Jump to content
ru379

Error booting macOS Big Sur installer

Recommended Posts

So, my problem is that when I'm booting in verbose mode, the boot gets stuck a while at "Invalid Argument (22)" you can see it in the screenshot and then it enters on a kernel panic and reboots, to create my EFI folder I followed the opencore oficial guide at https://dortania.github.io/OpenCore-Install-Guide/. My hardware is very old but I'm trying to give it a 2nd live.

When I boot Catalina it works perfectly without problems.

My specs:

CPU: Intel Core i3 - 540

GPU: Nvidia GeForece GT 710

RAM: 8 GB DDR3 1333 mhz at quad channel

Motherboard: ga-p55m-ud2 rev. 1.0

P.S.: I created my EFI to boot with legacy mode because my motherboard doesn't support UEFI.

P.S.S.: Sorry if my english is not well understood, I'm form Spain.

spacer.png

EFI OC.zip

Link to comment
Share on other sites

  • Administrators

seems like a usb problem

rename devices EHCI to EH01 and EH02 and use usbinjectall. check if work. use usb2 ports

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

55 minutes ago, dudewith said:

Try this EFI Folder.. https://linkk.me/LXQJ , make sure you have changed the serials

Thank you so much, it works

55 minutes ago, dudewith said:

Try this EFI Folder.. https://linkk.me/LXQJ , make sure you have changed the serials

It booted but get stuck on the apple logo with the bar filling up. I mean, it booted in verbose but when the animation of the bar filling up appears, the animation gets freeze. 

spacer.png

Edited by ru379
Link to comment
Share on other sites

14 hours ago, ru379 said:

Thank you so much, it works

It booted but get stuck on the apple logo with the bar filling up. I mean, it booted in verbose but when the animation of the bar filling up appears, the animation gets freeze. 

spacer.png

Sorry for the late reply..but try to reset your bios to default..and reset nvram..and what type of machine are trying to install it on?

Edited by dudewith
Link to comment
Share on other sites

2 hours ago, dudewith said:

Sorry for the late reply..but try to reset your bios to default..and reset nvram..and what type of machine are trying to install it on?

Doesn't matter the time, I'm trying to install on

i3 540

8gb ddr3 1333mhz quad channel

120gb ssd

Nvidia GeForce GT 710 1GB DDR3

Gigabyte GA-P55M-UD2 Motherboard

I tried to reset the bios and the nvram but same results, also changed my smbios to MacPro6,1 the guide that I followed says that this recommended smbios for my cpu (clarkdale)

2 hours ago, dudewith said:

Sorry for the late reply..but try to reset your bios to default..and reset nvram..and what type of machine are trying to install it on?

It booted I don't know why, but I was going to select my lenguaje and my mouse and keyboard stoped working but the RGB lights continue on

Ok the problem is that the installer gets freeze, is not the keyboard or the mouse

Edited by ru379
Link to comment
Share on other sites

On 5/18/2021 at 5:45 PM, ru379 said:

Doesn't matter the time, I'm trying to install on

i3 540

8gb ddr3 1333mhz quad channel

120gb ssd

Nvidia GeForce GT 710 1GB DDR3

Gigabyte GA-P55M-UD2 Motherboard

I tried to reset the bios and the nvram but same results, also changed my smbios to MacPro6,1 the guide that I followed says that this recommended smbios for my cpu (clarkdale)

It booted I don't know why, but I was going to select my lenguaje and my mouse and keyboard stoped working but the RGB lights continue on

Ok the problem is that the installer gets freeze, is not the keyboard or the mouse

Which guide is that?

Link to comment
Share on other sites

On 5/20/2021 at 12:21 AM, ru379 said:

This one:

https://dortania.github.io/OpenCore-Install-Guide/

Edit: It is the same guide you provided me in another forum to create my EFI folder for my Acer Nitro 5 laptop

You can still use the same guide to create an EFI for this machine..also check this out

https://dortania.github.io/OpenCore-Install-Guide/config.plist/clarkdale.html#starting-point

Edited by dudewith
Link to comment
Share on other sites

On 5/24/2021 at 10:57 AM, dudewith said:

You can still use the same guide to create an EFI for this machine..also check this out

https://dortania.github.io/OpenCore-Install-Guide/config.plist/clarkdale.html#starting-point

Sorry for the late reply.

I can boot into the installer but when the installer restarts and appears the apple logo and the time remaining to finish the installation, it gets stuck a while at ‚Äúless than a minute remaining‚ÄĚ after that it appears a window with the following text:

An error occurred applying the software update. Please help me.

P.S. I changed to clover because I couldn’t boot to the installer, in a while I will atach my EFI folder.

Link to EFI folder: https://easyupload.io/u702sn

Edited by ru379
  • Like 1
Link to comment
Share on other sites

On 5/30/2021 at 7:03 AM, ru379 said:

Sorry for the late reply.

I can boot into the installer but when the installer restarts and appears the apple logo and the time remaining to finish the installation, it gets stuck a while at ‚Äúless than a minute remaining‚ÄĚ after that it appears a window with the following text:

An error occurred applying the software update. Please help me.

P.S. I changed to clover because I couldn’t boot to the installer, in a while I will atach my EFI folder.

Link to EFI folder: https://easyupload.io/u702sn

Many thanks to ru379 for sharing your resources.

I have very similar hardware to yours, your board is GA-P55M-UD2, mine GA-H55M-UD2H; I too am using a GT710.

I downloaded your EFI from https://github.com/ru379/BigSur-Monterey-on-Clarkdale/releases

I used your OC 0.7.0v2 EFI on exactly the same macOS 12 Beta 1 installer, using Legacy Boot as this board does not have UEFI (I believe P55M-UD2 is also the same).

I thought even if the boards are not exactly the same, I should be able to get to the install page or even install with errors and then I can troubleshoot.

But no matter what I do, the usb installer will stop at asking me to turn on my mouse or trackpad. I discovered the keyboard does not work too in OC Menu Picker. I have changed mouse and keyboard and also the ports they are being plugged into. The USB installer boots ok from any of the USB ports.

In short, the usb boots fine but i can't go any further because the mouse and keyboard don't work,

I've tried many drivers and kexts:
VoodooPS2Controller
XHCI-unsupported.kext
USBInjectAll
CtlnaAHCIPort.kext
 
I also followed OC's official guide and tried with and without
UsbKbDxe.efi
UsbMouseDxe.efi
 
I made sure every time I change a kext or driver i update the config.plist file accordingly. But nothing worked.
 
In BIOS, serial port and USB Legacy both have been disabled.
 
I then created a the latest macOS 12 beta 9 installer using your 0.7.2 EFI, the exact same problem persisted.
 
Any help would be appreciated, I have been trying for days unfortunately.
 
spacer.png
 
spacer.png
Edited by potatohead
Link to comment
Share on other sites

  • Administrators

try renames devices usb to EH01 and EH02 and use usbinjectall

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

43 minutes ago, MaLd0n said:

try renames devices usb to EH01 and EH02 and use usbinjectall

many thanks for your swift reply.

i have included the patch according to this - https://github.com/non-vanilla-way/OpenCore-Post-Install/blob/master/extra-files/usb-rename.plist

USBInjectAll.kext is also used.

Still the same error.

Attached is my config.plist file, which is actually ru379's OC070v2 + EH01 & EH02 USb patch as recommended above.

config.zip

Edited by potatohead
Link to comment
Share on other sites

  • Administrators

need check what name usb device in ur acpi

vI1U23s.png

-Donations-

PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

New ways to earn money with Linkvertise HERE

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...