DSDT patch requests

warra · March 26, 2013

Hi, I've installed ML 10.8.3 successfully, one issue for me is wake from sleep, sleep works but when I'm trying to login I can't write password.

System log show: " The USB device HubDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by issuing a remote wakeup (2)".

I must fix my DSDT? (I applied all patches for my TK85).

Regards

DSDT_TK85.aml.zip

artur-pt · March 26, 2013

hello

try this one

DSDT.aml.zip

good hack

warra · March 27, 2013

hello

try this one

[attachment=0]DSDT.aml.zip[/attachment]

good hack

Thanks,

I tried but I still have the same issue. I think power management of EHCI or UHCI are the problem.

artur-pt · March 27, 2013

hello

i apply one of the patches in ehci2

u can try apply the other patch

is in forum for download

good hack

falcorn · March 28, 2013

Hi,

I need to patch this dsdt.aml i've extracted it trought aida64.

I need native wifi (cause WiFi Atheros AR9285 kext works but it shows the wifi card as an ethernet and i can't see the real ethernet card on the laptop), audio (voodoohda works but i prefer to not install kext if possibile), battery (it doesn't show me the battery indicator) brightness control (it doesn't work) and sleep functionality.

If you want and If you can, please add others hardware compatibility to that file.

It's for an HP dv6-3012el

Many thanks

DSDT.zip

artur-pt · March 28, 2013

@falcorn

there it is

DSDT.aml.zip

read and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

hdef layout 12 injected in dsdt for applehda.. must find one patched for u alc...

i don't understand what u say about wireless and ethernet if u try to say that wifi is in en0, is normal because u don't have ethernet card installed , so wifi stay in en0..

good hack

falcorn · March 28, 2013

when i installed ML in network i saw only ethernet (the real ethernet card) after that i installed the ar9285 kext. Now in network i can see only the wifi card shown as "ethernet". I can't see my real ethernet card.

isotopo · March 28, 2013

Hello, I'd like my DSDT to be patched in order to achieve SpeedStep, brightness and Fn keys.

Thank you very much.

i3 X54C

MB K54C

HD 3000

Sandybridge

Send me Rosa’s MacBook Pro.zip

artur-pt · March 28, 2013

@isotopo

try this one

DSDT.aml.zip

read and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

http://Olarila.com/forum/viewtopic.php?f=28&t=2193

good hck

mrintegra · March 29, 2013

Please add necessary patches to DSDT to enable sleep, if possible and audio for HDMI out. Thank you in advance and I will kindly send another donation for any assistance that will be provided.

System: JetWay JBC600C99352W-BW

CPU: Atom D525

GPU: nVidia ION 2

Send me Jetway.zip

MattisLind · March 29, 2013

Hello Experts!

I am completely new to hackintoshing so I am learning a lot. I have put together an old Asus p5W DH Deluxe mobo with Core2Duo E6400 CPU, Nvidia Geforce 8600GT and 4 Gigabyte 800 MHz memory.

I installed it using MyHack 3.1.2 (multishit would give me PCI configuration begin hang).

Then I started fiddling with the DSDT. I applied the following patches successfully:DTGP, ICH7 LPC, EHCI, IRQs, EHCI sleep

The machine still boots, but gets occasional KPs at boot, probably due to VooDooHDA.

Speedstepping was working, I could verify it to switch between 1,6 GHz and 2.13 GHz. But not sleep. Then I regognized that the NullCPUPowerManagement.kext was still loaded. I found it burried in a myHack.kext. Removed it and then the machine could sleep (but not wake up). But the Speedstepping feature were gone. It was fixed at 1.6 GHz. Cinebench was significanly slower.

SMC Monitor gives this for P&C states:

2136	0	10	10	2085	1
1869	0	10	10	1826	2
1602	0	10	10	1565	3

But it simply won't switch.

