psycmos Posted March 4, 2017 Share Posted March 4, 2017 Hi Olarila Lovers. I need some help. I construct my new hackintosh. i5 3570k + asus p8z77-v LK + GTX 970. I recently buy the Nvidea GTX 970 and after insert it on my hackintosh i enable nvidea using the webdrivers. The problem is: after insert the nvidea on my PC after boot some usbs not working on sierra 10.12.3. Some USB 2.0 and 3.0. I have no 3thy USB kexts installed, using default system drivers and until insert Nvidea all working ok. After attach it at my motherboard it boot with no Graphics acceleration( of corse because no drivers installed or nvidea injected), but i saw that some usbs are not working, just because i pluged it. Somebody can help me, because i don't know what nvidea can interefer at my USB. So i attach my files: -Original DSDT extrated by clover F5 - Pachted DSDT with MACIASL and asus source -Sendme zip. Some replys are very appreciated. Best Regards, Nuno Files.zip Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 4, 2017 Administrators Share Posted March 4, 2017 ur usb3 is Intel? send me full Clover folder send me ioreg too IORegistryExplorer 3.app.zip Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
psycmos Posted March 4, 2017 Author Share Posted March 4, 2017 I attached thw IOREG + Clover folder. About USB3 how can i find if it is intel? Best Regards, Nuno https://mega.nz/#!34Yj2JyL!mwwPbabgVS0Rs7cBkmrPvTARBxk091VxyGwjOgimv9I Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 4, 2017 Administrators Share Posted March 4, 2017 1- Update Clover https://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.4k_r4035.zip/download 2- Replace full folder psycmos.zip  use GTX 970 Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 4, 2017 Administrators Share Posted March 4, 2017 UR MOBO Intel® Z77 chipset: *4 4 porta(s) USB 3.0 (2 no painel traseiro, azul(s), conectores internos para mais 2 porta(s)) Intel® Z77 chipset: 10 porta(s) USB 2.0 (2 no painel traseiro, preta(s), conectores internos para mais 8 porta(s)) ASMedia® USB 3.0 controller: *4 2 porta(s) USB 3.0 (2 no painel traseiro, azul(s)) for asmedia, u can try genericusb, but only two ports https://bitbucket.org/RehabMan/os-x-generic-usb3/downloads/RehabMan-Generic-USB3-2015-1215.zip Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
psycmos Posted March 4, 2017 Author Share Posted March 4, 2017 Thanks for your work MaLd0n. After get the "login window" the USB2.0 take around 5seconds and start serivce and get usbs working. USB3.0 starts at bios system and not disable during boot like usb2.0 and at login window the service ubs are working and i can insert password without need wait 5 seconds to service start. Keeps without 2x usbs 3.0 non working, that board have 4 usbs 3.0 but with your fix just 2 are working and more 2x USB2.0 So if no other way to get all usbs working, with 2x usb2.0 and 2x usb3.0 is enough :D Thanks a lot for your work!! , but i don't understand way inserting the GTX970 cause USB BUG... very strange Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 4, 2017 Administrators Share Posted March 4, 2017 send me ioreg IORegistryExplorer 3.app.zip i dont like fakesmc sensors, many bug, if u like use intel monitor Intel® Power Gadget v3.0.3.dmg.zip run Olarila command for rebuild Olarila.command.zip Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
psycmos Posted March 5, 2017 Author Share Posted March 5, 2017 Thanks for your help!! Ok, i will removed the Sensor kexts and use the intel widget. So i attach the IOREG using your clover folder. https://mega.nz/#!q54gXBRK!i8Q_cF6mYsKJjBkmSmeEqWMNJlftjLKI_DH9n470ctE Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 5, 2017 Administrators Share Posted March 5, 2017 Very nice! HDMI audio work? use it, fakesmc mod for load LMU/Als0 patch FakeSMC.LMU.zip i apply many cosmetics too, in About This Mac / Pci Check Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
psycmos Posted March 5, 2017 Author Share Posted March 5, 2017 Thanks a lot MaLd0n. About the HDMI audio, i don't know if it works because i have no monitor with speakers to test it. About the modifications in About This Mac / Pci it are great!!! Other litle modification in PCI is my soundcard ( Creative Sound Blaster Audigy 4 PRO) Let me do some questions: I installed one modified bios from: https://github.com/danielstuart14/ASUS_BIOS_REPO You tick - AsusAICPUPM-> so i can untick it from clover right? And you insert : DropTables Signature DMAR Signature SSDT TableId CpuPm Signature SSDT TableId Cpu0Ist With generated ssdt by script i need it at clover? What it do? I like to know about hackintosh!!! Thanks a lot MaLd0n for help me!! Cheers Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted March 5, 2017 Administrators Share Posted March 5, 2017 Thanks a lot MaLd0n.About the HDMI audio, i don't know if it works because i have no monitor with speakers to test it. About the modifications in About This Mac / Pci it are great!!! Other litle modification in PCI is my soundcard ( Creative Sound Blaster Audigy 4 PRO) Let me do some questions: I installed one modified bios from: https://github.com/danielstuart14/ASUS_BIOS_REPO You tick - AsusAICPUPM-> so i can untick it from clover right? And you insert : DropTables Signature DMAR Signature SSDT TableId CpuPm Signature SSDT TableId Cpu0Ist With generated ssdt by script i need it at clover? What it do? I like to know about hackintosh!!! Thanks a lot MaLd0n for help me!! Cheers AsusAICPUPM, no problem, the option work for all DROP Tables, ever drop 3 tables Quote Support Olarila Vanilla Hackintosh by making a donation HERE About Premium Users you can check HERE Problems with Paypal HERE Link to comment Share on other sites More sharing options...
