ATI Graphics

[Phantomhive]

hi try the redwood family

are u sure that personality u are using is right, may also try anothers, in boot AtiConfig=

is only in ML that problems ?

good hack

 

Hey Artur!

It's been a long time.

I'm back from UK and I gave 10.8 a try again. Updated it to 10.8.2 and (somehow?) there was an info.plist in ATI5000Controller kext, so I added my device id there. Then in AMDAccelerator kext I added my device id under Juniper(yes, my HD5670 has Juniper core) and voila! It works perfectly.

(first I tried add under Evergreen. it worked, had QE/CI but when i wanted to do something (like open Disk Utility or Safari) the system crashed totally(not a single kernel panic. all frozen).

Now I'm using the system for the 2nd day and it's alright.

However I'm not satisfied with the performance.

I think that my card isn't running on the max gpu core/memory frequency. What do you think?

Is there any way to check this or what benchmark should I run or should I set the cores manually in the card's bios?

I know that the Radeon cards can set their gpu core and memory frequency down to 157/300 from 775/900 (in my case) and I'm afraid my card's running on 157/300. When I check the heat of my gpu it's cooler then in windows.

Any tip/advice would be greatly appreciated.

Cheers,

[daksi99]

hello

use smbios

macpro3,1

or imac8,1

must work with that ati card

good hack

Don,t work Artur but thank you

[artur-pt]

Hey Artur!

It's been a long time.

I'm back from UK and I gave 10.8 a try again. Updated it to 10.8.2 and (somehow?) there was an info.plist in ATI5000Controller kext, so I added my device id there. Then in AMDAccelerator kext I added my device id under Juniper(yes, my HD5670 has Juniper core) and voila! It works perfectly.

(first I tried add under Evergreen. it worked, had QE/CI but when i wanted to do something (like open Disk Utility or Safari) the system crashed totally(not a single kernel panic. all frozen).

Now I'm using the system for the 2nd day and it's alright.

However I'm not satisfied with the performance.

I think that my card isn't running on the max gpu core/memory frequency. What do you think?

Is there any way to check this or what benchmark should I run or should I set the cores manually in the card's bios?

I know that the Radeon cards can set their gpu core and memory frequency down to 157/300 from 775/900 (in my case) and I'm afraid my card's running on 157/300. When I check the heat of my gpu it's cooler then in windows.

Any tip/advice would be greatly appreciated.

Cheers,

 

hello

what smbios are u using ?

must see if applegraphicspowermanagement

are well apply

perhaps using a smbios for a nvidia gpu, and if so must use a legacy_agpm.kext

to insert the right parameters in applegraphicspowermanagement

good hack

[artur-pt]

Don,t work Artur but thank you

 

hello

that card u have, is used in that mac models

about the framebuffer problem that is insert in boot

to any ati card work, like i said in topic

must be loaded

atixxxxcontroller

atiradeonx000x

atisuport

and if insert in boot AiConfig=framebuffer

it load atiframebuffer

must post what kext are loaded

use in terminal

kextstat

and see about ati kext are load

good hack

[Phantomhive]

hello

what smbios are u using ?

must see if applegraphicspowermanagement

are well apply

perhaps using a smbios for a nvidia gpu, and if so must use a legacy_agpm.kext

to insert the right parameters in applegraphicspowermanagement

good hack

Hey

I'm using iMac 11,2

Model Name: iMac

Model Identifier: iMac11,2

Processor Name: Intel Core i3

Processor Speed: 3.29 GHz

Number of Processors: 1

Total Number of Cores: 2

L2 Cache (per Core): 256 KB

L3 Cache: 3 MB

Memory: 4 GB

Boot ROM Version: IM112.0057.B00

SMC Version (system): 1.30f3

wikipedia said iMac 11,2 and iMac 11,3 are using (optionally) HD5670 but my CPU is socket 1155 and these iMacs are using socket 1156 CPUs.

Is this a problem or no worries?

