ATI Graphics

[daksi99]

hello

i'm afraid is not supported

try the 2600 and 3800

good hack

Thanks for answer, i changed 3800 and x2000 kexts and GraphicsEnabler,Ati config-Megalodon but read only 3800,x2000 and atisupport.No res. and still vram-3mb.

[cdnghost]

Hey, So I am new to all this. I have successfully gotten Mountain Lion 10.8.2 running, my video card seems to be working properly except for one major annoyance...

Here are my system Specs

OS: OS X Mountain Lion 10.8.2

CPU: Intel i7-2600k 3.20GHz

MOBO: Gigabyte GA-Z68MA-DH2-B3 BIOS: U1b

RAM: AMD Performance Edition 4x4GB DDR3 @ 1600MHz

Video: AMD Radeon HD 5870

Monitor: SyncMaster 305t via DVI-D (no other options only has DVI-D in)

HDD: Patriot Pyro SE 120GB SSD, 2 x 2TB Segate HDDs

From power on I get signal showing my Bios screen, followed by the boot menu then the grey apple screen and logo.

This is when things get wired, i loose video screen goes black.

I then have to unplug my monitor and plug it back into the graphics card and then it all works as normal.

One odd thing to me happens though, if I add a second monitor by using an HDMI plug into a toshiba 24" LED TV and have my main

monitor plugged into the DVI port then everything works as it should. Without the second monitor via HDMI I get the black screen...

any suggestions?

Oh my video card has been added to my DSDT so i have a very small boot.plist which is as follows

<?xml version="1.0" encoding="UTF-8"?>

DSDT

/Extra/DSDT.aml

EthernetBuiltIn

Yes

Instant Menu

Yes

Kernel

mach_kernel

USBBusFix

Yes

UseKernelCache

Yes

If any other info is needed I will gladly supply it just want to get to the bottom of this

[artur-pt]

hello

what ati framebuffer are u using ?

define also the number of ports u have in ati ...

http://www.insanelymac.com/forum/topic/281571-5870-and-ml-108-no-qici/

good hack

[cdnghost]

hello

what ati framebuffer are u using ?

 

None... I dont know which to use....

 

define also the number of ports u have in ati ...

http://www.insanelymac.com/forum/topic/281571-5870-and-ml-108-no-qici/

good hack

 

The card i have is the Official AMD ATI Radeon HD 5870 ref card

do I still need to define the number ports if the card info was added to my DSDT? or should i still do it for kicks?

Thanks

(Just tried adding this still nothing...)

AtiConfig

Uakari

AtiPorts

4

[artur-pt]

hello

that happen in all dvi ports of the card ?

sometimes only change the port do the trick

good hack

[cdnghost]

hello

that happen in all dvi ports of the card ?

sometimes only change the port do the trick

good hack

 

I have tried changing between ports, and yes it does it for both of them.....

Edit:

So Today i tried GraphicsEnabler=no AtiPorts=4 I then added one at a time from the boot menu

AtiConfig=

and did each one of these

Vervet

Douc

Langur

Uakari

Zonalis

Alouatta

Hoolock

Baboon

Eulemur

Galago

Colobus

Mangabey

Nomascus

Orangutan

The only one that kinda worked was Alouatta, but i was only getting 1280*800 and no other options for display resolution...

if i boot with just graphics enabler=no and AtiPorts=4 i have to unplug the monitor like each other time but i get full res and everything works...

[cdnghost]

Anyone?

[waiteck]

Hi,

I am currently using ML 10.8.2 on my Toshiba Laptop.

Currently drivers for my Audio, USBs, Touchpad from multishit are all functioning well.

Except for my graphics card. ATI HD 5470M.

I am still currently using stock kexts as I read from other posts elsewhere that they should work out of the box.

