Hackintosh Guide - High Sierra / Mojave / Catalina / BigSur / Monterey on X299 with Clover Bootloader

[v.osypets]

v.osypets, if u use mojave, the system have a 15 ports limit, u need live with it

 

I have already implemented USB legacy kext for this purposes, but have problems with sleep on two frontal USB-port, when there is USB flash drive inserted.

[MaLd0n]

[ref]v.osypets[/ref], but if u mobo have 15+ ports, u need kill some

[x299]

Hi MaLd0m,

Could you help me get a DSDT for the fallowing

cpu: i9-9980xe

Gigabyte X299 WU8

Thanks

Send me Admins-iMac-2.zip

[MaLd0n]

[ref]x299[/ref], DSDT.aml.zip

extract new SEND_ME after reboot

[x299]

Here you Go MaLd0n

Send me Admins-iMac-2.zip

[MaLd0n]

[ref]x299[/ref], DSDT.aml.zip

[Henrryh]

MaLd0n, can you help me?

At the first installation it is freezing on this screen, always at the end.

Asus Prime Deluxe Firmware 1503

i9 7960X

m.2 Samsung 860

Thank you.

[Henrryh]

I still have not found the DSDT that you gave me.

[MaLd0n]

MaLd0n, can you help me?

At the first installation it is freezing on this screen, always at the end.

Asus Prime Deluxe Firmware 1503

i9 7960X

m.2 Samsung 860

Thank you.

post one screenshot

[Henrryh]

After a long time I was able to install it, everything was configured correctly, working perfect.

When I went to install the second M.2 and the other SSDs SATA SSD and Normal Hds gave these errors now.

I can not even get back by the pendrive.

The CSM in Bios was off.

[MaLd0n]

After a long time I was able to install it, everything was configured correctly, working perfect.

When I went to install the second M.2 and the other SSDs SATA SSD and Normal Hds gave these errors now.

I can not even get back by the pendrive.

The CSM in Bios was off.

u use a last aptiomemoryfix driver? the problem is it

[vip284]

I used a ready image of mojave since I only have windows, but I replaced F:\EFI\CLOVER with yours and I set my bios correctly but it didn't boot up and stucked at (++++++++++++)

So do I have to completely set the setup from the beginning or what should I do ?

[MaLd0n]

I used a ready image of mojave since I only have windows, but I replaced F:\EFI\CLOVER with yours and I set my bios correctly but it didn't boot up and stucked at (++++++++++++)

So do I have to completely set the setup from the beginning or what should I do ?

last bios version?

u can try a other uefi driver too

[vip284]

last bios version?

Yes It's the latest version. Iget through this step

but now I'm stuck at @kec.corecrypto 1.0

[MaLd0n]

[ref]vip284[/ref], post one photo

[vip284]

post one photo

[MaLd0n]

[ref]vip284[/ref], i need a previous screen, rec one movie with good quality

[vip284]

rec one movie with good quality

I just have to mention that I used -x as extra arg

https://www.sendspace.com/file/lmfc5d

[MaLd0n]

[ref]vip284[/ref], no idea, bro

create usb stick again

[daovanhoi]

Hi MaLd0m,

Could you help me get a DSDT for the fallowing

Cpu: e5 1620v3

Asrock x99 taichi

Sapphire RX580

Thanks!

Send me Mac-Pro.zip

[MaLd0n]

[ref]daovanhoi[/ref], DSDT.aml.zip

[daovanhoi]

daovanhoi,

DSDT.aml.zip

(21.19 KiB) Not downloaded yet

Thanks Bro so much!

[Subsystems]

Hi! I was searching for implementations for x299 motherboards and I found this thread.

Can you create an DSDT for me? I what to check it out...

Regards.

EDIT: I have the Asus Prime X299 Deluxe on RMA and at this moment I'm using the TUF Mark 2

Send me SubsystemssiPro.zip

[MaLd0n]

[ref]Subsystems[/ref], u need use my clover folder for a correct rename, x299 have a biois/uefi very hard

[Subsystems]

Subsystems, u need use my clover folder for a correct rename, x299 have a biois/uefi very hard

Correcting, just a moment.

Will post the report as soon as possible, thanks!