In System Information - Extensions

AppleGraphicsControl:

Version: 3.2.11

Last Modified: 6/25/12 8:10 AM

Get Info String: 3.2.11, Copyright 2008-2012 Apple Inc. All rights reserved.

Kind: Intel

Architectures: i386, x86_64

64-Bit (Intel): Yes

Location: /System/Library/Extensions/AppleGraphicsControl.kext

Kext Version: 3.2.11

Load Address: 0xffffff7f80ebf000

Valid: Yes

Authentic: Yes

Dependencies: Satisfied

and

Version: 100.12.69

Last Modified: 6/25/12 8:02 AM

Get Info String: 100.12.69, Copyright 2011 Apple Inc. All rights reserved.

Kind: Intel

Architectures: x86_64

64-Bit (Intel): Yes

Location: /System/Library/Extensions/AppleGraphicsPowerManagement.kext

Kext Version: 100.12.69

Load Address: 0xffffff7f81021000

Valid: Yes

Authentic: Yes

Dependencies: Satisfied

I didn't touch the kexts mentioned above. What do I need to change?

and what does legacy_agpm.kext doing?

Thank you,

Chris

[artur-pt]

hello

try to use

imac11,3

and see if any difference

 

 

good hack

[Phantomhive]

Index Refs Address Size Wired Name (Version)

1 65 0xffffff806b83b000 0x686c 0x686c com.apple.kpi.bsd (12.2.0)

2 6 0xffffff800b8fb800 0x46c 0x46c com.apple.kpi.dsep (12.2.0)

3 83 0xffffff806b857000 0x1b7ec 0x1b7ec com.apple.kpi.iokit (12.2.0)

4 88 0xffffff806b873000 0x99f8 0x99f8 com.apple.kpi.libkern (12.2.0)

5 78 0xffffff800b8ff000 0x88c 0x88c com.apple.kpi.mach (12.2.0)

6 35 0xffffff806b87d000 0x500c 0x500c com.apple.kpi.private (12.2.0)

7 52 0xffffff806b842000 0x23cc 0x23cc com.apple.kpi.unsupported (12.2.0)

8 0 0xffffff7f80741000 0x41000 0x41000 com.apple.kec.corecrypto (1.0) <7 6 5 4 3 1>

9 20 0xffffff7f80782000 0x7000 0x7000 com.apple.iokit.IOACPIFamily (1.4) <7 6 4 3>

10 26 0xffffff7f80789000 0x24000 0x24000 com.apple.iokit.IOPCIFamily (2.7.1) <7 6 5 4 3>

11 1 0xffffff7f807ad000 0x57000 0x57000 com.apple.driver.AppleACPIPlatform (1.6) <10 9 7 6 5 4 3 1>

12 0 0xffffff7f80804000 0x29000 0x29000 com.apple.driver.AppleIntelCPUPowerManagement (196.0.0) <7 6 5 4 3 1>

13 1 0xffffff7f8082e000 0xc000 0xc000 com.apple.driver.AppleKeyStore (28.21) <7 6 5 4 3 1>

14 8 0xffffff7f8083a000 0x25000 0x25000 com.apple.iokit.IOStorageFamily (1.8) <7 6 5 4 3 1>

15 0 0xffffff7f8085f000 0x18000 0x18000 com.apple.driver.DiskImages (344) <14 7 6 5 4 3 1>

16 2 0xffffff7f80877000 0x2b000 0x2b000 com.apple.iokit.IONetworkingFamily (3.0) <7 6 5 4 3 1>

17 0 0xffffff7f808a2000 0x7000 0x7000 com.apple.iokit.IOUserEthernet (1.0.0d1) <16 6 5 4 3 1>

18 0 0xffffff7f808ac000 0x8000 0x8000 com.apple.nke.applicationfirewall (4.0.39) <7 6 5 4 3 1>