Using kextstat, I saw these lines:

62    1 0xffffff7f814db000 0x1ea000   0x1ea000   com.apple.kext.AMDSupport (8.0.0) <61 10 9 7 5 4 3 1>
63    0 0xffffff7f816c5000 0x49000    0x49000    com.apple.kext.AMD5000Controller (8.0.0) <62 61 10 9 5 4 3 1>
81    0 0xffffff7f81b25000 0x3ce000   0x3ce000   com.apple.AMDRadeonAccelerator (1.0.0) <80 64 61 10 7 5 4 3 1>

 

The only resolution available is 1024x768 and not being able to detect my card.

Graphics showed up as: Graphics 3MB.

I tried using Eulemur, Hoolook for AtiConfig. Also even if GraphicsEnabler=Yes, it doesn't work.

Can anyone please advice what I should do next? Thanks!

Here is my chameleon boot.plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>AtiConfig</key>
<string>Eulemur</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>

[waiteck]

Anyway, I just managed to get my card up and running well!

No additional kexts needed, I just used the stock kexts provided.

I only did a force EDID and put GraphicsEnabler=Yes.

And everything will appear nicely

 

Hi,

I am currently using ML 10.8.2 on my Toshiba Laptop.

Currently drivers for my Audio, USBs, Touchpad from multishit are all functioning well.

Except for my graphics card. ATI HD 5470M.

I am still currently using stock kexts as I read from other posts elsewhere that they should work out of the box.

Using kextstat, I saw these lines:

62    1 0xffffff7f814db000 0x1ea000   0x1ea000   com.apple.kext.AMDSupport (8.0.0) <61 10 9 7 5 4 3 1>
63    0 0xffffff7f816c5000 0x49000    0x49000    com.apple.kext.AMD5000Controller (8.0.0) <62 61 10 9 5 4 3 1>
81    0 0xffffff7f81b25000 0x3ce000   0x3ce000   com.apple.AMDRadeonAccelerator (1.0.0) <80 64 61 10 7 5 4 3 1>

 

The only resolution available is 1024x768 and not being able to detect my card.

Graphics showed up as: Graphics 3MB.

I tried using Eulemur, Hoolook for AtiConfig. Also even if GraphicsEnabler=Yes, it doesn't work.

Can anyone please advice what I should do next? Thanks!

Here is my chameleon boot.plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>AtiConfig</key>
<string>Eulemur</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>

[brolle81]

Hi new here been searching forums like mad for over 3 weeks now about how to get my Graphics card to work like it should in Snow Leopard 10.6.8. I have tried various install variations 32bit 64bit mode. I have tried pretty much every kext i have been able to find that "states" fully working 5850 etc. I can open every application that i have installed except DVD then i get an error message. When running Cinebench 11.5 i get 13.3 FPS if using Xbench 1.3 118.9 OpenGL Graphics test And 122,84 on the Quartz Graphics Test on user Interface Test i get 164,56. So i have figured out that it seems like i have QE/CI working somewhat but perhaps not perfect. If running System Info it says the card is fully working. When i plug in display to vga port my lsvd or main screen what u call it goes black, if i plug into the hdmi both screens get picture but if i unplug hdmi main screen goes black. I have no DSDT at the moment since I still havent figured out how to compile one i have tried extracting from mac os x but that seems totaly wrong and i have tried using AIDA64 on my windows side but when i choose save table i get 7 diffrent SSDT files. In the about this mac tab it states i got a macmini 2.1 and my cpu is displayed with I7 1,79 ghz and ram is correctly shown but graphics card says 5000 series. With the system info app it seems like my card is using 4 diffrent kext to get it to run "correctly" i have tried scanning olarilla.com for kext but most of those that system info claims I am using i can´t download for some reason. I have found all four with Confirmation about my card in the info on what cards are supported for that kext.

Any help would be great so i can get this working a bit better.

