RX560 hardware accelerated issues

[Alexander Wang]

Hi guys, so even though my DSDT is patched and my RX560 says Hardware acceleration is working it was having a hard time with 4k playback and sleep for longer then an hour is not working. 

I am thinking Framebuffering and headless mode may fix it what are your thoughts?

[MaLd0n]

2 hours ago, Alexander Wang said:

Hi guys, so even though my DSDT is patched and my RX560 says Hardware acceleration is working it was having a hard time with 4k playback and sleep for longer then an hour is not working. 

is just a correct config, in this case, Mojave, only dgpu don't work good, need use via Intel Quick Sync(IGPU), both need work together

[Alexander Wang]

Is there a guide on this forum on how to read and correct config.plist files? I have seen a few websites on basics but I am not sure what should be on it that's not or vice versa? 

[MaLd0n]

7 minutes ago, Alexander Wang said:

Is there a guide on this forum on how to read and correct config.plist files? I have seen a few websites on basics but I am not sure what should be on it that's not or vice versa? 

is a same hardware in previous post? Ivy Bridge?

[Alexander Wang]

21 hours ago, MaLd0n said:

is a same hardware in previous post? Ivy Bridge?

Yes 

but with WEG and Lilu 1.3.4 nothing changed. So old and latest WEG nothing changes. Shinkivga=16 or 80 same result. 
when i tried to play a 4k sample file it wouldnt play. 

Edited February 22, 2020 by Alexander Wang

[MaLd0n]

2 hours ago, Alexander Wang said:

Yes

with old weg kext u can use shikigva=60 or any shikigva bootarg, i tested in many hardware, work good

[Alexander Wang]

13 hours ago, MaLd0n said:

with old weg kext u can use shikigva=60 or any shikigva bootarg, i tested in many hardware, work good

config.plist.zipI have Injected Intel, WEG1.3.4 and used Shikgva 16,16,80 all same results. Will not play a 4k video. 4K video is just black. Will play 1080p fine but nothing else. You said correct config. Am I missing something? 

[MaLd0n]

3 hours ago, Alexander Wang said:

config.plist.zipI have Injected Intel, WEG1.3.4 and used Shikgva 16,16,80 all same results. Will not play a 4k video. 4K video is just black. Will play 1080p fine but nothing else. You said correct config. Am I missing something? 

u can try with iMac smbios instead?

[Alexander Wang]

Archive 2.zipAccording to Hacktool It say the Intel is disable. See files. Could this be a problem with my config. Even tho inject Kext is on. Only 32MB are stolen even though it say 1536MB Screen Shot 2020-02-23 at 1.46.19 PM.zip I have included Imac Config to see if that maybe helpful. I used imac13.2 smbios 

I have included Imac Run me files too. 

config.plist 2.zip Send me Axels-Mac-mini.zip

[MaLd0n]

6 hours ago, Alexander Wang said:

I have included Imac Run me files too

is wrong if appears here

 

in Graphics/Displays need appears only ur amd, intel hd appears in ioreg

[Alexander Wang]

Ok I have changed it in clover to be a headless I gpu. It calls it a Xeon Graphics accelerator. However It will not play back a 4k video that the real MAC will just fine.  Here is the test video I am trying to play. https://www.demolandia.net/4k-video-test/theater/page-1.html . Blue guy in the middle. My 2017 MBP plays it just fine.  In Quicksync if mine is working. it just plays a black screen. Before(IGP present in info) it would show a really laggy video with mismatched audio. 

[MaLd0n]

have some solution, take a shot

Quote

shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94

 

[Alexander Wang]

That was not enough but I found this https://hackintosher.com/guides/guide-to-fresh-installing-macos-mojave-on-a-hackintosh-10-14/ which helped get it working or at least the 4k video to playback. 

How do you link images to where they show in the post? I have HTML, IMG tags but mine never show like yours? 

 

[MaLd0n]

26 minutes ago, Alexander Wang said:

That was not enough but I found this https://hackintosher.com/guides/guide-to-fresh-installing-macos-mojave-on-a-hackintosh-10-14/ which helped get it working or at least the 4k video to playback. 

How do you link images to where they show in the post? I have HTML, IMG tags but mine never show like yours? 

u can test

just copy adress image with right mouse button and pste here

i'm using iMacPro1,1 or MacPro7,1 smbios for hardware accel without any injector or IGPU

[Alexander Wang]

Is there a way to tell if I have 5.1 audio or a way to enable it? 

[MaLd0n]

1 hour ago, Alexander Wang said:

Is there a way to tell if I have 5.1 audio or a way to enable it? 

i never use it, but work, some people use it, need check

[Alexander Wang]

Are there kext for AMD cards or audio config options?

[Alexander Wang]

https://imgur.com/a/s5JWwi5

My cpu is not running at full speed. is there something in the config that I am missing? it shows 3.4 GHZ on sys info but it only runs at 1.0GHZ to 1.2 at the most

Edited February 27, 2020 by Alexander Wang

[MaLd0n]

2 minutes ago, Alexander Wang said:

My cpu is not running at full speed. is there something in the config that I am missing? it shows 3.4 GHZ on sys info but it only runs at 1.0GHZ to 1.2 at the most

in ur case need generate a ssdt for good power management

https://www.olarila.com/topic/6451-guide-generate-ssdt-for-power-management-with-ssdtprgen/

and drop CpuPm and Cpu0Ist OEM SSDT if need

[Alexander Wang]

"drop CpuPm and Cpu0Ist OEM SSDT if need"

The first part SSDT is already in patched. those 2 options are not buttons on clover config are they? Am I just deleting those tags in the ssdt?

[MaLd0n]

[Alexander Wang]

I dropped the SSDTs no change. I checked IOReg I only have a couple C- states and P-States

[Alexander Wang]

I think IOreg is not seeing the SSDTs for PM. 

[MaLd0n]

5 minutes ago, Alexander Wang said:

I think IOreg is not seeing the SSDTs for PM. 

check ioreg

looks good. generate c3, c6, for good pstates u need refresh some times

[Alexander Wang]

[img=https://i.imgur.com/mhKfWxG.png]

THat screenshot was after 3 different refreshes. Same with AppleIntelInfo.kext too. CPU still doesn't go past 1.3Ghz with a Chinbench test or any other cpu taxing program