19 2 0xffffff7f808b6000 0x4000 0x4000 com.apple.kext.AppleMatch (1.0.0d1) <4 1>

20 1 0xffffff7f808ba000 0x11000 0x11000 com.apple.security.sandbox (220) <19 7 6 5 4 3 2 1>

21 0 0xffffff7f808cb000 0x6000 0x6000 com.apple.security.quarantine (2) <20 19 7 6 5 4 2 1>

22 0 0xffffff7f808d2000 0x3000 0x3000 com.apple.security.TMSafetyNet (7) <7 6 5 4 2 1>

23 0 0xffffff7f808d5000 0x3000 0x3000 com.apple.driver.AppleIntelCPUPowerManagementClient (196.0.0) <7 6 5 4 3 1>

24 0 0xffffff7f808d9000 0x3000 0x3000 com.apple.driver.AppleAPIC (1.6) <4 3>

25 0 0xffffff7f808dd000 0x4000 0x4000 com.apple.driver.AppleSMBIOS (1.9) <7 4 3>

26 0 0xffffff7f808e2000 0x3000 0x3000 com.apple.driver.AppleHPET (1.7) <9 7 5 4 3>

27 0 0xffffff7f808e6000 0x8000 0x8000 com.apple.driver.AppleRTC (1.5) <9 5 4 3 1>

28 1 0xffffff7f808f0000 0xe000 0xe000 com.apple.iokit.IOSerialFamily (10.0.6) <7 6 5 4 3 1>

31 2 0xffffff7f8090e000 0x6c000 0x6c000 com.apple.iokit.IOHIDFamily (1.8.0) <13 7 6 5 4 3 2 1>

32 0 0xffffff7f8097a000 0x4000 0x4000 com.apple.driver.AppleACPIButtons (1.6) <31 11 9 7 6 5 4 3 1>

33 1 0xffffff7f80980000 0x4000 0x4000 com.apple.driver.AppleEFIRuntime (1.6.1) <7 6 5 4 3>

34 9 0xffffff7f80984000 0x56000 0x56000 com.apple.iokit.IOUSBFamily (5.4.0) <10 7 5 4 3 1>

35 0 0xffffff7f809da000 0x18000 0x18000 com.apple.driver.AppleUSBEHCI (5.4.0) <34 10 7 5 4 3 1>

36 3 0xffffff7f809fa000 0x16000 0x16000 com.apple.iokit.IOAHCIFamily (2.2.1) <5 4 3 1>

37 0 0xffffff7f80a10000 0x19000 0x19000 com.apple.driver.AppleAHCIPort (2.4.1) <36 10 5 4 3 1>

38 0 0xffffff7f80a30000 0x3000 0x3000 com.apple.driver.AppleSMBusPCI (1.0.10d0) <10 5 4 3>

39 0 0xffffff7f80a33000 0xa000 0xa000 org.netkas.FakeSMC (4.2.0) <9 7 5 4 3>

40 0 0xffffff7f80a3d000 0x3000 0x3000 com.apple.iokit.IOUSBUserClient (5.2.5) <34 7 5 4 3 1>

41 1 0xffffff7f80a40000 0x3000 0x3000 com.apple.iokit.IOSMBusFamily (1.1) <5 4 3>

42 1 0xffffff7f80a43000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.10d0) <41 10 9 5 4 3>

43 0 0xffffff7f80a51000 0x7000 0x7000 com.apple.driver.AppleEFINVRAM (1.6.1) <33 7 6 5 4 3>

44 0 0xffffff7f80a5a000 0x33000 0x33000 com.apple.driver.AppleRTL8169Ethernet (1.1.4a5) <16 10 5 4 3 1>

45 0 0xffffff7f80a8d000 0x15000 0x15000 com.apple.driver.AppleUSBHub (5.2.5) <34 5 4 3 1>

46 0 0xffffff7f809f2000 0x3000 0x3000 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless (1.0.0d1) <7 6 4 3 2 1>