[artur-pt]

hello

u have a notebook so why use a macmini smbios ?

u must use macbookpro6,1 or 6,2 smbios...

and try to use another frame buffer like orangutan or uakari or vervet

and maybe use a legacyAGPM.kext

http://Olarila.com/forum/viewtopic.php?f=18&t=1839

good hack

[brolle81]

Yes correct i got a notebook or desktop light depending on how you look at it. I haven´t changed the smbios.plist yet since my most recent re install after a couple of bad choices trying to chase performance gain. Just to be sure we are talking about the smbios.plist located in the temp folder or is there another? I tried with help of chameleon wizard last install to change to diffrent modes but i didn´t notice any changes in performance at all but perhaps it´s deeper rooted then just that. Regarding framebuffer all pages i have read says I am supposed to run Nomascus if I am not mistaking ? But to try out a diffrent is that by using the AtiConfig= command at boot or do i have to dig into some plist and edit it ? I added a file on screenshot of cpu id and gpu z from windows just to make sure you know what exact card I have. The LegacyAGPM do i just put that in S/L/E amongst with all others or is that supposed to be placed in some diffrent Folder? A lot of newbie questions but I have only been trying for 3 weeks without anyone to help me except reading forum threads all around the web.

[artur-pt]

hello

read this

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

http://Olarila.com/forum/viewtopic.php?f=18&t=1703

http://translate.google.com/translate?sl=pt&tl=en&js=n&prev=_t&hl=pt-PT&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2FOlarila.com%2Fforum%2Fviewtopic.php%3Ff%3D2%26t%3D1302&act=url

good hack

[brolle81]

Thanks I will read up on all this one last question though. I have read somewhere that you should pick the smbios closest to your actual specs from start does it matter ? Because if i where to choose MacBook Pro then 6.1 or 6.2 i would be wrong i assume since they are running other cpus and nvidia graphics 512 mb?

[artur-pt]

hello

man u have a core i 1ª generation

use chameleon wizard and see the closest cpu to yours

and is 6,1 or 6,2...

good hack

[brolle81]

Okey i see . I have now made a org.chameleon.plist file in extra along with a smbios.plist also installed the legacyagm.kext in s/l/e after changing vendor id and device id to 1002 68a1. Tried fiddling around with various aticonfigs as u mentioned and nomascus aswell without any diffrence at all. About this mac now doesn´t say I7 anymore but only @2940 mhz , but it is properly shown in benchmark programs. i read the thing about sudo ./SSDTGenPR but couldnt understand that at all but i will give it one more shot later and try to understand it. I have never hacked och tried on these kind of things i have only been messing around in windows register a few times with simpler tasks going by guides on how to . Tried smbios.plist for MacPro 3.1 /MacBook Pro 6.1 / 6.2 Imac 11.1/11.2/11.3 nothing really changes any outcome. Tried enabling both p and s state but that gave cpu kp with only P state i saw no diffrence toggled graphics enabler on off no change. Cinebench looks at my card as a 5750 but perhaps that is nothing to care about. About this mac still only calls it 5000 . Perhaps only way to settle this is trying to make if possible small dsdt with the necessary information about cpu ram and graphics if its possible to just add those things but i suppose mobo info etc etc is needed aswell in order for it to run properly.

[lidas]

hello, I ask a lot of help, I have a schda HD6950 video that I can not let go with Mountain, I tried to follow your guide but I can not, I've always white monitor at the end (my ID 6719 1002),

my motherboard is a p8z68 deluxe gen3

can you help me please

[artur-pt]

hello

see here

http://www.insanelymac.com/forum/topic/280159-amd-dual-graphics-6950-supported/page__st__20

good hack

[lidas]

I've seen that guide but I can not let go of my card I always find myself with white screen

[artur-pt]

hello

what familly have u choose in amdradeonacelerator ?

is u dev id native in kext ?

also in ati6000controller ?

u can boot with ge=no ?

good hack

[lidas]

but will not work, it makes all the startup screen then black and then white screen,

I installed another hd lion 10.7.0 and it works fine, I can upgrade to lion 10.7.4 or will I have problems

I think I'll sell the HD6950 video card what do you advise me?

