Jump to content
HACKOSX

Clover Boot

Recommended Posts

inserindo ela no config.plist tu não vais mais precisar digitar ela.

Se quando viaja faz o que quer, quando viajar, não leve a mulher

.

Core I5 750 12gb 500gb GTX 760(macOS 10.12, macOS 10.12.Xb, Win10)

Pentium 4 3.06 2gb 80gb fx5200 (10.5.8)

iMac G3 400Mhz 512mb Rage 8Mb (10.4.11)


Save OSX86... Don't Let Tony win!

Link to comment
Share on other sites

Pessoal, o meu problema com o clover é que ele parece não estar lendo o config.plist.

Fiz as alterações necessárias para meu caso, mas o clover não "enxerga" as alterações.

Fiz uma pesquisa, mas não encontrei nada a respeito disso.


A versão que estou utilizando é o Clover r3113 instalado em GPT.


Será que alguém pode me dar uma luz do que pode estar ocorrendo.

Quem pensa por si mesmo é livre, e ser livre é coisa muito séria...

Renato Russo.


Desktop Intel H61H2-M2, Core i3, 4gb RAM, GeForce GT 520 (OS X Yosemite 10.10, Ubuntu 14.10 & Win 7 Pro)

Notebook Core 2 Duo, 4gb RAM, GeForce 9100G (Win 8 Pro)

Link to comment
Share on other sites

ali mesmo, depois do kext-dev-mode=1 dá espaço e digita a flag e salva.

Se quando viaja faz o que quer, quando viajar, não leve a mulher

.

Core I5 750 12gb 500gb GTX 760(macOS 10.12, macOS 10.12.Xb, Win10)

Pentium 4 3.06 2gb 80gb fx5200 (10.5.8)

iMac G3 400Mhz 512mb Rage 8Mb (10.4.11)


Save OSX86... Don't Let Tony win!

Link to comment
Share on other sites

Obrigado pelo retorno!


