Please Help! Trying to install Mojave but it's not working on my motherboard Asus Rog Maximus XI Extreme

[hellas]

Hey guys,

I'm trying to install Mojave on this hardware and I can't get it to even boot the installer of Mac OS.

I've created a bootable drive and downloaded Olarila Mojave 10.14.3 then used Balena etcher to make it bootable. Then I pressed f8 and selected Mojave 10.14.3, then loads of commands appeared and then an X showed up on the screen. What should I do?

Also I'm curious since this motherboard has wi fi and bluetooth also usb c is there a way to make them work? ofc after the installation

Motherboard: Asus Rog Maximus XI Extreme

CPU: Intel i9 9900k

GFX: Saphire 580 Nitro 8GB

SSD: M.2 Samsung 970 Evo 250GB

RAM: 2X16GB KINGSTON HYPER X RED

[MaLd0n]

[ref]hellas[/ref], use usb 2 port in installation

[hellas]

That's what I did and still not working.

[MaLd0n]

[ref]hellas[/ref], post one photo

[hellas]

[MaLd0n]

[ref]hellas[/ref], the problem is usb, u need use usb 2 port or one usb 2 stick

[hellas]

I just managed to get it to start installing!

Added in 59 minutes 9 seconds:

I have issues with shutdown, restart, bluetooth and wifi can we fix this with dsdt?

Send me Alexs-iMac.zip

[erroruser]

[ref]hellas[/ref], intel chips dont work have to be replaced

[hellas]

Can we fix the shutdown and restart issue?

Added in 44 seconds:

Lover your service will donate once we solve this!

Added in 3 minutes 14 seconds:

Also usb c is not working and all usb 3.0 and 3.1 ports are not working. Only usb 2.0 is working

[erroruser]

[ref]hellas[/ref], read here

https://Olarila.com/forum/viewtopic.php?p=63533#p63533

full write up for usb

https://Olarila.com/forum/viewtopic.php?f=79&t=7370

shutdown fixes can be in dsdt edit

[hellas]

I'm sorry I'm very new at this, where can I find DSDT edit?

Added in 32 minutes 15 seconds:

This is so complicated I'll just wait for the legend MaLd0n to send DSDT from the request page, I'm scared that I mess something up.

[MaLd0n]

[ref]hellas[/ref], CLOVER.zip

[joselazovargas]

Hi Hellas,

Could you please describe step by step what you did to get the installer running? Thanks!

[MaLd0n]

[ref]joselazovargas[/ref], https://Olarila.com/forum/viewtopic.php?f=50&t=8685

[joselazovargas]

[ref]MaLd0n[/ref], Thanks, I already solve it, if anyone read this and is having the same problem that I had, check the Clover options at boot and check "Fix bug serie 300", I'll donate, this website helped my a LOT!

[MaLd0n]

[ref]joselazovargas[/ref],

[Rocnroll]

Hello...I have the same asus z390 maximus xi extreme with i9-9900k with no GPU besides the uhd630 Intel. I have a nzxt x72 kraken AIO COOLER and the a Asus thunderbolt 3EX AIC . can I please get help with a dsdt for mapping or patching the USB ports? Very few have this motherboard for Hackintosh and I'm a noob.

Thanks

[MaLd0n]

[ref]Rocnroll[/ref], use Olarila folder for serie 300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222