Jump to content

send_me.zip file of Intel DH67BL.

Recommended Posts

Hello. The attached file is send_me.zip of my Intel DH67BL M/B with bios ver. 0125 (the newest one).

I've already tried the dsdt.aml for DH67BL in


But I could not boot without NullCPUPowerManagement.kext -> a kernel panic occurred by AppleIntelCPUPowerManagement.kext.

I hope that DH67BL m/b will be supported by AutoPatcher someday.

Thank you for your efforts.


* System Info:

CPU: Intel i5-2500K

M/B : Intel DH67BL (H67 chipset)

RAM: 2G DDR3 RAM x 2

VGA: Intel HD3000 IGD

O/S: Mac OSX 10.7 Lion

* M/B spec.


4 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets

Support for DDR3 1333/1066 MHz DIMMs

Support up to 32 GB of system memory


DVI-I and HDMI* connectors for processors with IntelĀ® HD Graphics


IntelĀ® High Definition Audio subsystem in the following configuration:

10-channel (7.1+ 2 independent multi-streaming) audio subsystem using the Realtek* ALC892 audio codec

5 analog audio ports and 1 optical S/PDIF out port

Internal S/PDIF header and front panel audio header

LAN support

Gigabit (10/100/1000 Mb/s) LAN subsystem using the IntelĀ® 82579V Gigabit Ethernet Controller

Peripheral interfaces

2 Serial ATA 6.0 Gb/s ports

3 Serial ATA 3.0 Gb/s ports + 1 port compatible with eSATA* extension

1 eSATA 3.0 Gb/s port

2 USB 3.0 ports (NEC USB 3.0 chip)

14 USB 2.0 ports, (6 back panel ports and 8 additional ports via 4 internal headers)

Expansion capabilities

1 PCI Express* 2.0 x 16 discrete graphics card connector

2 PCI Express 2.0 x 1 connectors

1 PCI Conventional bus connector


Link to comment
Share on other sites




Wow. It works !!!

By patching the kext, I can boot without NullCPUPM and speed-step is enabled.

Thank you. Thank you very much.

I really appreciate your kind help.


The following is to report a result in detail.

1. Sleep :

Works. Display and HDD turn off immediately.

It takes about 2 minutes to enter S3 state totally. (Fans stop. LED blinks) - I don't know this is a normal MAC behavior or not.

2. Wake :

I can wake the system by a usb mouse, a keyboard and a power botton.

But my usb keyboard is not detected thereafter. Reconnecting is need to use the keyboard.

I think this is a problem of my old usb keyboard, because my mouse works well after wakening.

3. Sleep with Timer setting in energy saving preference.

Not work. Only display turns off.

Link to comment
Share on other sites

muchas gracias por su respuesta pero he hecho todo el proceso, pero al iniciar en cualquier modo se reinicia

mi placa es dh67bl+i5 2400+ati hd 5670+4 ram

no se si pueda ser la configuraciĆ³n de la bios

he instaldo snow leopard iatkos 10.6.4 y funciona

alguna ayudita mil gracias

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...
The popup will be closed in 15 seconds...