I have

<key>GeneratePStates</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>

in org.chameleon.Boot.plist

This is the boot log:

Mar 29 18:15:34 localhost bootlog[0]: BOOT_TIME 1364577334 0
Mar 29 18:15:55 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Mar 29 18:15:55 localhost kernel[0]: vm_page_bootstrap: 1010027 free pages and 30357 wired pages
Mar 29 18:15:55 localhost kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
Mar 29 18:15:55 localhost kernel[0]: zone leak detection enabled
Mar 29 18:15:55 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 29 18:15:55 localhost kernel[0]: standard background quantum is 2500 us
Mar 29 18:15:55 localhost kernel[0]: mig_table_max_displ = 74
Mar 29 18:15:55 localhost kernel[0]: Refusing new kext com.apple.driver.AppleRTC, v1.5: already have prelinked v1111.0.
Mar 29 18:15:55 localhost kernel[0]: corecrypto kext started!
Mar 29 18:15:55 localhost kernel[0]: Running kernel space in FIPS MODE
Mar 29 18:15:55 localhost kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 29 18:15:55 localhost kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Mar 29 18:15:55 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Mar 29 18:15:55 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 29 18:15:55 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
Mar 29 18:15:55 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=130 Disabled
Mar 29 18:15:55 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=131 Disabled
Mar 29 18:15:55 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 29 18:15:55 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 29 18:15:55 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 29 18:15:55 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 29 18:15:55 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 29 18:15:55 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 29 18:15:55 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 29 18:15:55 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 29 18:15:55 localhost kernel[0]: MAC Framework successfully initialized
Mar 29 18:15:55 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 29 18:15:55 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 29 18:15:55 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5]
Mar 29 18:15:55 localhost kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
Mar 29 18:15:55 localhost kernel[0]: [ PCI configuration begin ]
Mar 29 18:15:55 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)
Mar 29 18:15:55 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 00:59:42 Aug 25 2012) initialization complete
Mar 29 18:15:55 localhost kernel[0]: PCI configuration changed (bridge=3 device=2 cardbus=0)
Mar 29 18:15:55 localhost kernel[0]: [ PCI configuration end, bridges 6 devices 15 ]
Mar 29 18:15:55 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Mar 29 18:15:55 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 29 18:15:55 localhost kernel[0]: rooting via boot-uuid from /chosen: 118E4969-74FE-3288-B74F-FFEAB05CF449
Mar 29 18:15:55 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 29 18:15:55 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 29 18:15:55 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 29 18:15:55 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 29 18:15:55 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 29 18:15:55 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 29 18:15:55 localhost kernel[0]: FireWire runtime power conservation disabled. (2)
Mar 29 18:15:55 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE1@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40NGB2 Media/IOGUIDPartitionScheme/Mountain Lion@2
Mar 29 18:15:55 localhost kernel[0]: BSD root: disk0s2, major 1, minor 1
Mar 29 18:15:55 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 17815040 to: 1156096 (joffset 0x747000)
Mar 29 18:15:55 localhost kernel[0]: FireWire (OHCI) TI ID 8023 PCI now active, GUID 0011d80000f97ed0; max speed s400.
Mar 29 18:15:55 localhost kernel[0]: USBMSC Identifier (non-unique): 81URQFT1SNJQNUYG 0x8564 0x1000 0x1100
Mar 29 18:15:55 localhost kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
Mar 29 18:15:59 --- last message repeated 1 time ---
Mar 29 18:15:55 localhost kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
Mar 29 18:15:59 --- last message repeated 1 time ---
Mar 29 18:15:55 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Mar 29 18:15:55 localhost kernel[0]: Kernel is LP64
Mar 29 18:15:55 localhost kernel[0]: hfs: Removed 1 orphaned / unlinked files and 15 directories

So AppleIntelCPUPowerManagement seems to be running.

Another result with removing the NullCPUPowerManagement.kext was that the CPU voltage was lowered from 1.287 to 1.187 Volts.

I append the current DSDT.

How can I make it wake up after sleep?

How can I make speedstep work?

Is there a DSDT patch I can apply? Please point me in the right direction.