boot.log >

0:100  0:100  MemLog inited, TSC freq: 3092973318
0:100  0:000  LegacyRegion2: Chipset/proc: 0x01008086
0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:100  0:000  , Install = Success
0:112  0:012  BiosVideoDriverBindingStart!
0:112  0:000  BiosVideoCheckForVbe
0:112  0:000  EdidOverride not found
0:267  0:155   Edid1-
0:422  0:155   Edid0-
0:443  0:021     0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
0:444  0:000     1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
0:445  0:000     2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
0:446  0:000     3 1280x1024 attr=3BF - ok
0:451  0:004     4 1600x1200 attr=3BF - ok
0:451  0:000  BV new mode: 2 1024x768
0:817  0:366   SetMode pref 2 (2) = Success
2:382  1:564  
2:382  0:000  Now is 17.1.2015,  12:42:56 (GMT+2047)
2:382  0:000  Starting Clover rev 3113 on CLOVER EFI
2:382  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000) @7B4EF298
2:382  0:000  SelfDirPath = \EFI\CLOVER
2:382  0:000  Total Memory Slots Count = 2
2:382  0:000  Type 17 Index = 0
2:382  0:000  Ignoring insane frequency value 0MHz
2:382  0:000  SmbiosTable.Type17->Speed = 0MHz
2:382  0:000  SmbiosTable.Type17->Size = 0MB
2:382  0:000  SmbiosTable.Type17->Bank/Device = BANCO 1 CanalA-DIMM1
2:382  0:000  Type 17 Index = 1
2:382  0:000  SmbiosTable.Type17->Speed = 1333MHz
2:382  0:000  SmbiosTable.Type17->Size = 2048MB
2:382  0:000  SmbiosTable.Type17->Bank/Device = BANCO 3 CanalB-DIMM1
2:382  0:000  Boot status=0
2:382  0:000  Clover revision: 3113  running on H61H2-M2
2:382  0:000  ... with board H61H2-M2
2:382  0:000  Clover load options size = 0 bytes
2:407  0:024  Using OEM config.plist at path: EFI\CLOVER\config.plist
2:407  0:000  EFI\CLOVER\config.plist loaded: Success
2:413  0:005  Found theme directory: christmas
2:420  0:006  Found theme directory: newyear
2:425  0:005  Loading early settings
2:425  0:000  timeout set to 5
2:425  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
2:425  0:000  Default theme: christmas
2:425  0:000  LoadDrivers() start
2:425  0:000  LoadDrivers() end
2:425  0:000  SetScreenResolution: 1280x1024 - setting Mode 3
2:425  0:000  BV new mode: 3 1280x1024
2:975  0:549  Video mode change to mode #3: Success
3:034  0:059  Console modes reported: 4, available modes:
3:034  0:000    Mode 1: 80x25
3:034  0:000    Mode 2: 80x50
3:034  0:000    Mode 3: 100x31
3:034  0:000    Mode 4: 160x53 (current mode)
3:034  0:000  Console modes reported: 4, available modes:
3:034  0:000    Mode 1: 80x25
3:034  0:000    Mode 2: 80x50
3:034  0:000    Mode 3: 100x31
3:034  0:000    Mode 4: 160x53 (current mode)
3:034  0:000  SetScreenResolution: 1280x1024 - already set
3:034  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000)
3:034  0:000  CPU Vendor = 756E6547 Model=206A7
3:034  0:000  The CPU not supported turbo
3:034  0:000  BrandString = Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
3:034  0:000  MSR 0xE2 before patch 1C008401
3:034  0:000  MSR 0xE2 is locked, PM patches will be turned on
3:034  0:000  MSR 0xE4              00000414
3:034  0:000  MSR 0xCE              00001000_60011F00
3:034  0:000  non-usable FLEX_RATIO = 10000
3:034  0:000  corrected FLEX_RATIO = 0
3:034  0:000  MSR 0x1B0             00000000
3:034  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
3:034  0:000  Corrected FSBFrequency=100MHz
3:034  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
3:034  0:000  Family/ExtFamily: 0x6/0x0
3:034  0:000  MaxDiv/MinDiv: 31.0/16
3:034  0:000  Turbo: 31/31/31/31
3:034  0:000  Features: 0xBFEBFBFF
3:034  0:000  Threads: 4
3:034  0:000  Cores: 2
3:034  0:000  FSB: 100 MHz
3:034  0:000  CPU: 3100 MHz
3:034  0:000  TSC: 3100 MHz
3:034  0:000  PIS: 400 MHz
3:034  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
3:034  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
