Jump to content
muzoboy

Lion 10.7.2 installation error, please take a look

Recommended Posts

Hi guys,


I am taking this message when I installing 10.7.2 in verbose mode :


[sendHCIRequestFormated] ### ERROR: [0x0402] (HCI Inquiry Cancel) -- Send Request Failed (err = 0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))


Why is this happen ?


P.C. = I used all of flags and didn't work any (lie busratio,cpus, graphics enabler,npci,pci etc.) And on normal boot it is going to apple with rolling circle and it is waiting for a long. And S3 is working normal without a few hardware.


cpus : Intel i7 740 M

Gpu : Geforce GT 425M

Sound : Realtek ALC275

Wi-fi : Atheros 9287

Ethernet : Marvell Yukon 88E8057

Link to comment
Share on other sites

I guess IOBluetoothFamily is enough.


Use the USB install method, it's easier to change files in the base system http://Olarila.com/forum/viewtopic.php?f=17&t=134


I got a similar case (it was a Vaio laptop) and it worked using patches EHCI and IRQs (Sandy Bridge) in DSDT http://Olarila.com/forum/viewtopic.php?f=19&t=634

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

Hi bro,


i tried to install L2 with many different ways but no. I get pci begin; fixed it and get error like below in verbose mode :


''[sendHCIRequestFormated] ### ERROR: [0x0402] (HCI Inquiry Cancel) -- Send Request Failed (err = 0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))''


I deleted IOBluetoothfamily.kext; no error but no boot. These are all in -v mode.


If I use normal boot or -x and the others it is booting, i see apple and rolling circle and it is rolling continously and dvd is stopping. I tried to add DSDT file from windows to installation DVD and nothing change. I am always taking these errors :


ApplePS2ALPSGlidePoint: Dictionary Object: HIDDefaultParameters Value: ??

ApplePS2ALPSGlidePoint: Dictionary Object: HIDClickTime Value: 500000000ApplePS2ALPSGlidePoint: Dictionary Object: HIDClickSpace Value: ??

.

.

.

And always it is being a bug : warning (device/dev/disk0s5, pid 324): ntfs_system_inodes_get():$LogFile is not clean. Will not ad-write. Mount in windows.

Previous Shutdown Cause: 3

voodooPS2synapticsTouchPad loaded

Not interval found for . Using 8000000


What is your suggestions ?

Link to comment
Share on other sites

Try this

dsdt.aml.zip

 

Use USB install method and put dsdt.aml in /Extra.


Please read http://Olarila.com/forum/viewtopic.php?f=19&t=634


I did only basic patching to try fixing your problem, if you get it installed you will have to do it again to have it 100% working.

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

If it doesn't work via USB with this dsdt.aml, I have no other idea.


Post a photo of the screen in boot verbose.


Use Wait=yes -v and check if Extra/dsdt.aml is loaded.

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

Hello Cassio,


I downloaded L1 (10.7.1), i used DSDT that u fixed, i changed relevant folder for PCI Begin error, I changed GraphicsEnabler=No on the bootlist and i installed it -x mode. It is succesfully installed but it is not opening. Waiting on apple logo continously. I tried a lot of commands include Wait=yes -v. But always same sittuation : PCI Begin error !!!! I couldn't understand, cause i patched and i used npci=0x2000 also PCIRootUIG=1 but same.... What u say ?


34img0230.th.jpg

Link to comment
Share on other sites

The same thing you did on the installer base system, you have to do in the installed partition.

 

i used DSDT that u fixed, i changed relevant folder for PCI Begin error

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

Hello Cassio,


When I open the system in -f mode ; it's coming a small window and it says 'Apple.......kext and IOPCIfamily.kext didn't install wright' or something like that. And i cant repaier permissions on multishit because of this.


Second, I tried the same things for L2 but it is not loading, it's waiting on apple logo with rolling circle also -x mode.


waiting for your kind replies :)

Link to comment
Share on other sites

When you replace IOPCIFamily and AppleACPIPlatform you have to repair their permissions.


My advice: forget things like multishit and L2, and learn how to do it right.

ASUS N53Jq • CPU: Intel Core i7-740QM 1.73GHz • RAM: 6,0GB • HD: 500GB • GPU: GeForce GT 425M 1GB 1920x1080 • OS: OS X 10.8.4 • Linux Mint 15 • Windows 8

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...
The popup will be closed in 15 seconds...