47 0 0xffffff7f809f5000 0x4000 0x4000 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib (1.0.0d1) <6 4 3 2 1>

48 0 0xffffff7f80aa2000 0x9000 0x9000 com.apple.BootCache (34) <7 6 5 4 3 1>

51 1 0xffffff7f80aab000 0x6000 0x6000 com.apple.driver.AppleUSBComposite (5.2.5) <34 4 3 1>

52 0 0xffffff7f80ab1000 0x5000 0x5000 com.apple.driver.AppleUSBMergeNub (5.2.5) <51 34 4 3 1>

53 0 0xffffff7f80ab6000 0x8000 0x8000 com.apple.iokit.IOUSBHIDDriver (5.2.5) <34 31 5 4 3 1>

54 0 0xffffff7f80abe000 0x16000 0x16000 com.apple.iokit.IOAHCIBlockStorage (2.2.2) <36 14 6 5 4 3 1>

55 3 0xffffff7f80ad4000 0x2a000 0x2a000 com.apple.iokit.IOSCSIArchitectureModelFamily (3.5.1) <5 4 3 1>

56 0 0xffffff7f80afe000 0xc000 0xc000 com.apple.iokit.IOAHCISerialATAPI (2.5.0) <55 36 5 4 3 1>

57 0 0xffffff7f80a2c000 0x3000 0x3000 com.apple.driver.XsanFilter (404) <14 5 4 3 1>

58 2 0xffffff7f80b0a000 0x7000 0x7000 com.apple.kext.OSvKernDSPLib (1.6) <5 4>

59 4 0xffffff7f80b11000 0x2e000 0x2e000 com.apple.iokit.IOAudioFamily (1.8.9fc10) <58 5 4 3 1>

60 0 0xffffff7f80b3f000 0x40000 0x40000 com.apple.driver.AppleUSBAudio (2.9.0f6) <59 34 5 4 3>

61 3 0xffffff7f80b7f000 0xd000 0xd000 com.apple.iokit.IOCDStorageFamily (1.7.1) <14 5 4 3 1>

62 2 0xffffff7f80b8c000 0xb000 0xb000 com.apple.iokit.IODVDStorageFamily (1.7.1) <61 14 5 4 3 1>

63 1 0xffffff7f80b97000 0xa000 0xa000 com.apple.iokit.IOBDStorageFamily (1.7) <62 61 14 5 4 3 1>

64 0 0xffffff7f80ba1000 0x1a000 0x1a000 com.apple.iokit.IOSCSIMultimediaCommandsDevice (3.5.1) <63 62 61 55 14 5 4 3 1>

65 0 0xffffff7f80bbb000 0x7000 0x7000 com.apple.iokit.SCSITaskUserClient (3.5.1) <55 14 5 4 3 1>

66 2 0xffffff7f80bc2000 0x5000 0x5000 com.apple.kext.triggers (1.0) <7 6 5 4 3 1>

67 0 0xffffff7f80bc7000 0x9000 0x9000 com.apple.filesystems.autofs (3.0) <66 7 6 5 4 3 1>

68 0 0xffffff7f80bd0000 0xa000 0xa000 com.apple.iokit.IOBluetoothSerialManager (4.0.9f33) <28 7 5 4 3 1>

69 15 0xffffff7f80bda000 0x37000 0x37000 com.apple.iokit.IOGraphicsFamily (2.3.5) <10 7 5 4 3>

70 0 0xffffff7f80c11000 0x2e000 0x2e000 com.apple.driver.AppleIntelSNBGraphicsFB (8.0.0) <69 10 9 7 6 5 4 3 1>

71 2 0xffffff7f80c3f000 0x1d8000 0x1d8000 com.apple.kext.AMDSupport (8.0.0) <69 10 9 7 5 4 3 1>

72 0 0xffffff7f80e17000 0x41000 0x41000 com.apple.kext.AMD5000Controller (8.0.0) <71 69 10 9 5 4 3 1>