3:034  0:000  PCI (00|01:00.00) : 10DE 1040 class=030000
3:034  0:000  Found NVidia model=GeForce GT 520
3:034  0:000  PCI (00|01:00.01) : 10DE 0E08 class=040300
3:034  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
3:034  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
3:034  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
3:034  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
3:034  0:000  PCI (00|00:1C.04) : 8086 1C18 class=060400
3:034  0:000  PCI (00|03:00.00) : 1969 2062 class=020000
3:034  0:000  LAN 0, Vendor=1969, MMIO=F7100000
3:034  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
3:035  0:000  PCI (00|00:1F.00) : 8086 1C5C class=060100
3:035  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
3:035  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
3:035  0:000   get legacy LAN MAC, 1 card found
3:035  0:000  Legacy MAC address of LAN #0= 10:78:D2:BA:B0:ED:
3:035  0:000  ScanSPD() start
3:035  0:000  SMBus CmdReg: 0x3
3:035  0:000  Scanning SMBus [8086:1C22], mmio: 0xF7205004, ioport: 0xF000, hostc: 0x1
3:068  0:032  SPD[3]: Type 11 @0x53 
3:076  0:008  Not using XMP because it is not present
3:076  0:000  DDR speed 1333MHz 
3:076  0:000  Slot: 3 Type 24 2048MB 1333MHz Vendor=Smart Modular PartNo=SH564568FH8N0QHSCR SerialNo=000404070F03090F 
3:197  0:120  ScanSPD() end
3:206  0:009  Get Acpi Tables List from RSDT:
3:206  0:000   Found table: FACP  A M I len=132
3:206  0:000   Found table: APIC  A M I len=114
3:206  0:000   Found table: FPDT  A M I len=68
3:206  0:000   Found table: MCFG  A M I len=60
3:206  0:000   Found table: HPET  A M I len=56
3:206  0:000   Found table: SSDT  SataTabl len=877
3:206  0:000   Found table: SSDT  Cpu0Ist len=2474
3:206  0:000   Found table: SSDT  CpuPm len=2850
3:206  0:000  Calibrated TSC frequency =3092973318 =3092MHz
3:206  0:000  Loading main settings
3:206  0:000  USB FixOwnership: true
3:206  0:000  Dropping 3 tables
3:206  0:000  Drop table 0 signature="DMAR" (52414D44)
3:206  0:000  set table: 52414D44,                0 to drop:
3:206  0:000  Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
3:206  0:000  set table: 54445353,       6D50757043 to drop:  true
3:206  0:000  
3:206  0:000  Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
3:206  0:000  set table: 54445353,   74734930757043 to drop:  true
3:206  0:000  
3:206  0:000  Config set Fixes will override FixMask mask!
3:206  0:000     final mask=9FE6F9D7
3:207  0:000  found 8 volumes with blockIO
3:207  0:000   0. Volume:
3:207  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:214  0:007    Result of bootcode detection: bootable unknown (legacy)
3:214  0:000   1. Volume:
3:214  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
3:218  0:004    Result of bootcode detection: bootable unknown (legacy)
3:218  0:000   2. Volume:
3:218  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)
3:219  0:000    Result of bootcode detection: bootable unknown (legacy)
3:219  0:000   3. Volume:
3:219  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
3:219  0:000    found optical drive
3:219  0:000   4. Volume:
3:219  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,MBR,0x7F8C0599,0x3F,0x12A18A82)
3:220  0:000    Result of bootcode detection: bootable unknown (legacy)
3:220  0:000   5. Volume:
3:220  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,B73285DC-8A23-4EE9-AA22-39703283F8A1,0x28,0x64000)
3:221  0:000    Result of bootcode detection: bootable unknown (legacy)
3:221  0:000    This is SelfVolume !!
3:221  0:000   6. Volume:
3:221  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(2,GPT,611B4AD8-B47C-4D1A-B04B-3C431DF3811F,0x64028,0x9375100)
3:232  0:011    Result of bootcode detection: bootable unknown (legacy)
3:232  0:000   7. Volume:
3:232  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(3,GPT,E46A31FA-3158-4D23-9C91-B618A3697411,0x93D9128,0x135F20)
