JeVr0oz Posted October 18, 2022 Share Posted October 18, 2022 (edited) Hello everyone, I installed Monterey 12.6 on HP ProDesk 600 G6 😃 (And update on Ventura without issues) For informations : CPU : i5 10500T Comet Lake-S Motherboad chipset : Comet Point-H Q470GPU: Intel UHD Graphics 630Sound : Realtek ALC987RAM : 32GB 2666MhzEthernet : Intel I219-LMWiFi/BT : Intel AX201 Intel AX200 WiFi 6 / BT 5SSD : Nvme KIOXIA 512GB + Nvme KIOXIA 256Go (has data and EFI backup)All USB ports works (6 USB 3.0 + 1 USB type-C 3.2)All working without errors. I'm very happy Computer is small, quiet and super fast. Dortania method with OpenCore 0.8.5 and .kext form Olarila (Thanks again to @MaLd0n) for perfect EFI folder ❤️ macOS Ventura update works, just update the kext to alpha or beta and it's works. For AX201, remove it and find a AX200 to replace. It's working perfectly with airportitlwm.kext 2.2.0 alpha version BIOS Settings : Security : TPM Embedded, TPM Device : Enabled BIOS Sure Start : All disabled, just "Dynamic Runtime Scanning of Boot Block" checked Secure Boot : All disabled Intel Software Guard : DisabledAdvanced : Boot options : Startup Delay : 0 Enabled : Fast boot; USB Storage Boot, Audio Alerts during boot, UEFI Boot Order : 1) OpenCore HP Sure Recover : All disabled System Options : Enabled : Turbo-Boost, Hyperthreading, VTx Built-IN Devices : Enabled : Embedded LAN Controller, Audio Device, Internal Speakers, M2 USB/Bluetooth, Video Memory Size: 256Mb Want to find a Intel Core i7 10700T for replace the i5. Edited April 17, 2023 by JeVr0oz Update, BIOS Settings 2 Quote Link to comment Share on other sites More sharing options...
idle4you Posted October 25, 2022 Share Posted October 25, 2022 Good afternoon! Could you provide your EFI folder for download? Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted October 25, 2022 Author Share Posted October 25, 2022 59 minutes ago, idle4you said: Good afternoon! Could you provide your EFI folder for download? Of course yes, it's this link : https://drive.google.com/drive/folders/16XgI1G5GKGJusCpwPwbP6kwZXSyMtCyI?usp=sharing 1 Quote Link to comment Share on other sites More sharing options...
smdc19812011 Posted November 30, 2022 Share Posted November 30, 2022 can you share your bios settings to make this work? Quote Link to comment Share on other sites More sharing options...
siamcolo Posted December 1, 2022 Share Posted December 1, 2022 Big thanks for EFI #wait efi for ventura🥰 On 11/30/2022 at 7:22 AM, smdc19812011 said: can you share your bios settings to make this work? Secure Boot #off Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted December 1, 2022 Author Share Posted December 1, 2022 1 hour ago, siamcolo said: Big thanks for EFI #wait efi for ventura🥰 Secure Boot #off I've made Ventura upgrade. Just make update kext I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm. Update the kext and it's working good 1 1 Quote Link to comment Share on other sites More sharing options...
siamcolo Posted December 2, 2022 Share Posted December 2, 2022 On 12/1/2022 at 6:46 PM, JeVr0oz said: I've made Ventura upgrade. Just make update kext I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm. Update the kext and it's working good 🙏Thanks , I Will Buy AX200 🙏 Quote Link to comment Share on other sites More sharing options...
smdc19812011 Posted December 20, 2022 Share Posted December 20, 2022 On 12/1/2022 at 7:46 PM, JeVr0oz said: I've made Ventura upgrade. Just make update kext I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm. Update the kext and it's working good do you have an updated EFI for ventura? Quote Link to comment Share on other sites More sharing options...
Cimafranca, Bracil G. Posted January 5, 2023 Share Posted January 5, 2023 Hello. Does Airdrop, handoff, sidecar airplay, continuity and other wireless features of macOS works on the AX200 card? Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted January 6, 2023 Author Share Posted January 6, 2023 Yes, it's works Sidecar I don't use it I don't know if it's works Quote Link to comment Share on other sites More sharing options...
