DSDT patch requests

[Andy123]

Hi,

I try to install Mojave but kernel panics 2 mintues before installation finish.

Thanks for help

Send me A.zip

[MaLd0n]

[ref]Amfkuna[/ref], https://Olarila.com/forum/viewtopic.php?f=62&t=7164

Added in 52 seconds:

use sierra or high sierra if ur processor have a sse4,1

[hulliver]

hulliver, is a aptiomemoryfix problem, is a uefi driver problem, many popl use it again

OsxAptioFix2Drv-free2000.efi.zip

 

Hello Don, now the boot up works fine. The thing that is missing are USB ports on the designare z390 there are several Generation 3 and usb-c ports and Thunderbolt3 like in a new MacMini8,1. that are not usable still. Can you fix this? Attached send me file and overview of USB ports.

 

Send me hollisters-iMacdomain4.zip

[MaLd0n]

[ref]hulliver[/ref], config.plist.zip

 

Added in 1 minute 31 seconds:

use it too

DSDT.aml.zip

[ivandmpk]

One more time my dear friend , please :)

I bought a new graphics card and doing fresh clean install .

Send me Ivans-iMac.zip

[Amfkuna]

[ref]Amfkuna[/ref], https://Olarila.com/forum/viewtopic.php?f=62&t=7164

Added in 52 seconds:

use sierra or high sierra if ur processor have a sse4,1

 

I made mistake in boot arg,

I wrote "-shikigva=60" this is bad

Must be "shikigva=60" without - sign

Now VideoProc enables both codecs

THX MaLd0n

[MaLd0n]

[ref]ivandmpk[/ref], check if work

DSDT.aml.zip

 

Added in 55 seconds:

[ref]Amfkuna[/ref], shikigva=60

[hulliver]

[ref]hulliver[/ref], config.plist.zip

Added in 1 minute 31 seconds:

use it too

DSDT.aml.zip

 

Wow that worked. thank you. How can i update to 10.14.2 or further?

Edited January 19, 2019 by Guest

[MaLd0n]

[ref]hulliver[/ref], just update

[hulliver]

[ref]hulliver[/ref], just update

 

Ok it seems only that you took out my bluetooth that was connected on the internal usb on the board. It is not available anymore. it is usb 2.0. Sorry i did not look well.

[peppsss98]

Hello MaLd0n! I hope you can help me with my patches! I'm trying to install High Sierra on my Notebook and I need patches please...

Specs of my old Asus X556UR-XO346T:

intel core i7-7500U

DGpu: Nvidia GeForce 930MX (2GB)

Gpu: Intel HD Graphics 620

Ram DDR4 4GB

I Get my Acpi files with Clover F4 and I attached my origin.zip for Full patched my DSDT and Clover for disable NVidia DGpu.

Thank you so much!

 

origin.zip

[MaLd0n]

[ref]hulliver[/ref], open ioreg and check if u see bluetooth inside device XHC

Added in 4 minutes 48 seconds:

[ref]peppsss98[/ref], DSDT.aml.zip

if dont work u need check what device nvidia stay

[peppsss98]

[ref]hulliver[/ref], open ioreg and check if u see bluetooth inside device XHC

Added in 4 minutes 48 seconds:

[ref]peppsss98[/ref], DSDT.aml.zip

if dont work u need check what device nvidia stay

Thanks, I tried but it is still rebooting at 75%, nothing changed...tell me what to do please

[pinkertonb95]

Here is my send me file. Just got High Sierra installed Trying to get the battery, HDMI audio, and Audio working.

If you need anything else just let me know.

Thank You.

Send me.zip

[Synerror]

hi can you help me fix all problem ? and how i know if my gpu already qe/ci ?

Send me Pramesaris-MacBook-Pro.zip

[hulliver]

MaLd0n wrote: ↑20 Jan 2019, 01:37

hulliver, open ioreg and check if u see bluetooth inside device XHC

 

Bom dia Don,

i did what you suggested and i did not find any bluetooth inside xhc after the update. By the way i did an update to 10.14.2 and everything fine as you told. I looked around the internet and found somebody having the same motherboard for hackintosh. after everything working for the guy's status was like it can be seen on the first screenshot:

 

 

I found his annotations that i cut short:

 

Status: USB Ports

Mojave seemed to recognise all the USB 2 and USB 3 ports. The four USB 3.0 Type-A ports on the I/O Shield are governed by a USB Hub at HS07 and SS07, so they seem to count as one USB 2 port and one USB 3 port. When we count up all the USB ports on the I/O Shield we get 2 dedicated USB 2 ports, 2 USB 3.1 ports, and 4 USB 3.0 ports on a Hub (these 4 ports count as 1). So we have 5 HS ports and 3 SS ports on the I/O Shield.

And we have 2 USB 3.0 ports on the front I/O panel and a Type-C also on the front. These are an additional 3 HS ports and 3 SS ports. And HS14 is internal Bluetooth.