3:341  0:108  Loading nvram.plist from Vol 'Machintosh' - loaded, size=365
3:365  0:023  PutNvramPlistToRtVars ...
3:365  0:000   Adding Key: LocationServicesEnabled: Size = 1, Data: 01 
3:365  0:000   Adding Key: fmm-computer-name: Size = 15, Data: 69 4D 61 63 20 64 65 20 45 64 65 72 73 6F 6E 
3:365  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
3:365  0:000  Using theme 'christmas' (EFI\CLOVER\themes\christmas)
3:365  0:000  OS main and drive as badge
3:369  0:003  font WoR_NovaMono_9W_A.png loaded from themedir
3:369  0:000  Choosing theme christmas
3:369  0:000  Custom entries start
3:369  0:000  Custom entries finish
3:369  0:000  Scanning loaders...
3:369  0:000   0: 'Whole Disc Boot' no file system
3:369  0:000   1: 'Whole Disc Boot' no file system
3:369  0:000   2: 'Whole Disc Boot' no file system
3:369  0:000   3: 'Whole Disc Boot' no file system
3:369  0:000   4: 'Legacy HD1' no file system
3:369  0:000   5: 'EFI'
3:407  0:037   6: 'Machintosh'
3:436  0:028      AddLoaderEntry for Volume Name=Machintosh
3:454  0:018      Check if volume Is Hibernated:
3:454  0:000      Check sleep image 'by signature':
3:513  0:059      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:513  0:000      SleepImage name from pref: ImageVolume = 'Machintosh', ImageName = '\private\var\vm\sleepimage'
3:541  0:028      sleepimage not found -> Not Found
3:541  0:000       hibernated: no - sign
3:751  0:209   7: 'Recovery HD'
3:782  0:031      AddLoaderEntry for Volume Name=Recovery HD
3:810  0:027  Custom legacy start
3:810  0:000  Custom legacy end
3:810  0:000  Scanning legacy ...
3:810  0:000   0: 'Whole Disc Boot' (legacy) not legacy
3:810  0:000   1: 'Whole Disc Boot' (legacy) not legacy
3:810  0:000   2: 'Whole Disc Boot' (legacy) not legacy
3:810  0:000   3: 'Whole Disc Boot' (legacy) not legacy
3:810  0:000   4: 'Legacy HD1' (legacy) not legacy
3:810  0:000   5: 'EFI' (legacy) not legacy
3:810  0:000   6: 'Machintosh' (legacy) not legacy
3:810  0:000   7: 'Recovery HD' (legacy) not legacy
3:810  0:000  Custom tool start
3:810  0:000  Custom tool end
3:842  0:032  found tool \EFI\CLOVER\tools\Shell64U.efi
3:842  0:000  Checking EFI partition Volume 5 for Clover
3:842  0:000   Found Clover
3:844  0:001  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
3:844  0:000  EfiBootVolume not found
3:844  0:000  Default boot entry not found
3:844  0:000  DefaultIndex=-1 and MainMenu.EntryCount=8
3:844  0:000  Use anime=Anim_1_Logo frames=26
4:728  0:884  Found Mouse device:
4:728  0:000  GUI ready
196:437  191:708  BootOption of the entry is empty
196:437  0:000  StartLoader() start
196:437  0:000  Finally: Bus=99773kHz CPU=3092MHz
196:437  0:000  Kernel and Kext Patches:
196:437  0:000  	Allowed: y
196:437  0:000  	Debug: n
196:437  0:000  	KernelCpu: n
196:437  0:000  	Lapic: n
196:437  0:000  	AICPUPM: n
196:437  0:000  	AppleRTC: y
196:437  0:000  	KernelPm: n
196:437  0:000  	FakeCPUID: 0x0
196:437  0:000  	ATIController: <null string>
196:437  0:000  	ATIDataLength: 0
196:437  0:000  	0 Kexts to load
196:437  0:000  	0 Kexts to patch
196:437  0:000  Loading boot.efi  status=Success
196:627  0:190  GetOSVersion: : 10.10
196:627  0:000  insert table 9 for dev 0:0
196:627  0:000  insert table 9 for dev 0:0
196:628  0:000  Trusting SMBIOS...
196:628  0:000  Detected alternating SMBIOS channel banks
196:628  0:000  Channels: 1
196:628  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
196:628  0:000  SMBIOS Type 17 Index = 0 => 0 0:
196:628  0:000  BANK0 DIMM0 EMPTY
196:628  0:000   partNum=SH564568FH8N0QHSCR
196:628  0:000  SMBIOS Type 17 Index = 1 => 1 1:
196:628  0:000  BANK0 DIMM1 1333MHz 2048MB
196:628  0:000  mTotalSystemMemory = 2048
196:628  0:000  SMBIOS Type 17 Index = 2 => 3 3:
196:628  0:000  BANK0 DIMM3 1333MHz 2048MB
196:628  0:000  mTotalSystemMemory = 4096
196:628  0:000  NumberOfMemoryDevices = 3