[artur-pt]

hello

This is a native cards

ATI Radeon HD 5630 Device ID 0x68D8

ATI Radeon HD 5630 Device ID 0x68D9

ATI Radeon HD 5670 Device ID 0x68D8

ATI Radeon HD 5730 Device ID 0x68D8

ATI Radeon HD 5770 Device ID 0x68B8

ATI Radeon HD 5850 Device ID 0×6899

ATI Radeon HD 5870 Device ID 0×6898

AMD Radeon HD 6850 Device ID 0×6739

AMD Radeon HD 6870 Device ID 0×6738

AMD Radeon HD 6970 Device ID 0×6718

but this is hack...

buy sapphire

good hack

[lidas]

hello

This is a native cards

ATI Radeon HD 5630 Device ID 0x68D8

ATI Radeon HD 5630 Device ID 0x68D9

ATI Radeon HD 5670 Device ID 0x68D8

ATI Radeon HD 5730 Device ID 0x68D8

ATI Radeon HD 5770 Device ID 0x68B8

ATI Radeon HD 5850 Device ID 0×6899

ATI Radeon HD 5870 Device ID 0×6898

AMD Radeon HD 6850 Device ID 0×6739

AMD Radeon HD 6870 Device ID 0×6738

AMD Radeon HD 6970 Device ID 0×6718

but this is hack...

buy sapphire

good hack

 

So what I advice you is to change the video card will not be able to go completely maia my HD6950 is not it?

but what do you recommend for failing prblemi?

afar and I can go three monitors

[daksi99]

Hello frends help with my card hd2600 512mb,probe with macpro 3.1 or imac 8.1 but no luck.No read atiframebuffer.Here my kextstat Last login: Fri Feb 15 07:42:20 on console

Zhivodar-Ivanovs-Mac-Pro:~ zhivodarivanov$ kextstat

Index Refs Address Size Wired Name (Version)

1 46 0 0 0 com.apple.kpi.bsd (10.8.0)

2 4 0 0 0 com.apple.kpi.dsep (10.8.0)

3 60 0 0 0 com.apple.kpi.iokit (10.8.0)

4 66 0 0 0 com.apple.kpi.libkern (10.8.0)

5 54 0 0 0 com.apple.kpi.mach (10.8.0)

6 21 0 0 0 com.apple.kpi.private (10.8.0)

7 39 0 0 0 com.apple.kpi.unsupported (10.8.0)

8 0 0 0 0 com.apple.kernel.6.0 (7.9.9)

9 0 0 0 0 com.apple.kernel.bsd (7.9.9)

10 1 0 0 0 com.apple.kernel.iokit (7.9.9)

11 0 0 0 0 com.apple.kernel.libkern (7.9.9)

12 0 0 0 0 com.apple.kernel.mach (7.9.9)

13 17 0x2e5dd000 0x12000 0x11000 com.apple.iokit.IOPCIFamily (2.6.3) <7 5 4 3>

14 11 0x2e586000 0x4000 0x3000 com.apple.iokit.IOACPIFamily (1.3.0) <7 6 4 3>

15 1 0x2e815000 0x42000 0x41000 com.apple.driver.AppleACPIPlatform (1.3.5) <14 13 7 6 5 4 3>

16 0 0x2836d000 0x2000 0x1000 es.osx86.driver.EvOreboot (1.0.3) <4 3>

17 0 0x2e385000 0x2000 0x1000 org.tgwbd.driver.NullCPUPowerManagement (1.0.0d2) <7 4 3>

18 8 0x2e7e7000 0x19000 0x18000 com.apple.iokit.IOStorageFamily (1.6.3) <7 6 5 4 3 1>

19 0 0x2e800000 0x11000 0x10000 com.apple.driver.DiskImages (289.1) <18 7 6 5 4 3 1>

20 0 0x2e8fe000 0x8000 0x7000 com.apple.nke.applicationfirewall (2.1.14) <7 6 5 4 3 1>

21 2 0x2e873000 0x3000 0x2000 com.apple.kext.AppleMatch (1.0.0d1) <4 1>

22 0 0x2e8a3000 0x5000 0x4000 com.apple.security.quarantine (0) <21 7 6 5 4 2 1>

23 0 0x2e911000 0x8000 0x7000 com.apple.security.sandbox (1) <21 7 6 5 4 2 1>

24 0 0x2e89d000 0x3000 0x2000 com.apple.security.TMSafetyNet (6) <7 6 5 4 2 1>

25 0 0x2e8a0000 0x3000 0x2000 com.apple.driver.AppleAPIC (1.4) <4 3>

26 0 0x2e90d000 0x4000 0x3000 com.apple.driver.AppleSMBIOS (1.7) <7 4 3>

27 2 0x2e9c4000 0x3c000 0x3b000 com.apple.iokit.IOHIDFamily (1.6.6) <7 6 5 4 3 1>

