titoon Posted November 14, 2022 Share Posted November 14, 2022 good morning all i return to the forum for my new hackintosh on which i block fir its installation of Ventura and this is also my first time using opencore. My configuration of my machine is planned with 2 graphics cards so that i can also run under UNRAID OS. i use each card output in displayport with the 2 identical monitors.When i boot on the Ventura OSX, the display goes to the output of the RX3080ti off i would like it to come out only on the RX580 for its compatibility with OSX. For MaLdOn : i tested your patched DSDT but i can'tget to the installation os Ventura , it block at the ACPI level. ( SSDT-OLARILA600.aml ) when i look at opencore it speaks that ACPI absolutely must have : SSDT-Plug-ALt.aml. and SSDT-AWAC-disable.aml. and SSDT-DMAC.aml. and SSDT-EC.aml. My config,Plist is MACPRO7.1 with GenSMBIOS.  Motherboard. MSI Z690-A PRO Wifi DDR4. ( MS-7D25 ) bios ver E7D25IMS.192 Cpu : Intel I9-12900K Ram 2 X corsair DDR4. 3200. 16- 20-20-38 1,350v Graphique 1 on PCIE1 Gen5 RX3080TI graphique 2 on PciE2 Gen4 RX580 pulse NVME 1. : Windows 11 NVME2 : planned to install OSX NVME3 : reserved Unraid cache NVME4 : reserved Unraid VM - docker - data PCIE-5 : Fenvi card wifi/bluetooth  ( Wifi on board desactived ) thanks for your help , Phil   Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted November 14, 2022 Administrators Share Posted November 14, 2022 https://www.olarila.com/topic/20908-easy-fast-and-perfect-vanilla-hackintosh-clover-and-opencore-windows-linux-or-macos/ Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill [email protected] BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @[email protected] Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
titoon Posted November 18, 2022 Author Share Posted November 18, 2022 hi MaldOn, I have no problem wanting to donate , but I would like to have answers to my questions and so to move forward together if possible, because I already did this in the past but I did not receive any results.my config is certainly not imple but I do not believe that it remains impossible to achieve.I would like to be able to install MacOs (Monterey or Ventura) on this configuration which obviously has 2 graphics cards installed in this machine. I obviously tried a lot of EFI to guide me but unfortunately none of them have this hardware installed like me, so would you be able to guide me and be able to install MacOSX on it without having to remove this RTX3080i? After many tries, I'm stuck at this. best regards ,Phil  Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted November 18, 2022 Administrators Share Posted November 18, 2022 1- update bios to last version 2- use bios in full default 3- use olarila efi folder for alder lake 4- use usb2 port for easy installation 5- we need disable this nvidia via acpi or device properties Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill [email protected] BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @[email protected] Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
titoon Posted November 19, 2022 Author Share Posted November 19, 2022 9 hours ago, MaLd0n said: 1- update bios to last version 2- use bios in full default 3- use olarila efi folder for alder lake 4- use usb2 port for easy installation 5- we need disable this nvidia via acpi or device properties 1 Bios : it's laste. : 7D25V192. 2022-10-17 2 : I'm going to set it back to default and put this: VT-D enable , CFG disable , Wifi and bluetooth on board disable , TB disable , intel speed test enable , TPM disable. 3 : I am using your file right now with your SSDT-olarila-600.aml. and I also tested with your DSDT.aml from the forum you    made , I redo a new usb stick with ventura and I only place your EFI on it with only the SSDT-olarila-600.aml. 4: i use only this port , no use USB3.0. 5 : I don't know how I can achieve this, here is the photo of the motherboard where I placed my elements on it. Quote Link to comment Share on other sites More sharing options...
titoon Posted November 19, 2022 Author Share Posted November 19, 2022 hi, here, I redid everything from points 1 to 5 and I arrive at this url=https://zupimages.net/viewer.php?id=22/46/enkm.jpg][/url]  Quote Link to comment Share on other sites More sharing options...
titoon Posted November 19, 2022 Author Share Posted November 19, 2022 hi MaLdON, I went back to Windows to recover my ACPI extract my DSDT.AML file and I took the opportunity to look at the properties of my 2 graphics cards: RTX3080ti PCIROOT (0) PCI(0100) PCI (0000) ACPI (_sb_) ACPI (pc00) ACPI (PEG1) ACPI ( PEGP) SB PC00 PEG1 PEGP  RX580 PCIROOT (0) PCI(1C04) PCI (0000) ACPI (_sb_) ACPI (pc00) ACPI (RP05) ACPI ( PXSX) SB PC00 RP05 PXSX I modified the SSDT-GPU-DISABLE file with my values for the RTX3080,attached files are my DSDT.aml and SSDT-GPU-disable-rtx3080. when I start, I am blocked on APPLEkeystoretest.  ACPI.zip Quote Link to comment Share on other sites More sharing options...
titoon Posted November 19, 2022 Author Share Posted November 19, 2022 (edited) hi, MaLdOn, I am finally on the installation of Monterey, after 40 hours of work en test.  to place my 2 monitors on the Rx580 board, for the moment it turns, it is with this one that I write  url=https://zupimages.net/viewer.php?id=22/46/kyb4.png][/url] Edited November 20, 2022 by titoon 1 Quote Link to comment Share on other sites More sharing options...