73 5 0xffffff7f80e58000 0x8000 0x8000 com.apple.driver.IOPlatformPluginFamily (5.2.0d16) <9 7 6 5 4 3>

74 1 0xffffff7f80e60000 0x12000 0x12000 com.apple.driver.IOPlatformPluginLegacy (1.0.0) <73 9 7 6 5 4 3>

75 2 0xffffff7f80e72000 0xc000 0xc000 com.apple.driver.AppleSMC (3.1.4d2) <9 7 5 4 3>

76 0 0xffffff7f80e7e000 0x10000 0x10000 com.apple.driver.ACPI_SMC_PlatformPlugin (1.0.0) <75 74 73 10 9 7 6 5 4 3>

77 6 0xffffff7f80e8e000 0x12000 0x12000 com.apple.iokit.IONDRVSupport (2.3.5) <69 10 7 5 4 3>

78 1 0xffffff7f80ea0000 0x3000 0x3000 com.apple.driver.AppleGraphicsControl (3.2.11) <77 69 10 9 7 5 4 3 1>

79 0 0xffffff7f80ea3000 0xc000 0xc000 com.apple.driver.ApplePolicyControl (3.2.11) <78 77 69 10 9 7 5 4 3 1>

80 0 0xffffff7f80eaf000 0x3000 0x3000 com.apple.driver.AppleLPC (1.6.0) <73 10 5 4 3>

81 2 0xffffff7f80eb2000 0xc000 0xc000 com.apple.iokit.IOHDAFamily (2.2.0f3) <5 4 3 1>

82 1 0xffffff7f80ebe000 0x14000 0x14000 com.apple.driver.AppleHDAController (2.2.0f3) <81 69 10 6 5 4 3 1>

83 0 0xffffff7f80ed2000 0x5000 0x5000 com.apple.driver.AudioAUUC (1.60) <69 59 10 9 7 5 4 3 1>

84 0 0xffffff7f80ed7000 0x25000 0x25000 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport (4.0.9f33) <34 10 9 7 5 4 3 1>

85 0 0xffffff7f80efc000 0x3000 0x3000 com.apple.driver.AppleSMCPDRC (1.0.0) <73 10 6 4 3>

86 0 0xffffff7f80eff000 0x5000 0x5000 com.apple.Dont_Steal_Mac_OS_X (7.0.0) <75 7 4 3 1>

87 1 0xffffff7f80f04000 0xaa000 0xaa000 com.apple.driver.DspFuncLib (2.2.0f3) <59 58 5 4 3 1>

88 0 0xffffff7f80fae000 0x7a000 0x7a000 com.apple.driver.AppleHDA (2.2.0f3) <87 82 81 77 69 59 6 5 4 3 1>

89 1 0xffffff7f81028000 0x47000 0x47000 com.apple.iokit.IOAcceleratorFamily (19.0.26) <77 69 10 7 5 4 3 1>

90 0 0xffffff7f8106f000 0x3ce000 0x3ce000 com.apple.AMDRadeonAccelerator (1.0.0) <89 77 69 10 7 5 4 3 1>

91 0 0xffffff7f8143d000 0x10000 0x10000 com.apple.driver.AGPM (100.12.69) <77 73 69 10 5 4 3>

93 0 0xffffff7f81456000 0xa0000 0xa0000 com.apple.iokit.IOBluetoothFamily (4.0.9f33) <34 7 5 4 3 1>

95 0 0xffffff7f814f8000 0x13000 0x13000 com.apple.kext.AMDFramebuffer (8.0.0) <71 69 10 9 7 5 4 3 1>

96 0 0xffffff7f8150b000 0x11000 0x11000 com.apple.iokit.IOSurface (86.0.3) <7 5 4 3 1>

97 0 0xffffff7f8151c000 0xc000 0xc000 com.apple.driver.AppleMCCSControl (1.0.33) <69 42 10 9 7 5 4 3 1>

