Jump to content
🎉 [ IMPORTANT ] Premium and Donators users ×
Borriel_69b

Gigabyte H61M-D2-B3 macOS 10.13 slow sleep + bad wake

By Borriel_69b, in High Sierra (10.13)

Recommended Posts

Borriel_69b

Borriel_69b

Posted
Posted

Hi,


I need some help, if possible ...


I was in mac 10.12 and all work ok. But, when I update to 10.13 I've got problems on sleep + wake and a problem with 1 HDD (de-attached auto. and no chance to mount again)


When I put Hackintosh to sleep it needs more than 2 minutes with SDD+HDD led on all the time. After this time, it sleeps but when wake I get a black screen and only the mouse cursor. HDD led brighting again. No option to do anything else. After a time cursor becomes coloured wheel then hangs.


Another tip: 1 of my HDD is unmounted auto. and no way to see in DU or 'diskutil list' again after 30-45 minuts of system start.


I attach my clover config.plist, the unpatched DSDT, and modified one. If you need more files please tell.

 

H61M-D2-B3.zip

 

Thanks to all.

Gibabyte H61M-D2-B3 F10 -- Core i3-2100 3.09 GHz -- Nvidia GeForce GT210 -- 16 Gb RAM KINGSTON DDR3 --

iMac 12,1 SMBIOS -- FRESCO FL1100 USB3.0

Link to comment
Share on other sites
Borriel_69b

Borriel_69b

Posted
  • Author
Posted

Hi. Thanks!


I replaced CLOVER folder.

I run ssdtPRGen.command. It generates some files on HSierra>Users>pc4>Library>ssdtPRGen with no errors but if fails on moving to /Extra folder on mounted EFI (Clover is not in EFI partiton. It'n on another HFS+ data volume). So I decide to copy 'ssdt.aml' on Clover>ACPI>patched (near dsdt.aml) and rebooted. Is it right?


Then, system seems to start right but... :


1. Internal Icons are orange external

2. HWMonitor sensors are incomplete and HWMonitor closes after some time.

3. Sleep works but my KB/mouse USB can't wake. POWER button wakes but black screen apeears. No response I had to reboot.

Gibabyte H61M-D2-B3 F10 -- Core i3-2100 3.09 GHz -- Nvidia GeForce GT210 -- 16 Gb RAM KINGSTON DDR3 --

iMac 12,1 SMBIOS -- FRESCO FL1100 USB3.0

Link to comment
Share on other sites
  • Administrators
MaLd0n

MaLd0n

Posted
  • Administrators
Posted

Hi. Thanks!


I replaced CLOVER folder.

I run ssdtPRGen.command. It generates some files on HSierra>Users>pc4>Library>ssdtPRGen with no errors but if fails on moving to /Extra folder on mounted EFI (Clover is not in EFI partiton. It'n on another HFS+ data volume). So I decide to copy 'ssdt.aml' on Clover>ACPI>patched (near dsdt.aml) and rebooted. Is it right?


Then, system seems to start right but... :


1. Internal Icons are orange external

2. HWMonitor sensors are incomplete and HWMonitor closes after some time.

3. Sleep works but my KB/mouse USB can't wake. POWER button wakes but black screen apeears. No response I had to reboot.

send me new dump with new files

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Problems with Paypal HERE

Link to comment
Share on other sites
Borriel_69b

Borriel_69b

Posted
  • Author
Posted

Ok I removed voodoohda but I'd have to keep AppleHDAdisabler.kext coz although Hsierra starts is very very slow.

Now I have AppleALC sound but wake after a sleep doesn't work. No difference with voodoohda.

One question: Has "SSDT.aml" be placed on the same folder as "DSDT.aml"?

Gibabyte H61M-D2-B3 F10 -- Core i3-2100 3.09 GHz -- Nvidia GeForce GT210 -- 16 Gb RAM KINGSTON DDR3 --

iMac 12,1 SMBIOS -- FRESCO FL1100 USB3.0

Link to comment
Share on other sites
  • Administrators
MaLd0n

MaLd0n

Posted
  • Administrators
Posted

Ok I removed voodoohda but I'd have to keep AppleHDAdisabler.kext coz although Hsierra starts is very very slow.

Now I have AppleALC sound but wake after a sleep doesn't work. No difference with voodoohda.

One question: Has "SSDT.aml" be placed on the same folder as "DSDT.aml"?