196:628  0:000  Type20[0]->End = 0x1FFFFF, Type17[1] = 0x800
196:628  0:000  Table 131 is present, CPUType=31
196:628  0:000  Change to: 903
196:628  0:000  RSDT 0x7CA8C028
196:628  0:000  FADT from RSDT: 0x7CA8C0E0
196:628  0:000  XSDT 0x7CA8C070
196:628  0:000  FADT from XSDT: 0x7CA98490
196:628  0:000  Xsdt reallocation done
196:628  0:000  old FADT length=10C
196:628  0:000  Found OperationRegion(GNVS, SystemMemory, 7CEC3E18, ...)
196:628  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
196:628  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
196:628  0:000  Found OperationRegion(CPSB, SystemMemory, 7CA87E18, ...)
196:628  0:000  Found OperationRegion(IGDM, SystemMemory, 0, ...)
196:628  0:000  Found OperationRegion(EWMI, SystemMemory, FF000000, ...)
196:628  0:000  Found OperationRegion(SMBC, SystemMemory, 0, ...)
196:628  0:000  Found OperationRegion(GCAD, SystemMemory, 7CEC6018, ...)
196:628  0:000  Found OperationRegion(PRFA, SystemMemory, 7CEC4018, ...)
196:628  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
196:628  0:000  Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
196:628  0:000  Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
196:639  0:011  Apply DsdtFixMask=0x9FE6F9D7 new way
196:639  0:000     drop _DSM mask=0xFFFF
196:639  0:000  ========= Auto patch DSDT Starting ========
196:639  0:000  VideoCard devID=0x104010DE
196:639  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
196:639  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
196:640  0:000  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
196:640  0:000  first CPU found at 789D offset 78A0
196:640  0:000  score candidate at 7899
196:640  0:000  score inserted in acpi_cpu_score _PR_
196:640  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
 within the score: _PR_
196:640  0:000  Found PCIROOTUID = 0
196:640  0:000  Start RTC Fix
196:640  0:000  found RTC Length not match, Maybe will case CMOS reset will patch it.
196:640  0:000  found RTC had IRQNoFlag will move -3 bytes
196:640  0:000  ...len=C35E
196:640  0:000  new size written to 2784 shift=0 len=C35E
196:640  0:000  len after correct outers C35E
196:640  0:000  Start TMR Fix
196:640  0:000  Start PIC Fix
196:641  0:000  PIC size=A5 at 2628
196:641  0:000  found CRS at 263C size 8D
196:641  0:000  found PIC had IRQNoFlag will move -3 bytes
196:641  0:000  Fix Device PIC size -3
196:641  0:000  Start HPET Fix
196:641  0:000  Start Display0 Fix
196:642  0:000  Found internal video device FFFF@4009, unusable
196:642  0:000  Creating DSM for NVIDIA card
196:642  0:000  patch Display #0 of Vendor=0x10DE in DSDT new way
196:642  0:000  Start NetWork Fix
196:642  0:000  found NetWork device [0x001C0004:0] at 3C86 and Name is PXSX
196:642  0:000  NetworkADR1=1C0004 NetworkADR2=0
196:642  0:000  network DSM created, size=5F
196:642  0:000  Start SBUS Fix PCI=152A len=C346
196:642  0:000  device (SBUS) found at 5458
196:642  0:000  SBUS code size fix = 0x0000005D
196:642  0:000  patch HDEF in DSDT 
196:643  0:000  Start HDA Fix
196:643  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
196:643  0:000  NewName HDEF already present, renaming impossibble
196:643  0:000  Start HDMI133 Fix
196:643  0:000  have no HDMI device while HDMIADR2=1
196:643  0:000  HDMIADR1=10000 HDMIADR2=1
196:643  0:000    with default properties
196:643  0:000  Start USB Fix
196:644  0:000  USB bridge[1A0000] at 4AA9, size = 3A0
196:644  0:000   found slave _DSM, skip
196:644  0:000  USB bridge[1D0000] at 456D, size = 53A
196:644  0:000   found slave _DSM, skip
196:644  0:000  Start _WAK Return Fix
196:644  0:000  _WAK Method find return data, don't need to patch.
196:644  0:000  return len=C46B
196:644  0:000   deleting device CRT_
196:645  0:000   deleting device DVI_
196:645  0:000   deleting device SPKR
196:645  0:000   deleting device ECP_