98 0 0xffffff7f81528000 0x5000 0x5000 com.apple.driver.AppleUpstreamUserClient (3.5.10) <69 10 9 7 5 4 3 1>

99 0 0xffffff7f8152d000 0x5000 0x5000 com.apple.driver.AppleHWSensor (1.9.5d0) <5 4 3>

100 1 0xffffff7f81532000 0x56000 0x56000 com.apple.filesystems.ntfs (3.10) <7 6 5 4 1>

101 0 0xffffff7f81588000 0x33000 0x33000 com.apple.filesystems.smbfs (1.8) <66 7 6 5 4 3 1>

My kextstat.

Here it does not mention AGPM.kext being loaded (but in system info-extensions it says it's satisfied).

do i need to patch it or replace it?

(imac 11,3 smbios)

thanks

edit.: oh, god! the hidden file tricked me.

i moved into AGPM.kext with terminal and i found the bloody hidden info.plist

I looked for iMac 11,2 and iMac 11,3 and this is all i found

iMac11,2

GFX0

control-id

17

LogControl

0

iMac11,3

GFX0

control-id

17

LogControl

0

this isn't seem to be a lot of information.

any idea what should I put here or a tutorial?

[artur-pt]

hi

what are u doing ?

the agpm is load

91 0 0xffffff7f8143d000 0x10000 0x10000 com.apple.driver.AGPM (100.12.69) <77 73 69 10 5 4 3>

only thing i tell u to try is

use imac11,3

in smbios.plist file

use chameleon wizard to generate smbios file

good hack

[desi-g]

my Raw data

00,FF,FF,FF,FF,FF,FF,00,36,7F,25,00,00,00,00,00,04,13,01,03,80,22,13,78,F2,CE,50,A3,57,4C,99,26,

0F,50,54,00,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,1A,36,80,9A,70,38,22,40,19,33,

5B,00,54,BE,10,00,00,00,1A,36,80,C4,71,38,58,40,4B,96,ED,00,54,BE,10,00,00,00,00,00,00,00,00,00,

00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,0A

done everything i am stuck at this raw data part

where do i copy paste this raw data ,which line do i need to convert this raw data into something else than copy paste it

thanks

[artur-pt]

hi

have u read this

http://www.insanelymac.com/forum/index.php?showtopic=208410

After obtaining this information you should keep a file with the extension *. txt, then proceed on Mac OS X to edit another file system located in

/ System/Library/Displays/Overrides/DisplayVendorID-756e6b6e/DisplayProductID-717

to do this make a copy of it to the desk, and changed its name to DisplayProductID-717.plist, introducing the Raw Data obtained by the method described above, an example of the original file and the file already containing the Forced EDID Raw Data

first u must know what file is loaded for u display, mine is that..

then look for the picture and u will see

where u gonna insert u raw data

good hack

[Phantomhive]

hi

what are u doing ?

the agpm is load

91 0 0xffffff7f8143d000 0x10000 0x10000 com.apple.driver.AGPM (100.12.69) <77 73 69 10 5 4 3>

only thing i tell u to try is

use imac11,3

in smbios.plist file

use chameleon wizard to generate smbios file

good hack

 

hi

already tried all imac smbios settings (11,1 and 11,2 and 11,3). no difference. same performance.

i use chameleon wizard always

lately i found out myself the agpm is loaded but when i'm booting in a line it says it has found an unknown device or something like that meaning there's wrong with my agpm kext.

also my console is writing this sometimes

9/27/12 2:34:42.000 AM kernel[0]: Couldn't alloc class "AMDJuniperGraphicsAccelerator"

9/27/12 10:42:07.000 AM kernel[0]: Kext com.apple.iokit.IOAcceleratorFamily - library kext com.apple.iokit.IOGraphicsFamily not found.

i use a premade dsdt for my motherboard and i can't find any vga related in my dsdt.

do i need to define my vga in dsdt?