Thanks for any input

/Mattis

DSDT_After_EHCI_sleep_patch.aml.zip

artur-pt · March 29, 2013

hello

is in the data base forum u mobo patch....

http://Olarila.com/Packs/Asus/P5W%20DH%20deluxe.txt

good hack

MattisLind · March 29, 2013

Hello!

Thank you for pointing it out. Unfortunately it didn't work out for me.

It gets stuck at

PFM64 (36 cpu) 0xf8000000, 0x00000000
[ PCI configuration begin ]
RTC: Only single RAM bank (128 bytes)

I forgot to mention that the BIOS version is the latest, 3002.

I also have been fiddling with Audio, replacing VooDooHDA which gives me KPs everyother boot.

I tried the patches for ALC882 as indicated in http://Olarila.com/forum/viewtopic.php?f=19&t=749

But couldn't get it working. I cannot see that AppleHDA is loaded. In /Extra/Extensions I have AppleHDA and HDAEnabler but none of them is loaded.

I compared with the ALC883 patches and changed codec-id to xxxx883. But no difference. I modified the "LayoutID" in AppleHDA to 12. But no change as well..

Any hints what I could do here?

/Mattis

artur-pt · March 30, 2013

hello

only apply the patch in dsdt + applehda original it will never work...

must have the injection of u codec in dsdt and find or patch a applehda for that codec...

mac machine don't use alc...

send the untouched dsdt of u mobo and see all about applehda

http://Olarila.com/forum/viewtopic.php?f=28&t=2676

good hack

isotopo · March 30, 2013

@isotopo

try this one

[attachment=0]DSDT.aml.zip[/attachment]

read and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

http://Olarila.com/forum/viewtopic.php?f=28&t=2193

good hck

Thanks for your earlier answer and the excellent DSDT, everything is working perfectly out of the box except for the webcam although it's recognised in system profiler. Is it a compatibility issue or can be fix either way?

is there any chance to change the keyboard keys to spanish? I mean not in preferences because when I choose spanish iso keyboard, there are some keys out of place

Thanks again.

Cheers.

isotopo · March 30, 2013

Thanks for your earlier answer and the excellent DSDT, everything is working perfectly out of the box.

is there any chance to change the keyboard keys to spanish? I mean not in preferences because when I choose spanish iso keyboard, there are some keys out of place

Thanks again.

Cheers.

artur-pt · March 30, 2013

hello

i think it must have it in spanish forum...

http://www.osx86.net/downloads.php?do=file&id=1892

http://www.insanelymac.com/forum/topic/95568-appleps2keyboardkext-habilita-en-teclado-espanol/

something like we have for layout pt_br or pt_pt

good hack

Hijau31 · March 30, 2013

Please anyone can help me.

My DVD drive is not recognized after applying DSDT patch.

Please find the DSDT attached.

DSDT-Sleep&OnLidClose.zip

SOLVED : I remove the above DSDT and extract new DSDT then apply some patches (DTGP and EHCI) and follow this guide http://www.hackintosh-india.com/p/a-simple-and-complete-dsdt-guide-for.html to enable sleep on lid close

Edited April 1, 2013 by Guest

mrintegra · March 30, 2013

@ artur-pt, did you get a chance to check my files to compile a DSDT?

artur-pt · March 30, 2013

@mrintegra

try this one

DSDT.aml.zip

read and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

about the hdmi if u use voodoohda no need dsdt to enable it, only edit the voodoohda plist and remove applehda

if u gonna use applehda, must find one for u codec + dsdt patch for u codec and for hdmi in u nvidia

is a specific patch to insert for u nvidia...

hdef layout 12 (0C) injected in dsdt for applehda...

good hack

mrintegra · March 30, 2013

@artur-pt

I was trying to avoid the use of VoodooHDA as it might cause a kernel panic upon boot up as well as stopping my hack from sleeping. I will give the DSDT along with the latest VoodooHDA a shot and hope that it all works out. Thanks again for your help!