196:645  0:000   deleting device LPT_
196:645  0:000   deleting device FDC0
196:646  0:000   deleting device ECP1
196:646  0:000   deleting device LPT1
196:647  0:000  Start PNLF Fix
196:647  0:000  found PWRB at 4292
196:647  0:000  Start _S3D Fix
196:647  0:000  OperationRegion (GNVS...) corrected to addr=0x7CEC3E18
196:647  0:000  OperationRegion (MCHT...) corrected to addr=0xFED10000
196:647  0:000    indirect name=SRCB
196:647  0:000  OperationRegion (RCRB...) corrected to addr=0xFED1C000
196:647  0:000  OperationRegion (CPSB...) corrected to addr=0x7CA87E18
196:647  0:000    indirect name=ASLB
196:647  0:000  ... value not defined
196:647  0:000  OperationRegion (IGDM...) corrected to addr=0x0
196:647  0:000  OperationRegion (EWMI...) corrected to addr=0xFF000000
196:647  0:000  OperationRegion (SMBC...) corrected to addr=0x0
196:647  0:000  OperationRegion (GCAD...) corrected to addr=0x7CEC6018
196:647  0:000  OperationRegion (PRFA...) corrected to addr=0x7CEC4018
196:647  0:000  OperationRegion (TMMB...) corrected to addr=0xFED40000
196:647  0:000  OperationRegion (TVID...) corrected to addr=0xFED40F00
196:647  0:000  OperationRegion (TPMR...) corrected to addr=0xFED40000
196:647  0:000  Start ADP1 fix
196:647  0:000  no device(AC) exists
196:647  0:000  Start Darwin Fix
196:647  0:000  Name _OSI present at 0x1C8C, renaming to OOSI
196:647  0:000  Name _OSI present at 0x8363, renaming to OOSI
196:647  0:000  Name _OSI present at 0x836A, renaming to OOSI
196:647  0:000  Name _OSI present at 0x8386, renaming to OOSI
196:647  0:000  Name _OSI present at 0x83A6, renaming to OOSI
196:647  0:000  Name _OSI present at 0x83C6, renaming to OOSI
196:647  0:000  Name _OSI present at 0x83E4, renaming to OOSI
196:647  0:000  Name _OSI present at 0x8400, renaming to OOSI
196:647  0:000  Name _OSI present at 0x841C, renaming to OOSI
196:647  0:000  Start SHUTDOWN Fix len=C540
196:648  0:000  ========= Auto patch DSDT Finished ========
196:648  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2850
196:648  0:000   Xsdt has tables count=8 
196:648  0:000   Table: SSDT  CpuPm  2850 dropped
196:648  0:000  corrected XSDT length=92
196:648  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
196:648  0:000   Xsdt has tables count=7 
196:648  0:000   Table: SSDT  Cpu0Ist  2474 dropped
196:648  0:000  corrected XSDT length=84
196:648  0:000  Patch table: SSDT  SataTabl
196:648  0:000   SSDT len = 0x36D
196:648  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
196:648  0:000   Xsdt has tables count=6 
196:648  0:000  corrected XSDT length=84
196:648  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
196:648  0:000  Maximum control=0x1F
196:648  0:000  P-States: min 0x10, max 0x1F
196:648  0:000  SSDT with CPU P-States generated successfully
196:648  0:000  SSDT with CPU C-States generated successfully
196:648  0:000  EdidDiscovered size=0
196:648  0:000  mem_detected 1073741824
196:648  0:000  read_nVidia_ROM
196:648  0:000  Using PRAMIN fixups
196:805  0:156  patch_nvidia_rom
196:805  0:000  version 75.19.4F.00.00
196:805  0:000  nVidia GeForce GT 520  1024MB NVD9 [10DE:1040] :: 
196:805  0:000  PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)
196:805  0:000  devprop_add_nvidia_template
196:805  0:000  default_NVCAP: 04000000-00000300-0C000000-00000007-00000000
196:805  0:000  USB Controller [8086:1C2D] :: PcieRoot(0x0)\Pci(0x1A,0x0)
196:805  0:000  HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => detected codec: 1106:4397
196:805  0:000  USB Controller [8086:1C26] :: PcieRoot(0x0)\Pci(0x1D,0x0)
196:805  0:000  stringlength = 3034
196:805  0:000  CurrentMode: Width=1280 Height=1024
196:805  0:000  FSInjection: not started - gFSInjectProtocolGuid not found
196:806  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
196:806  0:000  Custom boot is disabled
196:806  0:000  Closing log