28 0 0x2e7e0000 0x4000 0x3000 com.apple.driver.AppleACPIButtons (1.3.5) <27 15 14 7 6 5 4 3 1>

29 0 0x2e7d5000 0x5000 0x4000 com.apple.driver.AppleRTC (9.9) <14 5 4 3 1>

30 1 0x2e7da000 0x3000 0x2000 com.apple.driver.AppleEFIRuntime (1.4.0) <7 6 5 4 3>

31 0 0x3448d000 0x4000 0x3000 org.netkas.fakesmc (2) <14 7 4 3>

32 3 0x344b4000 0xd000 0xc000 com.apple.iokit.IOATAFamily (2.5.1) <5 4 3 1>

33 0 0x344a4000 0x7000 0x6000 com.nvidia.driver.AppleNForceATA (1.0.3) <32 13 10 7 5 4 3 1>

34 6 0x3460d000 0x2f000 0x2e000 com.apple.iokit.IOUSBFamily (3.8.5) <13 7 5 4 3 1>

35 0 0x34523000 0xc000 0xb000 com.apple.driver.AppleUSBOHCI (3.7.5) <34 13 5 4 3 1>

36 0 0x2e7a5000 0x2000 0x1000 net.osrom.kext.Disabler (1.0.1) <4 3>

37 0 0x34491000 0x6000 0x5000 com.apple.driver.AppleEFINVRAM (1.4.0) <30 7 5 4 3>

38 0 0x3450a000 0x14000 0x13000 com.apple.driver.AppleUSBEHCI (3.7.5) <34 13 7 5 4 3 1>

39 0 0x2e7bd000 0x2000 0x1000 com.apple.iokit.IOUSBUserClient (3.8.5) <34 7 5 4 3 1>

40 0 0x3454a000 0xf000 0xe000 com.apple.driver.AppleUSBHub (3.8.4) <34 5 4 3 1>

41 3 0x3469e000 0x1a000 0x19000 com.apple.iokit.IOSCSIArchitectureModelFamily (2.6.8) <5 4 3 1>

42 0 0x3451e000 0x5000 0x4000 com.apple.iokit.IOATAPIProtocolTransport (2.5.1) <41 32 5 4 3 1>

44 0 0x34560000 0x6000 0x5000 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib (1.0.0d1) <6 4 3 2 1>

45 0 0x34671000 0x5000 0x4000 com.apple.BootCache (31.1) <7 6 5 4 3 1>

46 3 0x3468d000 0x8000 0x7000 com.apple.iokit.IOCDStorageFamily (1.6.1) <18 5 4 3 1>

47 2 0x34695000 0x6000 0x5000 com.apple.iokit.IODVDStorageFamily (1.6) <46 18 5 4 3 1>

48 1 0x34794000 0x5000 0x4000 com.apple.iokit.IOBDStorageFamily (1.6) <47 46 18 5 4 3 1>

49 0 0x347d9000 0x17000 0x16000 com.apple.iokit.IOSCSIMultimediaCommandsDevice (2.6.8) <48 47 46 41 18 5 4 3 1>

51 0 0x347c3000 0x7000 0x6000 com.apple.iokit.SCSITaskUserClient (2.6.8) <41 18 5 4 3 1>

52 0 0x344b0000 0x4000 0x3000 com.apple.driver.AppleUSBComposite (3.7.5) <34 4 3 1>

53 0 0x3482f000 0xe000 0xd000 com.apple.iokit.IOATABlockStorage (2.6.0) <32 18 5 4 3 1>

54 0 0x347a8000 0x6000 0x5000 com.apple.iokit.IOUSBHIDDriver (3.8.4) <34 27 5 4 3 1>