Yes, same folder

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Problems with Paypal HERE

Link to comment
Share on other sites
Borriel_69b

Borriel_69b

Posted
  • Author
Posted

Finally I found a solution from other forum. I just added two patches to AppleAHCIPort.kext via clover Kexttopatch: fix I/O error for ICH10 (2 parts).

Now I have sleep+wake. No HDD hanging or autoeject. All seems to work ok. All my "Sierra" settings are the same.


These are the new patches (apart from one for "Orange internals icons" that I had in Sierra).

 

                       <dict>
			<key>Comment</key>
			<string>fix I/O error for ICH10</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			RYX2D5XCiciD4P5mhcl4D4TSdQs=
			</data>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Replace</key>
			<data>
			iciD4P5mhckPmMFBCMyQkJCQdQs=
			</data>
		</dict>
		<dict>
			<key>Comment</key>
			<string>fix I/O error for ICH10</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=
			</data>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Replace</key>
			<data>
			kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=
			</data>
		</dict>

 

I have my internal Intel Graphic card disabled in BIOS. I use a "cheap" Geforce GT210 dedicated videocard.


Mald0n: you recommended to change VoodoHDA to lilu+AppleALC but It doesn't work in my case because I don't use any DSDT.aml (nor SSDT.aml) which is mandatory because AppleALC.kext needs a right "layout-id" from DSDT.aml.


I found a DSDT.aml which works with my computer (I attach here. I think it's the same from my fisrt post). Can anyboby patch this DSDT.aml to give a right "layout-id" to AppleALC?


Thanks!!

DSDT.zip

Gibabyte H61M-D2-B3 F10 -- Core i3-2100 3.09 GHz -- Nvidia GeForce GT210 -- 16 Gb RAM KINGSTON DDR3 --

iMac 12,1 SMBIOS -- FRESCO FL1100 USB3.0

Link to comment
Share on other sites
  • Administrators
Allan

Allan

Posted
  • Administrators
Posted

You can use AppleALC + Lilu and remove the VoodooHDA. Or use only VoodooHDA.


The correct layout-id to your codec is:

2096340758_ScreenShot2018-05-19at10_02_32.png.8a9d37be937f074fb4451acb5b21950e.png

 

Put the value at Devices > Audio: https://clover-wiki.zetam.org/Configuration/Devices#devices_audio

Thanks & Regards

IdeaPad Gaming 3i • Aspire A515-52 • Clover / OpenCore
We are in a great Forum, so, let's have some fun and learn from each other!

btn_donate_SM.gif

Link to comment
Share on other sites
  • Administrators
MaLd0n

MaLd0n

Posted
  • Administrators
Posted

Finally I found a solution from other forum. I just added two patches to AppleAHCIPort.kext via clover Kexttopatch: fix I/O error for ICH10 (2 parts).

Now I have sleep+wake. No HDD hanging or autoeject. All seems to work ok. All my "Sierra" settings are the same.


These are the new patches (apart from one for "Orange internals icons" that I had in Sierra).

CODE: SELECT ALL



Comment

fix I/O error for ICH10

Disabled


Find


RYX2D5XCiciD4P5mhcl4D4TSdQs=


Name

AppleAHCIPort

Replace


iciD4P5mhckPmMFBCMyQkJCQdQs=




Comment

fix I/O error for ICH10

Disabled


Find


icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=


Name

AppleAHCIPort

Replace


kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=




I have my internal Intel Graphic card disabled in BIOS. I use a "cheap" Geforce GT210 dedicated videocard.


Mald0n: you recommended to change VoodoHDA to lilu+AppleALC but It doesn't work in my case because I don't use any DSDT.aml (nor SSDT.aml) which is mandatory because AppleALC.kext needs a right "layout-id" from DSDT.aml.


I found a DSDT.aml which works with my computer (I attach here. I think it's the same from my fisrt post). Can anyboby patch this DSDT.aml to give a right "layout-id" to AppleALC?


Thanks!!

not a good DSDT, use my dsdt with ahci patch

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Problems with Paypal HERE

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing


Hackintosh Tutorials

Hackintosh Tutorials

Support Olarila by making a donation

×
×
  • Create New...

Hey! Welcome to Olarila.com  Please Disable Your ADBlocker!

3vHSCmh.png

Accept and Continue
Dismiss and Continue

The popup will be closed in 15 seconds...