Cimafranca, Bracil G. Posted January 8, 2023 Share Posted January 8, 2023 Thank you. Just the info i needed to purchase one. Thank you for the response. 1 Quote Link to comment Share on other sites More sharing options...
smdc19812011 Posted January 16, 2023 Share Posted January 16, 2023 (edited) anyone tried dual monitors? my prodesk has 2 dport monitors and only 1 is detected after successful install. hope anyone can help BTW this rocks! just followed the dortiana and used this EFI and boom! Edited January 16, 2023 by smdc19812011 Quote Link to comment Share on other sites More sharing options...
smdc19812011 Posted January 19, 2023 Share Posted January 19, 2023 On 1/17/2023 at 4:43 AM, smdc19812011 said: anyone tried dual monitors? my prodesk has 2 dport monitors and only 1 is detected after successful install. hope anyone can help BTW this rocks! just followed the dortiana and used this EFI and boom! Already resolved my issue. Dual monitor working 1 Quote Link to comment Share on other sites More sharing options...
CloverLeaf Posted January 20, 2023 Share Posted January 20, 2023 On 1/19/2023 at 2:22 AM, smdc19812011 said: Already resolved my issue. Dual monitor working Hey buddy, can you share how you solve the problem ? Quote Link to comment Share on other sites More sharing options...
smdc19812011 Posted January 23, 2023 Share Posted January 23, 2023 On 1/21/2023 at 6:13 AM, CloverLeaf said: Hey buddy, can you share how you solve the problem ? Used 2 DP to VGA and it works. Tried 2 DP to HDMI or 1 dp to HDMI and 1 DP to VGA and the vga out is the only one that works. In terms of resolution its able to output 1080 to my 1080 monitors. 1 Quote Link to comment Share on other sites More sharing options...
Thun Fischente Posted January 30, 2023 Share Posted January 30, 2023 hi, thank you so much for your sharing EFI, everything works perfectly, but when I use sleep, the machine just at lock screen status because the light of mouse is still active, do you meet the same issue with me? Quote Link to comment Share on other sites More sharing options...
micnad Posted April 13, 2023 Share Posted April 13, 2023 Hello. The link for the EFI does not work anymore. Can you upload it again? What changes did you make in the bios? Can you provide a copy of the settings of this one. Thank you. Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted April 17, 2023 Author Share Posted April 17, 2023 On 4/13/2023 at 5:08 PM, micnad said: Hello. The link for the EFI does not work anymore. Can you upload it again? What changes did you make in the bios? Can you provide a copy of the settings of this one. Thank you. EFI link works for me. I will write the BIOS settings in somes hours. I lost my Hackintosh after update of OpenCore and no EFI backup, I will make a new installation Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted April 17, 2023 Author Share Posted April 17, 2023 On 4/13/2023 at 5:08 PM, micnad said: Hello. The link for the EFI does not work anymore. Can you upload it again? What changes did you make in the bios? Can you provide a copy of the settings of this one. Thank you. First post edited for BIOS settings Quote Link to comment Share on other sites More sharing options...
billyj Posted June 16, 2023 Share Posted June 16, 2023 On 1/23/2023 at 4:48 PM, smdc19812011 said: Used 2 DP to VGA and it works. Tried 2 DP to HDMI or 1 dp to HDMI and 1 DP to VGA and the vga out is the only one that works. In terms of resolution its able to output 1080 to my 1080 monitors. Hi, great to know you were able to enable both DP; I have a question - did you make any changes to the EFI or was it plug and play.. because I have an HP Pro Desk 600 G2 using DP to HDMI adapters but can't seem to get the second monitor working. Your assistance will be highly appreciated. Quote Link to comment Share on other sites More sharing options...