 

Aparentemente está carregando o config.plist, mas coisas como tema, velocidade do mouse, outros discos, não estão tendo efeito.


Agradeço sua ajuda e aguardo resposta.

Quem pensa por si mesmo é livre, e ser livre é coisa muito séria...

Renato Russo.


Desktop Intel H61H2-M2, Core i3, 4gb RAM, GeForce GT 520 (OS X Yosemite 10.10, Ubuntu 14.10 & Win 7 Pro)

Notebook Core 2 Duo, 4gb RAM, GeForce 9100G (Win 8 Pro)

Link to comment
Share on other sites

olá


Using OEM config.plist at path: EFI\CLOVER\config.plist

EFI\CLOVER\config.plist loaded: Success

Found theme directory: christmas

Found theme directory: newyear

Loading early settings

2:425 0:000 timeout set to 5

2:425 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

2:425 0:000 Default theme: christmas

2:425 0:000 LoadDrivers() start

2:425 0:000 LoadDrivers() end

2:425 0:000 SetScreenResolution: 1280x1024 - setting Mode 3

2:425 0:000 BV new mode: 3 1280x1024

2:975 0:549 Video mode change to mode #3: Success

3:034 0:059 Console modes reported: 4, available modes:

3:034 0:000 Mode 1: 80x25

3:034 0:000 Mode 2: 80x50

3:034 0:000 Mode 3: 100x31

3:034 0:000 Mode 4: 160x53 (current mode)

3:034 0:000 Console modes reported: 4, available modes:

3:034 0:000 Mode 1: 80x25

3:034 0:000 Mode 2: 80x50

3:034 0:000 Mode 3: 100x31

3:034 0:000 Mode 4: 160x53 (current mode)

3:034 0:000 SetScreenResolution: 1280x1024 - already set


so pode estar mal configurado..


http://clover-wiki.zetam.org/Configuration#Config.plist-structure


bom hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

Ok artur-pt!


Vou uma olhada com mais atenção no config.plist.

Tenho usado o Clover Configurator para alterar as configurações, pois ainda tenho receio de altera-las manualmente.

Vou tentar com o Property List Editor e ver como fica.


Mas tenho uma ressalva: tenho 4 temas instalados na pasta /EFI/CLOVER e no log de boot somente aparecem 2 temas...

Enfim, é somente uma ressalva.


Obrigado pela ajuda.

Quem pensa por si mesmo é livre, e ser livre é coisa muito séria...

Renato Russo.


Desktop Intel H61H2-M2, Core i3, 4gb RAM, GeForce GT 520 (OS X Yosemite 10.10, Ubuntu 14.10 & Win 7 Pro)

Notebook Core 2 Duo, 4gb RAM, GeForce 9100G (Win 8 Pro)

Link to comment
Share on other sites

boa parte do aprendizado é na base da tentativa e erro. vai tranquilo.

Se quando viaja faz o que quer, quando viajar, não leve a mulher

.

Core I5 750 12gb 500gb GTX 760(macOS 10.12, macOS 10.12.Xb, Win10)

Pentium 4 3.06 2gb 80gb fx5200 (10.5.8)

iMac G3 400Mhz 512mb Rage 8Mb (10.4.11)


Save OSX86... Don't Let Tony win!

Link to comment
Share on other sites

Olá amigos, meu problema com o boot do clover é que ele estava normal iniciando pelo HD, agora ele aparece so um underline ( _ ) na parte superior esquerda com tela escura e so inicia portanto pelo pendrive, possíveis causas levando em conta o que eu fiz e que poderia ter influenciado no problema: instalei o windows numa maquina virtual Parallels Desktop, instalei um hardware (water cooler) no CPU e quando inicio a bios informou que um novo firmware tinha sido instalada e claro varias atualizações do Clover Bootloader. Alguma opinião do porque o clover não ta iniciando pelo HD.


Obs. nas ordens de Boot da Bios continua setado o clover boot loader como primeiro do mesmo jeito, minha bios é UEFI.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...
The popup will be closed in 15 seconds...