Jump to content
lucke77

Mac OS Version: No Yet Set... (Acer 6930G)

Recommended Posts

Hi at all,

At the first reboot after Lion installation (on my existing SL 10.6.8 partition), my 6930G go in KP, the message:



"Mac OS Version

Not Yet Set


Kernel Version:

Darwin Kernel Version 11.1.0: Tue Jul...



System Uptime in nanoseconds: 980246880"


I have repaired permission and disk, but Nothing...


Any advice, help?

Asus M12F - i9 10900k - RAM 32GB - RX5700XT SE Nitro+ 8GB - BS 11.1

Link to comment
Share on other sites

Install Lion to a clean partition, not on the Snow Leopard one.


If you still get KP, post a photo of the screen.

-Donations-

PayPal HERE - Stripe HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Link to comment
Share on other sites

Hi at all,

I've two strange issue... the first one, after using sleep and wake my laptop, cmos resets...?

second one, only in x64 mode, if i boot with npci=0x2000, my system boot regular, but the trackpad is not working well (no scrolling or double touch)

if i boot without npci=0x2000 but in -s -f, trackpad working very fine...

Need a little help... Please!

Asus M12F - i9 10900k - RAM 32GB - RX5700XT SE Nitro+ 8GB - BS 11.1

Link to comment
Share on other sites

You need to patch AppleRTC to fix CMOS reset after sleep.


http://www.insanelymac.com/forum/index.php?s=&showtopic=253992


The other problem may be related to cache. Did you enable UseKernelCache? Are PS2 kexts in /S/L/E or /E/E?

-Donations-

PayPal HERE - Stripe HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Link to comment
Share on other sites

You need to patch AppleRTC to fix CMOS reset after sleep.


http://www.insanelymac.com/forum/index.php?s=&showtopic=253992


The other problem may be related to cache. Did you enable UseKernelCache? Are PS2 kexts in /S/L/E or /E/E?

 

I have not enabled UseKernelCache. PS2 kext (from: http://www.kexts.com/downloads.php?do=file&id=1448) are in /S/L/E

Asus M12F - i9 10900k - RAM 32GB - RX5700XT SE Nitro+ 8GB - BS 11.1

Link to comment
Share on other sites

If you have an Extensions.mkext file in /System/Library/Caches/com.apple.kext.caches/Startup, you have to update it manually when you install or remove kexts.

-Donations-

PayPal HERE - Stripe HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Link to comment
Share on other sites

Ok Cassio, solved...

Added UseKernelCache=Yes to org.chameleon.Boot.plist


and for sleep-wake CMOS Reset problem i've installed AppleRTC 1.3.1, from 10.6.8 Combo Update which i have extract with pacific.

Asus M12F - i9 10900k - RAM 32GB - RX5700XT SE Nitro+ 8GB - BS 11.1

Link to comment
Share on other sites

I'm sorry, but unfortunately I have to work for a living ... So ...


This is the procedure I followed after several months of tests and sleepless nights and the help of great team Olarila... :D


You must install Lion with unishit, following the guide of tonycrapx86.com.

At the end of the creation of the USB key, you must copy some kext in it, exactly:

in E/E: AppleACPIPS2Nub.kext & ApplePS2Controller.kext

can be found here:

http://www.osx86.net/downloads.php?do=file&id=1448


in S/L/E: AppleACPIPlatform.kext; IO80211Family.kext; IOPCIFamily.kext.


IO80211Family.kext & AppleACPIPlatform.kext, from SL 10.6.8.

IOPCIFamily.kext, you must have a version of "specific" for your laptop, so to have functioning wi-fi, network, usb etc ...

I followed this forum and I found a IOPCIFamily working for my NB, here:

http://www.projectosx.com/forum/index.php?showtopic=694&st=0


Fact this, it would be better that you had already compiled DSDT and operating at 99%. If you copy it into the Extras folder.


Get a USB keyboard, just for the installation ...


Boot from USB key, with the flag -x ...

Asus M12F - i9 10900k - RAM 32GB - RX5700XT SE Nitro+ 8GB - BS 11.1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...