Bruno Santana Posted September 8, 2023 Share Posted September 8, 2023 On 10/18/2022 at 8:17 PM, JeVr0oz said: Hello everyone, I installed Monterey 12.6 on HP ProDesk 600 G6 😃 (And update on Ventura without issues) For informations : CPU : i5 10500T Comet Lake-S Motherboad chipset : Comet Point-H Q470GPU: Intel UHD Graphics 630Sound : Realtek ALC987RAM : 32GB 2666MhzEthernet : Intel I219-LMWiFi/BT : Intel AX201 Intel AX200 WiFi 6 / BT 5SSD : Nvme KIOXIA 512GB + Nvme KIOXIA 256Go (has data and EFI backup)All USB ports works (6 USB 3.0 + 1 USB type-C 3.2)All working without errors. I'm very happy Computer is small, quiet and super fast. Dortania method with OpenCore 0.8.5 and .kext form Olarila (Thanks again to @MaLd0n) for perfect EFI folder ❤️ macOS Ventura update works, just update the kext to alpha or beta and it's works. For AX201, remove it and find a AX200 to replace. It's working perfectly with airportitlwm.kext 2.2.0 alpha version BIOS Settings : Security : TPM Embedded, TPM Device : Enabled BIOS Sure Start : All disabled, just "Dynamic Runtime Scanning of Boot Block" checked Secure Boot : All disabled Intel Software Guard : DisabledAdvanced : Boot options : Startup Delay : 0 Enabled : Fast boot; USB Storage Boot, Audio Alerts during boot, UEFI Boot Order : 1) OpenCore HP Sure Recover : All disabled System Options : Enabled : Turbo-Boost, Hyperthreading, VTx Built-IN Devices : Enabled : Embedded LAN Controller, Audio Device, Internal Speakers, M2 USB/Bluetooth, Video Memory Size: 256Mb Want to find a Intel Core i7 10700T for replace the i5. Hey there. First of all, great job on running BigSur on this. I have recently purchased one too, but with an i7 10700T processor included. I was planning on getting Ventura or even Sonoma. Given our processor variant, is there anything that would I need to change from your EFI to make it work with my i7 variant? Apart from that, I believe Ventura requires some specific changes from BigSur, but I can't remember which ones (I have already made them on two other devices I own [SP4 and Acer NITRO 5] and no longer have the BigSur EFIs. Would you be willing to shed some light on this issue? Thank you in advance. Best regards, Bruno. Quote Link to comment Share on other sites More sharing options...
JeVr0oz Posted October 1, 2023 Author Share Posted October 1, 2023 On 9/8/2023 at 12:13 PM, Bruno Santana said: Hey there. First of all, great job on running BigSur on this. I have recently purchased one too, but with an i7 10700T processor included. I was planning on getting Ventura or even Sonoma. Given our processor variant, is there anything that would I need to change from your EFI to make it work with my i7 variant? Apart from that, I believe Ventura requires some specific changes from BigSur, but I can't remember which ones (I have already made them on two other devices I own [SP4 and Acer NITRO 5] and no longer have the BigSur EFIs. Would you be willing to shed some light on this issue? Thank you in advance. Best regards, Bruno. Hello, no changes required for your CPU Ventura don't needs any change, just use the EFI and update de kext. For now, I test it with Sonoma, all works for now. Just the WiFi is disabled and I don't find anything about it on Sonoma. Quote Link to comment Share on other sites More sharing options...
Erik Carlin Posted November 11, 2023 Share Posted November 11, 2023 When you say update kext, what do you mean? I see that folder in the efi file I downloaded but not sure what I do with Kext, ty! Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted November 12, 2023 Administrators Share Posted November 12, 2023 https://www.olarila.com/topic/38117-how-to-update-opencore-and-kexts-easy-way-with-ocat/ Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill [email protected] BTC 1BDzsV4bw3DVCiffFAeNKsdEzqkPXNVrXR ETH BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ PicPay @danielnmaldonado PiX @[email protected] Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Exnos Posted May 8 Share Posted May 8 On 10/18/2022 at 2:17 PM, JeVr0oz said: Hey I tried this and it's not working. All I get is a blank screen. I used your EFI from your Google drives EFI.zip. I extracted it then placed it in the EFI partition and it boots. When I select Install Monterey it starts to load and then it goes black. It's booting and even goes to sleep so it on. The screen is just black. I am using a Display port to HDMI adaptor because this machine only has Display ports so the EFI should already be configured for this. How did you get it working? Quote Link to comment Share on other sites More sharing options...