Jump to content
rositaott

Dell Inspiron 5593 i5-1035G1 OpenCore Bootloader ​​​​​​​

Recommended Posts

Posted (edited)

:help  First of all this is not a tutorial, just created this topic to have better discussion with my current device which have intel 10th Generation Processor. 

After creating USB Installer, got different boot every restart. Sometimes it end up like below;

Pes36WM.jpg

and latest progress is like the one below;

2IWCqiC.png

NoteBook Specs (https://www.dell.com/lt/p/inspiron-15-5593-laptop/pd)

Processor

10th Generation Intel® Core™ i5-1035G1 Processor (6MB Cache, up to 3.6 GHz)

Video Card 

Intel® UHD Graphics with shared graphics memory

NVIDIA® GeForce® MX230 with 4GB GDDR5 graphics memory

Disk Drives:

BC511 NVme SK HYNIX 512G

Samsung SSD 860 EVO 500G

8GB RAM

and lastly the EFI from attached.

Thank you in advance to @MaLd0n  and to our good dev for support and patience, hope I can manage to install macOS in my notebook soon :smile:

Let's go...! :guitar:guitar:guitar

EFI.zip

Edited by rositaott

Share this post


Link to post
Share on other sites
7 hours ago, rositaott said:

BIOS default SATA MODE is RAID change to AHCI

and work?

Share this post


Link to post
Share on other sites
On 8/8/2020 at 10:38 PM, MaLd0n said:

and work?

Not tried yet though, but it will probably work, cause from reading linux will not work with RAID...and the reason I did not change setting yet is need to retain windows due to home learning activities...I will be doing that after class, cause also from reading windows will not boot when change RAID to AHCI, there are some guide not to re-install windows doing that but I need to keep windows at the moment ...

By the way I have wi-fi card BCM94312MCG is it supported in Catalina? Regards & Keep Safe!

Share this post


Link to post
Share on other sites
On 8/8/2020 at 4:38 PM, MaLd0n said:

and work?

HI Mates

Yes.. I have managed to get him to work on Catalina 10.15.6

I have this machine  but with some difference:

 

Processor

10th Generation Intel® Core™ i5-1035G1 Processor (6MB Cache, up to 3.6 GHz)

8GB Ram / 512Gb Nvme

Video Card 

Intel® UHD Graphics with shared graphics memory

NVIDIA® GeForce® MX230 with 2GB GDDR5 graphics memory

 

I was able to successfully install it by making a few minor adjustments, but the fine tuning remains is need, I have tried FIX Grafic card without success

 

Send me Macbook-Pro-Dell-5593

 

Greetings

K.

 

 

Share this post


Link to post
Share on other sites
1 hour ago, kahiser said:

10th Generation Intel® Core™ i5-1035G1 Processor (6MB Cache, up to 3.6 GHz)

DSDT.aml.zip

video patch

Quote
<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>AABSig==</data>
                <key>device-id</key>
                <data>UooAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AAAAgA==</data>
                <key>hda-gfx</key>
                <string>onboard-1</string>
                <key>igfxfw</key>
                <data>AgAAAA==</data>
            </dict>

 

Share this post


Link to post
Share on other sites
18 hours ago, MaLd0n said:

HI Mate,

Thank you very much for the DSDT, I will try to make the fine adjustments today, as there are still important things that do not work.

NO WORK:

- Graphic card, still has the 7Mb, the pach you left me no work, it blocks the start with panic kernel.
- Audio
- WIFI
- Bluetooth

Greetings

K.

Share this post


Link to post
Share on other sites
5 hours ago, kahiser said:

HI Mate,

use this config.plist with dsdt above

config.plist.zip

reboot and extract new sendme

Share this post


Link to post
Share on other sites

remove entry in plist and kext airportbrcmfixup

Share this post


Link to post
Share on other sites
On 9/18/2020 at 1:33 AM, MaLd0n said:

remove entry in plist and kext airportbrcmfixup

Hi mate,

Thanks again for your help..!

 

I did the modification you told me to do, now starts, but as soon as the loading process is finished, it restarts.

I've been doing some tests, and when I delete the registry of the config.plist in DeviceProperties, it starts perfectly but without graphic acceleration with 7MB.

According to the Opencore manual, this should be the correct configuration, but there is something that does not let the equipment start.
I have searched and tried other options without success.

Greetings

K.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...