Jump to content
Crosx86

Acer Aspire 5750,I5-2430M-Intel HD 3000

Recommended Posts

Ola,instalei o lion e o snow nesse note em GUID,o lion(10.7.3)tenho tudo funcionando,agora no snow eu atualizei do 10.6 para 10.6.8 e não conssigo bootar ele mais,me parece que o meu pb esta relacionado com a grafica,ele boota normal e para em DSMOS has arrivied,ja tentei todas as flags,nada funcinou.

Por favor como devo proceder essa pós instalação no 10.6.8?

Obg.


OBS:Eu abri um topico a respeito desse mesmo notebook na seção do Lion,se os moderadores acharem por bem juntar os topicos fiquem a vontade.

OS X Mavericks 10 .9.3 - OS X Mountain Lion 10.8.5 - Kali Linux 1.0.6

Link to comment
Share on other sites

Tente remover as kexts da Intel HD para subir o sistema, depois teste com as kexts que funcionam no Lion.


Provavelmente vai ter que patchear a AICPM para poder remover a Null.

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

@Cassio

Tente remover as kexts da Intel HD para subir o sistema, depois teste com as kexts que funcionam no Lion.

 

No Lion eu não precisei mecher em nada,nem GraphicsEnabler=Yes no plist precisou,como eu posso saber qual as kexts testar(seria as kexts HD3000?)

Obg.

OS X Mavericks 10 .9.3 - OS X Mountain Lion 10.8.5 - Kali Linux 1.0.6

Link to comment
Share on other sites

Provavelmente vai ter que patchear a AICPM para poder remover a Null.

ta dando KP,eu to tendo pbs para patchear:

Mac-Pro-de-Carlos:~ carlos$ cd ~/Downloads/AICPMPatch
Mac-Pro-de-Carlos:AICPMPatch carlos$ perl AICPMPatch.pl /Users/Carlos/Desktop/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

/Users/Carlos/Desktop/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

arch: x86_64

found 11 wrmsr, should be 10, file is already patched or untested version


arch: i386

found 9 wrmsr, should be 10, file is already patched or untested version

Mac-Pro-de-Carlos:AICPMPatch carlos$ sudo perl AICPMPatch.pl /Users/Carlos/Desktop/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement --patch
Password:

/Users/Carlos/Desktop/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

arch: x86_64

found 11 wrmsr, should be 10, file is already patched or untested version


arch: i386

found 9 wrmsr, should be 10, file is already patched or untested version

 

ta dando erro.

OS X Mavericks 10 .9.3 - OS X Mountain Lion 10.8.5 - Kali Linux 1.0.6

Link to comment
Share on other sites

Estranho, porque no SpeedStepper ele fala em 10 ocorrências, por isso botei a verificação.

 

It patches 10 distinct write operations to MSR 0xE2, that is locked by the ASUS BIOS.

http://www.insanelymac.com/forum/index.php?showtopic=258611


Remova estas linhas do script e ele vai patchear independente da quantidade

	if($#enderecos != 9) {
	printf("found %d wrmsr, should be 10, file is already patched or untested version\n\n", $#enderecos+1);
	next;
}

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

@Cassio

Removi todas,são 9 kexts no total,inclusive a AppleVA.Bundle,as kexts que estão carregadas no Lion são exatamente essas,somente duas:AppleIntelHD3000Graphics.kext

AppleIntelSNBGraphicsFB.kext tentei bootar com elas la,mais nada,não sei mais oque fazer,olha isso no proprio da apple:

I'd attach no significance at all to the output of "TechTool." I know Apple distributes it to AppleCare customers, or used to do so, but that was just to give them something tangible to hold onto, not because it's good for anything.


If you carry out all the following steps and still can't boot, then you have a hardware failure:


Reset the SMC and NVRAM.

Disconnect all wired peripherals.

Boot from the installation disc

Partition the internal drive with the default options.

Run the Installer.

Reboot without importing anything.

Connect to Ethernet.

Run Software Update.

Boot again.

Mais é em um mac real.

OS X Mavericks 10 .9.3 - OS X Mountain Lion 10.8.5 - Kali Linux 1.0.6

Link to comment
Share on other sites

Eu instalaria o Mountain Lion DP1 para ter um segundo OS, não vale a pena ficar brigando com uma versão que mal suporta o seu hardware.

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

Ola,conssegui instalar o snow nesse note,retirei duas kexts para consseguir ver a tela pelo monitor do note,IntelHDGraphics.kext e IntelHDSNBGraphicsFB.kext,fiz variso testes com outras kexts,cheguei a por em screensharing e rolou com aceleração só em screensharing(cheguei a ter tela preta no note-monitor interno),alguem ajuda um rumo,pq tem muito pouca ciosa sobre...Obg.


Obs:usando chimera 1.8.0 com suporte ao 10.8 e GraphicsEnabler=Yes.


EDIT/RESOLVIDO:

Google e achei a solução,dowload essas kexts:intel hd 3000 kexts.zip

Instale manualmente (antes apague as iguais existentes)ou com o kextwizard ou kextutility eu fiz como na fonte,no poste original o cara manda instalar manualmente em S/L/E.

Após instalar as kexts rode os comandos no terminal:

sudo su -
cd /Sys*/Lib*/Ext*
chown -R root:wheel AppleIntelHDGraphics.kext
chown -R root:wheel AppleIntelSNBGraphicsFB.kext
chmod -R 755 AppleIntelHDGraphics.kext
chmod -R 755 AppleIntelSNBGraphicsFB.kext
kextcache -system-prelinked-kernel
kextcache -system-caches

 

Reboot e o video funciona com aceleração QE/CI.


Fonte:https://discussions.apple.com/thread/3209335?start=345&tstart=0

CORRECTION, should be 755:
newfoundglory wrote:

Oh, install instructions:

1. Download and extact each kext
2. Go to /System/Library/Extensions and delete the existing AppleIntelHDGraphics and AppleIntelSNBGraphicsFB (eg. move to trash)
3. Copy the ones you extracted into /System/Library/Extensions (you might get a warning after kextcache kicks in automatically, ignore this)
4.  Using terminal do:
sudo su -
cd /Sys*/Lib*/Ext*
chown -R root:wheel AppleIntelHDGraphics.kext
chown -R root:wheel AppleIntelSNBGraphicsFB.kext
chmod -R 755 AppleIntelHDGraphics.kext
chmod -R 755 AppleIntelSNBGraphicsFB.kext
kextcache -system-prelinked-kernel
kextcache -system-caches

(then restart the mac)

Second display should be gone, and version of those kexts should be 1.6.42

 

Obs:Aqui funcionou Mac OS X 10.6.8 smbios.plist MacBook Pro 8,1 Intel HD 3000 Mobile 128mb(na bios e 288MB no system profile) ID-01168086 o post original usa MacMini como smbios.

OS X Mavericks 10 .9.3 - OS X Mountain Lion 10.8.5 - Kali Linux 1.0.6

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...
The popup will be closed in 15 seconds...