[artur-pt]

hi

man i answer hundred of post , only say again

update in u profile, u signature with u hardware is easy for us to see what u are speaking

i don't remember witch one hardware

good hack

[Phantomhive]

hi

man i answer hundred of post , only say again

update in u profile, u signature with u hardware is easy for us to see what u are speaking

i don't remember witch one hardware

good hack

 

nah, sorry man. you're totally right.

i've updated my signature with all necessary information.

let me know if you need to know anything else.

[desi-g]

hi

have u read this

http://www.insanelymac.com/forum/index.php?showtopic=208410

After obtaining this information you should keep a file with the extension *. txt, then proceed on Mac OS X to edit another file system located in

/ System/Library/Displays/Overrides/DisplayVendorID-756e6b6e/DisplayProductID-717

to do this make a copy of it to the desk, and changed its name to DisplayProductID-717.plist, introducing the Raw Data obtained by the method described above, an example of the original file and the file already containing the Forced EDID Raw Data

first u must know what file is loaded for u display, mine is that..

then look for the picture and u will see

where u gonna insert u raw data

good hack

 

Thanks man i got it everything is done , but after checking the graphics enabler and ati config @ Chameleon Wizard, which one to select from the drop down list Alopias, Aloutta etc etc , there are so many

My Graphics card : Madison [Radeon HD 5000M Series], Dev ID : 68C1 , Ven ID : 1002, Ati Mobility Radeon

[artur-pt]

hello

try

Eulemur

Hoolock

good hack

[desi-g]

i have selected Hoolock , repaired permissions , restart

now my main display goes black and when i connect secondary display it shows blue

any flags to boot up than change the hoolock to any other ?

thanks

ok the above have been solved , booted in safe mode and disable graphics enabler .(-v -x)

one more thing i would like to know , out of all this four kext files , which one should i edit and add my own venid+devid (if its not present)

ATI5000Controller.kext

ATIFramebuffer.kext

ATIRadeonX3000.kext

ATISupport.kext

Thanks

[artur-pt]

hi

only ati5000controller

and atiradeon3000x

good hack

[desi-g]

i have done everything as mentioned , after reboot , apple logo spins and main screen (laptop screen) turns black , then i connect secondary display QE/CI works , graphics card is responding properly, the issue here is that the main display stays black while the secondary display works

whats the solution ? thanks

[Phantomhive]

i have done everything as mentioned , after reboot , apple logo spins and main screen (laptop screen) turns black , then i connect secondary display QE/CI works , graphics card is responding properly, the issue here is that the main display stays black while the secondary display works

whats the solution ? thanks

 

if you go to system preferences - displays try look for an option to "mirror" the screen which means you see exactly the same on both screens.

give it a try.

and have you tried editing your EDID information?

[desi-g]

if you go to system preferences - displays try look for an option to "mirror" the screen which means you see exactly the same on both screens.

give it a try.

and have you tried editing your EDID information?

 

Yes i already edited the EDID , i will try the mirror thing , thanks

[desi-g]

the mirror thing didn't work for me, after many tries i finally got it working(Hoolock) but sometimes the display changes to this ( http://i.imgur.com/CJ12A.jpg ) and sometimes its crystal clear , why is that , any soln ? do we need to use some additional kernel flags ?

Thanks

[artur-pt]

hello

i don't see nothing special in the image u post

i think is good ?

good hack

[desi-g]

hello

i don't see nothing special in the image u post

i think is good ?

good hack

 

just booted up win7 and i had a look at that screenshot and its clear, but for real the display is like very grainy and text have broken line etc

thanks for your help

[daksi99]

Hi Arthur, i change my card with new aty hd3650 vram 256mb.What aticontroller must by change?I am only 3mb vram after update to 10.6.8 .Card is Megalodon RV635 family.Smbios is Mac pro 3.1.Thanks end sorry for my english.

[artur-pt]

hello

i'm afraid is not supported

try the 2600 and 3800

good hack