@mrintegra

try this one

[attachment=0]DSDT.aml.zip[/attachment]

read and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

about the hdmi if u use voodoohda no need dsdt to enable it, only edit the voodoohda plist and remove applehda

if u gonna use applehda, must find one for u codec + dsdt patch for u codec and for hdmi in u nvidia

is a specific patch to insert for u nvidia...

hdef layout 12 (0C) injected in dsdt for applehda...

good hack

isotopo · March 30, 2013

hello

i think it must have it in spanish forum...

http://www.osx86.net/downloads.php?do=file&id=1892

http://www.insanelymac.com/forum/topic/95568-appleps2keyboardkext-habilita-en-teclado-espanol/

something like we have for layout pt_br or pt_pt

good hack

Cheers Artur,

I was wondering if the issue with USB eject after sleep could be corrected

/thanks

mrintegra · March 30, 2013

If you're using USB 3.0, then it's an issue with OS X. I came across an app on the AppStore called Jettison that will eject plugged in devices before it sleeps automatically and the devices will appear after wake.

Cheers Artur,

I was wondering if the issue with USB eject after sleep could be corrected

/thanks

MattisLind · April 1, 2013

hello

only apply the patch in dsdt + applehda original it will never work...

must have the injection of u codec in dsdt and find or patch a applehda for that codec...

mac machine don't use alc...

send the untouched dsdt of u mobo and see all about applehda

http://Olarila.com/forum/viewtopic.php?f=28&t=2676

good hack

Thanks a lot artur-pt for helping out.

I appended the original DSDT.

The pathches I have applied this far is: DTGP, IHC7 LPC, EHCI, IRQs, EHCI sleep, HDEF, HDEF_DSM and SBUS.

Now there are no errors reported in the kernel log file.

Comparing my set of patches to the P5W DH Deluxe patches you pointed out I found some differences:

My set does not include these patches: "HID para CID", Shutdown. What are their purpose?

And the following patches I cannot find matching patches in the download section, what are they doing?

into device label SPKR remove_entry;
into device label FDC remove_entry;
into device label FDC0 remove_entry;
into device label LPT1 remove_entry;
into device label LPTE remove_entry;
into device label LPT remove_entry;
into device label ECP1 remove_entry;
into device label MEM remove_entry;
into device label ^^RMEM remove_entry;

The HDEF patch in the P5W DH Deluxe patch-set refers to "parent_label PCI0" rather than "parent_hid PNP0A08". What is the difference?

My problem right now:

Audio is only working with VooDooHDA, but it gives me KP at startup sometimes.

I guess that I have to dig into the AppleHDA area extracting CODEC information etc.

By the way, is there a simple way of producing a diff between DSDT files, getting those nice patches you are producing? I cannot see that function in DSDT editor and google wasn't very helpful to me.

EDIT: I found that by disabling USBLegacySupport in the BIOS the machine would wake up. The only drawback is that you cannot enter in to chameleon boot menu since keyboard doesn't work without LegacySupport. Tried USBBusFix=Yes. No difference.

EDIT2: By changing the Mac type to Mac Pro 3,1 speedstepping started to work.

/Mattis

DSDT.aml.zip

Edited April 1, 2013 by Guest

pentothal · April 1, 2013

Hi all,

I would like to have a working dsdt and get rid of nullcpupowermanagement.kext so I can have native speedstep. Also my internal lcd is recognized as AppleDisplay in the registry (usually it is an external display) and not as AppleBacklightDisplay. I have a i3-350M processor with intel hd graphics first gen (no dedicated gpu). If I istall the appleintelhdgraficsFB.kext I get a spinning wheel and the apple logo than after a few seconds I have a white screen. Maybe if we create a good dsdt I have have the FB working.

This is the post to have qe/ci or only ci working for first gen intel hd graphics:

http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

Attached my DSDT extracted from Linux Mint 64bit.

Please create a patched dsdt.

Best regards

Pentothal

Send me .zip

dsdt.aml.zip

Sign In

DSDT patch requests

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation

Hackintosh Tutorials

Hackintosh Tutorials

Support Olarila by making a donation