Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[zeta86]

Hi Maldon, i pasted the dsdt in patched folder, reboot and extracted new SEND_ME.

What should i do next?

Send me Christians-iMac.zip

[MaLd0n]

Hi Maldon, i pasted the dsdt in patched folder, reboot and extracted new SEND_ME.

What should i do next?

Attachments

not load, remove old SEND_ME in ur desktop, unzip DSDT.aml.zipand put in clover/acpi/patched, reboot and run our app again

[zeta86]

Hope i did it right this time.

Send me Christians-iMac.zip

[MaLd0n]

nope

[Dan_Marshall]

Hi MaLd0n,

Hope you are well mate - need some help again. Managed to get a Lenovo Thinkpad T470s and have installed High Sierra using your wonderful guide and tools.

However need some of your expertise to fine tune. Attached send me files. Hoping you can help out again

Donated beer money as thanks in advance.

Dan

Send me Macbooks-MacBook-Pro.zip

[MaLd0n]

Hi MaLd0n,

Hope you are well mate - need some help again. Managed to get a Lenovo Thinkpad T470s and have installed High Sierra using your wonderful guide and tools.

However need some of your expertise to fine tune. Attached send me files. Hoping you can help out again

Donated beer money as thanks in advance.

Dan

Hey

Let's go

CLOVER.zip

AppleBacklightInjector.kext use in l/e for avoid some problems

new send_me after reboot and tell me what not work

[Dan_Marshall]

Thanks MaLd0n,

System boots fine and everything appears to be working. Trackpad issues though - not as responsive as I'd like however can look into this.

Also battery indicator not showing up in toolbar - unable to click in sys prefs.

New file dump attached

Send me Macbooks-MacBook-Pro.zip

[MaLd0n]

Thanks MaLd0n,

System boots fine and everything appears to be working. Trackpad issues though - not as responsive as I'd like however can look into this.

Also battery indicator not showing up in toolbar - unable to click in sys prefs.

New file dump attached

u know what trackpad u have? i'll check battery

[Dan_Marshall]

Thanks MaLd0n - I believe it is an ALPS however the original driver under windows was from Synaptics

[MaLd0n]

Thanks MaLd0n - I believe it is an ALPS however the original driver under windows was from Synaptics

have this version by Dr. Hurt

VoodooPS2Controller.kext.zip

and have it too

ApplePS2SmartTouchPad.kext.zip

 

is just a correct kext for work good

[Dan_Marshall]

will check now and report

[MaLd0n]

will check now and report

use it, avoid usb errors

DSDT.aml.zip

battery don't have patch, we need check it

Added in 8 minutes 29 seconds:

battery try it

SSDT-BATC.aml.zip

 

and add it in boot args

abm_firstpolldelay=16000

[Dan_Marshall]

Using the Aplpeps2Smart kext and no change. Using the voodoo kext resulted in no trackpad usage at all.

Using Appleps2 kext with new DSDT. Dump files attached

Trying SSDT now

Added in 5 minutes 31 seconds:

Added in 8 minutes 29 seconds:

battery try it

SSDT-BATC.aml.zip

(1.07 KiB) Downloaded 1 time

and add it in boot args

abm_firstpolldelay=16000

 

No change unfortunately

Send me MacBook-Pro-2.zip

[MaLd0n]

Using the Aplpeps2Smart kext and no change. Using the voodoo kext resulted in no trackpad usage at all.

Using Appleps2 kext with new DSDT. Dump files attached

Trying SSDT now

Added in 5 minutes 31 seconds:

MaLd0n wrote: ↑

Added in 8 minutes 29 seconds:

battery try it

SSDT-BATC.aml.zip

(1.07 KiB) Downloaded 1 time

and add it in boot args

abm_firstpolldelay=16000

No change unfortunately

if dont work remove ssdt

check here some info

https://www.insanelymac.com/forum/topic/315451-guide-lenovo-t460-macos-with-clover/

have a similar files for t470p, is a very personal files, trackpad and battery

 

Arquivo Comprimido.zip

[Dan_Marshall]

Thanks MaLd0n - I will do some research on this and see what I can come up with.

Enjoy the beer

[MaLd0n]

Thanks MaLd0n - I will do some research on this and see what I can come up with.

Enjoy the beer

for battery, rehabman have one

https://www.tonycrapx86.com/threads/guide-how-to-patch-dsdt-for-working-battery-status.116102/

have one Slice kext too, VoodooBattery

check here about lenovo notebooks, have a amazing tuto, files etc

https://www.insanelymac.com/forum/topic/285678-lenovo-thinkpad-t420-with-uefi-only/?page=20&tab=comments#comment-1952283

[lem120]

Hi MaLdOn,

here's my DSDT

Thank you for your work and enjoy your beer

Send me iMac-di-Mario.homenet.telecomitalia.it.zip

[MaLd0n]

Hi MaLdOn,

here's my DSDT

Thank you for your work and enjoy your beer

CLOVER.zip

[StevenToast]

Hi, I'm trying to run the Run Me app and I permanently get in High Sierra 10.13.6 (I also added Run Me in Settings/Security & Privacy/Privacy - Allow these apps to control your computer, but the result is the same):

 

IOREG dump failed. Retrying
Increased delay x2 for IOREG dump. This will take a while...(33 sec)

 

I get to save the IOREG file, but for some reason it is not passing on.

I attached the files anyway, maybe IOREG dump was the last step in diagnostics.

Patched bios, Asus P8Z68-V pro (first edition, not Gen3), i7-2600K. I can boot, I can run High Sierra, sleep is taking 2-3 minutes to wake up from and the CPU overclock is not working properly: the frequency on Intel Power Gadget jumps only between 1.6 GHz - 3.0 GHz - 4.4 GHz (4.4 is the max I set in BIOS).

I tried generating SSDT with SSDT Automator but as soon as I put it in EFI drive, the boot hangs.

Will a proper DSDT help my case?

send_me.zip

[asheq]

have a problem with the runme.app program

After the file is extracted it appears as a zip. send asheq-iMAC.zip

How do I install the file via MaciASl?

[MaLd0n]

Asus P8Z68-V pro

CLOVER.zip

try generate one ssdt with overclock

Added in 42 seconds:

have a problem with the runme.app program

After the file is extracted it appears as a zip. send asheq-iMAC.zip

How do I install the file via MaciASl?

">

[StevenToast]

try generate one ssdt with overclock

 

Thank you for getting back to me, I tried two times only with overclock enabled in bios (100 x 44) for a total of 4400 MHz overclock speed. I suppose I should try with stock speeds. Anyway, I have he computer doing some encoding for another hour or so, so I can't try anything right now but I'll be back.

[asheq]

How do I install the file send asheq-iMAC.zip via MaciASl? Thank you

[MaLd0n]

no, is a full dump, not bios table

[asheq]

Sorry for the inconvenience that I did not understand how to use MaciASl