Hackintosh Guide - High Sierra / Mojave / Catalina / BigSur / Monterey on X299 with Clover Bootloader

[chuyin24]

use this folder

CLOVER.zip

is still freezing and does not come the file MaLd0n SERIE 10,20,30.txt or what file should I put in System DSDT?

[MaLd0n]

freeze where?

[chuyin24]

freeze where?

when I'm moving or copying folders it freezes and I have to turn it off to be able to move it back

[MaLd0n]

use a fresh install, install clover and replace with my clover folder above

[chuyin24]

use a fresh install, install clover and replace with my clover folder above

It's a bit faster but it keeps getting stuck when I open a clover or when I'm coping or dragging files

Added in 16 minutes 47 seconds:

another problem, when the shutdown or restart does not start, it stays the apple and the bar but does not load

[minseung0119]

Can you patch this motherboard's dsdt file?

my motherboard is ASUS TUF X299 Mark2

BIOS Version is 1401.

attached file is my motherboard's dsdt file.

extracted by clover bootloader.

 

DSDT_ASUS_TUF_X299_MARK2_1401.zip

[portugaline]

Can you patch this motherboard's dsdt file?

my motherboard is ASUS TUF X299 Mark2

BIOS Version is 1401.

attached file is my motherboard's dsdt file.

extracted by clover bootloader.

DSDT_ASUS_TUF_X299_MARK2_1401.zip

(45.97 KiB) Downloaded 1 time

 

Hello mate, your motherboard is pretty much the same as mine, I have the x299 TUF 1, all that was need was:

change EC0 to EC

4543305f

45435f5f

Check page 4 too check what was needed for mine.

[minseung0119]

Hello mate, your motherboard is pretty much the same as mine, I have the x299 TUF 1, all that was need was:

change EC0 to EC

4543305f

45435f5f

Check page 4 too check what was needed for mine.

 

thank you for telling me. I will apply it and write the results again.

[MaLd0n]

Can you patch this motherboard's dsdt file?

my motherboard is ASUS TUF X299 Mark2

BIOS Version is 1401.

attached file is my motherboard's dsdt file.

DSDT.aml.zip

for a full patch u need post a full files

RunMe.app

Added in 2 minutes 18 seconds:

Hello mate, your motherboard is pretty much the same as mine, I have the x299 TUF 1, all that was need was:

change EC0 to EC

4543305f

45435f5f

 

if u rename a device need inject a correct usb properties, all mobos need a many many patches for work good, in x299 need a 200 or 300 changes per patch essentials, cosmetics, etc

[minseung0119]

I will report.

The DSDT for TUF X299 Mark2 produced by madl0n was not able to boot.

Stop on this screen.

And this breaks the screen.

However, DSDT for TUF X299 Mark1 was able to boot and install Mac OS X high sierra.

But I can not use Thunderbolt.

If Thunderbolt is enabled in the BIOS, booting will stop.

 

 

I've learned how to fix this. I tried to fix it by adding npci = 0x2000 or npci = 0x3000 to the boot option,

 

 

After a little more work, this screen is no longer in progress.

 

Send me yoiui-iMac-Pro.zip

 

I will attach the 'send_me' data for this system.

[MaLd0n]

remove dsdt, enable thunderbolt, boot into system and extract new SEND_ME

[minseung0119]

Post by MaLd0n » 30 Aug 2018, 08:46

remove dsdt, enable thunderbolt, boot into system and extract new SEND_ME

 

If I delete DSDT.aml of X299 Mark1, this screen will pop up and I can not boot.

 

 

I can not boot this screen up,

And I can not boot with the boot option -f -x.

After searching, I installed FakePCIID + XHCIMux but I could not boot it.

USB2.0 has keyboard and boot usb, but the result is the same.

I can not run send_me because it is not bootable.

[MaLd0n]

use only my clover folder from first post

[minseung0119]

Post by MaLd0n » 30 Aug 2018, 13:22

use only my clover folder from first post

 

I tried so.

But the result is the same.

[MaLd0n]

check voodootscsync

[minseung0119]

I've already changed the number of threads in voodooTSCSync from 19 to 15, but it's the same symptom.

The CPU is the i7 7820x (8c/16t).

[MaLd0n]

use other usb port

[minseung0119]

by MaLd0n » 30 Aug 2018, 15:34

use other usb port

 

I tried all the other USB ports.

Copy the EFI / Clover folder to an empty 30GB SSD and connect to SATA

I have loaded the boot loader, but it is the same symptom.

When booting with USB,

When booting to SATA,

Finally, after Still Waiting for root device

Kernel panic (screen shot) occurs.

 

[MaLd0n]

strange

is a usb problem

[minseung0119]

Unread post by MaLd0n » 31 Aug 2018, 07:17

strange

is a usb problem

 

Why is it booting with DSDT of X299 Mark1?

[MaLd0n]

no idea

[minseung0119]

Unread post by MaLd0n » 31 Aug 2018, 13:05

no idea

 

Do you know any other X299 motherboards that can run Thunderbolt in High sierra?

[MaLd0n]

yes, i made many. work fine.

[minseung0119]

Unread post by MaLd0n » 31 Aug 2018, 13:18

yes, i made many. work fine.

 

Can you recommend a motherboard?

[minseung0119]

DSDT_TUF_X299_Mark2.zip

 

Updated BIOS to latest (BIOS / ME)

With Thunderbolt on, I dumped DSDT by pressing F4 in Clover.

When I checked it with HxD, it came out as another file and uploaded again.