55 0 0x3466d000 0x3000 0x2000 com.apple.driver.XsanFilter (402.1) <18 5 4 3 1>

56 6 0x34dea000 0x22000 0x21000 com.apple.iokit.IOGraphicsFamily (2.2.1) <13 7 5 4 3>

57 1 0x34fd9000 0x12e000 0x12d000 com.apple.kext.ATISupport (6.3.6) <56 14 13 7 5 4 3 1>

58 0 0x34e84000 0x2a000 0x29000 com.apple.kext.ATI2600Controller (6.3.6) <57 56 14 13 5 4 3 1>

60 2 0x34b01000 0xa000 0x9000 com.apple.driver.AppleSMC (3.1.0d5) <14 7 5 4 3>

61 1 0x34baa000 0xc000 0xb000 com.apple.driver.IOPlatformPluginFamily (4.7.0a1) <14 7 6 5 4 3>

62 0 0x34bc1000 0x10000 0xf000 com.apple.driver.ACPI_SMC_PlatformPlugin (4.7.0a1) <61 60 14 13 7 6 5 4 3>

63 1 0x2e3de000 0xd000 0xc000 com.apple.iokit.IONDRVSupport (2.2.1) <56 13 7 5 4 3>

66 2 0x2e3c3000 0x9000 0x8000 com.apple.iokit.IOSerialFamily (10.0.3) <7 6 5 4 3 1>

67 1 0x2e448000 0x9000 0x8000 com.apple.driver.Apple16X50Serial (3.0) <66 13 5 4 3>

68 0 0x2e3a1000 0x2000 0x1000 com.apple.driver.Apple16X50ACPI (3.0) <67 14 4 3>

69 0 0x34c73000 0x2c000 0x2b000 com.apple.iokit.AppleProfileFamily (41) <13 7 6 5 4 3 1>

70 1 0x2e99d000 0x17000 0x16000 com.apple.iokit.IONetworkingFamily (1.10) <7 6 5 4 3 1>

71 0 0x2e433000 0x6000 0x5000 com.apple.driver.AppleRTL8139Ethernet (1.5.3) <70 13 5 4 3 1>

72 1 0x2e3bc000 0x4000 0x3000 com.apple.kext.OSvKernDSPLib (1.3) <5 4>

73 2 0x2e46c000 0x18000 0x17000 com.apple.iokit.IOAudioFamily (1.8.3fc2) <72 5 4 3 1>

74 0 0x34bd1000 0x1e000 0x1d000 org.voodoo.driver.VoodooHDA (2.8.0) <73 13 7 5 4 3>

75 0 0x2e43e000 0x4000 0x3000 com.apple.driver.AudioIPCDriver (1.1.6) <73 5 4 3 1>

76 0 0x35d15000 0x247000 0x246000 com.apple.ATIRadeonX2000 (6.3.6) <63 56 13 7 6 5 4 3 1>

79 0 0x2e42d000 0x6000 0x5000 com.apple.Dont_Steal_Mac_OS_X (7.0.0) <60 7 4 3 1>

80 0 0x2e4ae000 0x7000 0x6000 com.apple.driver.AppleMCCSControl (1.0.20) <56 13 7 5 4 3 1>

81 0 0x34762000 0x9000 0x8000 com.apple.iokit.IOBluetoothSerialManager (2.4.5f3) <66 7 5 4 3 1>

82 0 0x2e442000 0x5000 0x4000 com.apple.driver.AppleUpstreamUserClient (3.5.7) <56 14 13 7 5 4 3 1>

83 0 0x34ae5000 0xb000 0xa000 com.apple.iokit.IOSurface (74.2) <7 5 4 3 1>

85 0 0x34dcd000 0xa000 0x9000 com.apple.filesystems.autofs (2.1.0) <7 6 5 4 3 1>

86 4 0x355ad000 0x60000 0x5f000 com.apple.filesystems.ntfs (3.4) <7

[artur-pt]

hello

try to inject it by chameleon

AtiConfig=framebuffer

good hack