DSDT patch asus p9x79

[Max na]

Please help me get rid of my DSDT.
It can be removed with clover (although I am using opencore to boot)
Initially, I received "Kernel panic cpu 15 has no HPET assigned to it", I edited the DSDT lines associated with the processor, also through maciasl I patched some patches related to renaming the device. My system has stopped Kernel panic. But now the process hangs at

[PCI configuration begin]

I am using a Radeon RX 580 video card.
If you disable the internal network card in the BIOS settings (it is Realtek RTL8111F) and change the video card to one that is not supported by the system (I used a Radeon R7 240), then I can boot into the system and enter the desktop (of course, there is no graphical acceleration). Please help me patch my DSDT so that all PCI-E devices work normally

motherboard: asus p9x79le
DSDT.aml - I patched as best I could
DSDT_orig.aml - clover was done

DSDT.aml DSDT_orig.aml

[MaLd0n]

DSDT.aml.zip

[Max na]

now getting panic: x86_validate_topology() 16 threads but 33 registered from ...

 

https://filebin.net/yyvcwfdlc3xagj6o

[MaLd0n]

use patch APIC from clover, acpi tab

[Max na]

could you help me with the clover? it freezes even before the system starts

 

efi - https://filebin.net/m5jshr904q7u7kdv

Edited September 2, 2021 by Max na

[Max na]

yes it helped thanks.
And do not tell me how to do the same in OpenCore?

[MaLd0n]

manually

[Max na]

can you give more details? can there be a link to some material?

[Max na]

I seem to have found how to fix this. Please tell me which version of the program did you compile aml?

[MaLd0n]

https://olarila.com/files/Utils/MaciASL.app.zip

[Max na]

Please tell me why errors occur? if you open your dsdt what you threw off in the first answer to the post (I know how to fix them, but how did you compile it?)

[MaLd0n]

DSDT 02.zip

[Max na]

No matter how hard I tried, I still could not fix the APIC for my dsdt, and left opencore in the past.

With the patch "Patch APIC" the system boots, but now I have another problem - I can’t do speedstep through ssdtPRGen.
Processor performance does not rise above 3.1Ghz (although it is 4.4 in turbo boost)
In opencore (why I tried to make it work) everything works there and has excellent CPU performance (but pcie devices do not work properly)
(benchmark test)

And through clover I get a very slow cpu

Could this be due to the fact that the first processor in the list is C000@2, but should be C000@0?
How to change "Local Apic ID" via dsdt?

[Max na]

On 9/3/2021 at 2:33 PM, MaLd0n said:

DSDT 02.zip 15.5 kB · 4 downloads

hello, can you tell me how to fix the sleep on the computer, the situation is this: the computer goes to sleep normally, the fans turn off, and for some reason the power to usb is turned off. To break up a computer using a keyboard or a mouse is not possible. You can only use the power button. But if you press the power button, the computer starts to turn on and after 5-7 seconds it turns off and then turns on again and so on ad infinitum. Please tell me - is this how you can fix it?

[MaLd0n]

sleep in x79 is rare