to boot about 5 mins for once boot, and the same for shutdown My specs I5 9400f B365m Asrock Ram 8Gb*2 RX 580 8Gb Below is my config. plist file Please help me check file config, do it have any issue thanks config.rar
-
Pessoal bom dia. Cheguei rodar o beta do BigSur aqui e até acho que foi tranquilo. Vi que tem a imagem do Olarila da versão final e criei pelo Balena. Fui instalar no meu setup (i5 9400, Gigabyte Z390 Gaming-X e RX570) e ficou travado um pouco depois de rodar umas coisas. Para não ficar futucando onde não conheço (OpenCore) eu preciso selecionar/alterar algo para instalar via pendrive? Obrigado -
Hello there! Few weeks ago i had a High Sierra machine working perfectly! Than i decided to try Mojave but it was a nightmare as my Intel HD graphics won't work at all so i decided to go back to High Sierra but it is impossible to get the USB thumbstick to boot the installer on my computer. Sometimes the USB flashdrive would appear but will not boot at all saying it requires a boot device to work or it would not show up at all on the boot devices list, tried UEFI, Legacy, AHCI modes, VT-d disable/enable, XHCI and etc... Also tried on different USB ports (2.0/3.0) and nothing would work, funny because on Windows the USB stick works perfectly with no issues at all I have no idea on what's going on so i decided to come here and create this thread. Here's a quick video of it and BIOS settings My system: Intel Core i5 4460 Gigabyte H81M 16GB = 2x8GB DDR3 HyperX Nvidia GeForce GTX 970 4gb SSD 120gb for Win10 HDD1 1TB for Games on Win10 HDD2 250gb for Hackintosh (previously with HS working on it) Apple USB Keyboard and a Logitech G400S mouse Any ideas everyone? -
Quando aperto para instalar o boot no notebook, ele simplesmente volta para tela de boot da HP. O sistema operacional que to tentando colocar no notebook é o High Sierra. Notebook: HP Pavilion dv2000 Link para o vídeo mostrando o que acontece: https://drive.google.com/file/d/1Dplqf4kDXvXEo7fJ9dwTLOdosHqajT2A/view?usp=sharing -
hey guys, for some reason, when i press for boot OS X Install, appears this: Error while loading boot.efi. help pls, also, sorry for my english ;-; and, sorruy if it is in the wrong category :/ erro muito chato alguem me mata.rar
-
I need help in Open Core Config so I can boot Big Sur installation My device : Intel Core i3 Gen 3rd Ivy Bridge laptop I dont know how to fix this? it says you have 15 settings in UEFI section in the plist you should have 16 settings, how to get / what setting should I add? Open Core 0.6.0 -
OSX catalina on asus vivobook pro N580VD-FY161T
Samuele Trisolino posted a topic in Catalina (10.15)
Hello, i have this pc. asus vivobook pro N580VD-FY161T 2.8GHz i7-7700HQ. 16gb ram. ssd 128gb. hdd 1tb. gtx 1050 4gb. I would to install hackintosh but i have some problem and the devices is reboot every times. Can someone help me?. also, there is another version of osx that can bo correctly runs by my pc?. sorry for my english. verbose mode.rar -
@MaLd0n, I need some help with this. Desperately stuck with no solution to this issue. I am trying to install Mojave using opencore. I have followed the guide for Skylake systems. My issues are 2 fold. First is the kernel panic. I have attached the screenshot of it. Its related to AppleIntelSKLGraphics.kext. I have followed various combinations of the guide just to get into the system but I end up getting a kp. The kp happens on the second boot during installation. I can boot into the installer just fine. The files get copied and the installer reboots and then I am presented with the kernel panic. At the installer screen, I can even use an external monitor via dvi to hdmi cable. yet once installation begins and restarts to continue the process, it give a kp. I have tried the DVMT Patches in Config.plist and I still can't the panic to go away. If I follow the default recommendation of opencore to not add anything to plist, I can boot to the installer but the installation is slow as described below. I am attaching my efi folder zipped and the images of the kernel panic. Second, if I use a device id for Graphics, the installer will take an eternity.... it shows 1h and 45 minutes to complete install but after 1 hour it just hangs. The progress is painfully slow. My system specs are: Lenovo ideapad 110 15ISK. Intel i3 6006U Intel HD 520 graphics. 4gb ram 128gb SSD in primary slot with Windows 10 on it 128gb SSd in ODD using a caddy, to which I am installing Mojave. NO DVMT settings in the BIOS. EFI.zip IMG_20200702_234649 (Large).7z -
Hey MaLd0n, I really liked the method of Olarila. I'm currently installing Catalina 10.15.5. My system easily boots up with Olarila image. My Specs: SONY VAIO VPCEHEN25 intel core i3 2330m Nvidia GT410m 6gb Ram I faced one of the issues in which i cannot select the disk to install Catalina, so through one of your posts, i changed the name to "iMacPro1,1" and it worked. Now, the other issue i am facing is "An error occurred while preparing the installation" when its just about 2 minutes to install. I repeated all this almost for 10 times before writing. I saw many of your posts, and there was mentioned to copy EFI and DSDT patches and clear nvram. Now i am completely new to this. I found the EFI and DSDT on the website. But how do i copy it or move to the usb installer, i don't know. While plugging back in the usb to windows 10, the files are not accessible. Also, i don't have access to any macOS, just windows 10. I don't know to extract table from USB installer. If you need any system file, do tell me in which directory the files are present and i'll get back to you. I dont know to extract table from USB installer. Please help me out. Any help would be appreciated. -
Hi guys, I'm trying to first boot Catalina from Pendrive and this is happening when I choose "Install MacOS". I tried both configs from "config" settings in boot menu and both are not working. What should I do in this situation? Secure Boot is disabled. My specs: HD5500 i7-5600u 8GB ram X1 carbon 3rd. imgs.rar
-
after first time successfully install macOS 10.15.4, I can not boot without usb drive. I mean I have to insert olarila installer usb drive to boot Mac. and I can not shutdown my pc, every time its restart. my pc info - 9th gen i3 msi h310m pro-vh radeon rx 580 16 gb ddr4 ram 256 gb ssd plz help Thanks
-
Hi, i decided to install latest's clover bootloader and my system was running ok since this update (MSI Z170 + skylake i5-6500 + radeon 580) it was clover 5105. Now after updating to 5114 i can reach clover bootloader and chose my system from windows, ubuntu or mojave but when i chose mojave i got an error showing : cant read kernel cache, press a key to restart. it only does this with mac, i can start windows and ubuntu ok. Can you explain me what's wrong with this update for me ? below sent my config.plist thanks in advance config.plist.zip