Sum total: 8 HS ports, 6 SS ports, 1 Blutetooth port (counts as HS port) --- this is a nice total of 15.

This V2 SSDT keeps HS14 port active (Intel CNVi Bluetooth). But if you plan to use a Broadcom WiFi/BT card with the Bluetooth USB cable plugged into the USB 2.0 header on the motherboard (the header is located to the left of FAN_PUMP) then use SSDT-UIAC-DESIGNARE-Z390-V3 instead (copy the .aml file not the .dsl file to CLOVER/ACPI/patched folder).

 

SSDT-UIAC-DESIGNARE-Z390-V3.aml.zip

 

Status: Fully Working / This patch did not work for me

Status: Socket 1 WiFi/Bluetooth card

As expected, Mojave has no support for Intel WiFi/Bluetooth chips so this card does not work.

Status: Does not work (as expected). Will see if a suitable Broadcom card is available or if someone is nice enough to write a driver for this.

OK Broadcom natively Working

Still need to test Continuity/Handoff. However, USB port 14 must be disabled and port 11 must be enabled. This is handled by the attached Custom SSDT SSDT-UIAC-DESIGNARE-Z390-V3. Be careful to copy the .aml file to your CLOVER/ACPI/patched folder. The .dsl file is for reference only -- it provides comments for every port.

Status: WiFi/BT working, but further tests pending.

Update: 12-12-2018: Based on this post, I think this is a done deal.

Status: Fully Working.

 

On my system it looks now like this:

 

 

Before the last patches both port 11 & 14 were active . (I rolled back to see) where as i understand it should be only Port 11 for internal and USB2.

 

 

I attached the last sendme file as well. Por favor give me a fix for the missing port(s) and bluetooth.

Bom domingo para vc

Sendme5.zip

[intraco]

Hi, I hope and you can help me. I need the DSDT for my computer, when it goes into sleep mode when it wakes up it restarts. I have macOS Mojave 10.14.2 many thanks in advance

Specifications

gigabyte GA-H170-D3HP

Itel Core i3-7100

GPU AMD Radeon HD 7970 3GB

RAM DDR4 8GB

Added in 9 minutes 7 seconds:

This is my Clover in case you want to take a look. Thanks again.

DSDT-50460054.aml.zip

CLOVER.zip

[peppsss98]

[ref]hulliver[/ref], open ioreg and check if u see bluetooth inside device XHC

Added in 4 minutes 48 seconds:

[ref]peppsss98[/ref], DSDT.aml.zip

if dont work u need check what device nvidia stay

 

I just reinstalled everything with "CLOVER" of "NOTEBOOK WITH SKYLAKE, KABYLAKE..." and the patches works and I've installed it on my ASUS! So thank you so much! Perhaps I need the VoodooI2C patches on DSDT (I use VoodooI2C and VoodooI2CFTE)..can you please patch DSDT to make touchpad work? Thank you so much!

[onemanosx]

I need the VoodooI2C patches on DSDT

follow preparatory steps here, first. https://Olarila.com/forum/viewtopic.php?f=46&t=8087

Find out if trackpad is I2C device.

[MaLd0n]

[ref]pinkertonb95[/ref], DSDT.aml.zip

Notebooks Useful Links

-Audio

">

-Battery

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

-I2C

https://github.com/alexandred/VoodooI2C

Added in 11 minutes 42 seconds:

[ref]Synerror[/ref], CLOVER.zip

Notebooks Useful Links

-Audio

">

-Battery

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

-I2C

https://github.com/alexandred/VoodooI2C

Added in 1 minute 46 seconds:

[ref]hulliver[/ref], just remove HS11 in uia_exclude flag in boot tab

Added in 1 minute 49 seconds:

[ref]intraco[/ref], DSDT.aml.zip

DSDT.aml.zip

[ph33rz]

System Specifications

Asus Rog Rampage V Edition 10

Core i7 5820k

Nvidia GTX1080

Send me ph33rzs-iMac.zip

[MaLd0n]

[ref]ph33rz[/ref], use our clover folder for x99, reboot and extract new SEND_ME

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[akam78]

Hello

it's been 2 weeks that I try to operate the touchpad,

unsuccessful

can you help me I join the runme file

thank you

[MaLd0n]

[ref]akam78[/ref], DSDT.aml.zip

[peppsss98]

[ref]akam78[/ref], DSDT.aml.zip

 

MaLd0n can you please patch this other DSDT?

Another Asus, but different specs: Asus TP550LD

Cpu: Intel I7-4510u

Integrated Gpu: Intel HD 4400

Discrete Gpu: Nvidia GeForce 820m

Ram: 4gb DDR3

I just need the DSDT patch to disable Nvidia GPU because I'm trying to install High Sierra..thank you so much again!

origin.zip