[Guide] Hardware Encoder / Hardware Decoder / Video Processing / HEVC Support / Intel Quick Sync

[juanvascas]

Hmmm I am not sure then what it is, I can boot with my config.plist and Bios.aml, but I can’t with the dsdt.aml nor the Bios.aml with your config.plist

I can boot with your coffe lake mobos 300 efi folder, does it work if I get a new Send Me with it?

[MaLd0n]

[ref]juanvascas[/ref], yes

[juanvascas]

Extracted using the notebooks skylake+ efi folder.

Send me Juans-MacBook.zip

[MaLd0n]

[ref]juanvascas[/ref], DSDT.aml.zip

 

enable ECDV to EC patch

[juanvascas]

Thanks man! It seems that my laptop is running really smooth now! I will get the voodooi2c patch and it it’s reaaady

[MaLd0n]

[ref]juanvascas[/ref], extract new sendme

[juanvascas]

Here you go sir!

Send me Juans-MacBook.zip

[MaLd0n]

[ref]juanvascas[/ref], replace two files

Arquivo Comprimido.zip

[juanvascas]

I get this according to the kernel log: VodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x33 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode.

Send me Juans-MacBook.zip

[MaLd0n]

[ref]juanvascas[/ref], is full load

https://i.imgur.com/p5thj6K.png' alt='IMGUR>'>

[juanvascas]

Oh that's it with VoodooI2C then, thanks!

Last thing I don't have working is proper audio, I want to use vanilla apple had + appleALC and I should use layout id = 13 according to AppleALC resources (ALC3246). If I inject 1,3 or any other with clover I get no audio but I get dynamic cpu power management while if I use layout 13 I have audio but cpu is always at 3.4GHz.

[MaLd0n]

[ref]juanvascas[/ref], strange

try last version

[juanvascas]

I did and same thing happens, I do not think it is either the DSDT not the config plist it might be because I someday replaced the AppleHDA with a non vanilla one or some other problem because it happened to me also with my previos ssdts and config so I will try to reinstall macOS Mojave and see what happens.

[juanvascas]

I got it fixed! And I was right it had nothing to do with your work. For anyone with the same issue, I found out that it was caused by the audio, ALC256 is known to have static noise issue which should be fixed in order to make the cpu work properly! I was using a solution that onemanosx pointed me to, but it was not loading at startup which was weird. I did a clean install and voila, working perfectly now! Perfectly working Hackintosh now

[MaLd0n]

[ref]juanvascas[/ref],

[sosoluis]

Hello Master, I would be very pleased if you can give me orientation about this: I have a Mojave (vanilla by Shane) ryzentosh (ryzen 2200G with Vega iGPU) on a MSI A320M Pro-M2. If I inject ATI, a loading cursor appears during loading, and print over itself (not clearing its buffer) eternally. Without injection, I have no acceleration.

Thanks in advance.

Send me iMac.zip

[MaLd0n]

[ref]sosoluis[/ref], vega have a full native support, the best is use iMacPro1,1 smbios

[artnr28]

hi, whats the name of this application:( i cant remeber

[MaLd0n]

[ref]artnr28[/ref], VideoProc.app

[artnr28]

hi again long time no see , so ...my intel graphics is not working, when i go to bios to switch it ON, i cant even switch my computer back to life, so i have to leave it on AUTo in order to use the computer, i tried to convert 8gb MKV file last night using handbrake and it took 5hr .

[MaLd0n]

[ref]artnr28[/ref], what happens if u enable igpu?

[artnr28]

i cant start the computer, just a big bunch of lines with numbers and letters on the screen, and then nothing happens

[MaLd0n]

[ref]artnr28[/ref], extract one send_me

[artnr28]

Send me Arturs-iMac.zip

 

here is my Send Me.

[MaLd0n]

[ref]artnr28[/ref], EFI.zip