[Guide] Install/Restore BigSur with Clover

[batmanm0b1e]

21 hours ago, MaLd0n said:

is a easy and temporary procedure  

I need see it on video @MaLd0n it did not work for me. I still need Big Sur can you help please? send me updated files for clover in pm

[lclerte]

On 7/25/2020 at 11:27 PM, suren munoo said:

So I have the Asus MSI H110m Pro VH Mobo, I am booting Big Sur Beta 3 from a 4g internal Hard drive. I created a vanilla usb installer and then from my Catalina I formatted the drive and installed BS onto the new drive. I used the methods from this post below and the pre-made Open Core efi from here and it works. Use the sudo instructions to create your own bootable usb don't download the image it gives issues. 

 

yes , I succeeded to install BigSur4 on my internal SSD...Fine with opencore; but know , I try to use CLOVER with all the guides found on the net ...But not works : 1/ can I use the ACPI folder from the OPENCORE/ACPI to  CLOVER ? 

2/ Can I use the same KEXT folder from OPENCORE to CLOVER ? ?? 

THANKS !!

Usually , this topic should be  ONLY FOR CLOVER ... Thanks !! 😇

On 7/24/2020 at 6:11 AM, macattackjack said:

Okay. I was able to download your EFI.

It is getting further, but still getting stuck. I tried changing the config file, using different drivers, or kexts, different Mac models, nothing helped.

It's now stopping at IOUSBHost Interface.

This Asus Prime A X299 is different than other motherboards. The EVGA X299 Micro was much easier to get working with 10.13, 10.14 and 10.15. I tried updating the bios to 3006 and it brick walled all the systems, as it couldn't even load the clover boot loader. I might try it with this new version and see what happens.

If I may ask, where did you find the EFI you're using?

IMG_9091.JPG.zip 3.17 MB · 7 downloads

I had the same issue resolved by doing MY own  usbport.kext , and my own ACPI...

[suren munoo]

48 minutes ago, lclerte said:

yes , I succeeded to install BigSur4 on my internal SSD...Fine with opencore; but know , I try to use CLOVER with all the guides found on the net ...But not works : 1/ can I use the ACPI folder from the OPENCORE/ACPI to  CLOVER ? 

2/ Can I use the same KEXT folder from OPENCORE to CLOVER ? ?? 

THANKS !!

Usually , this topic should be  ONLY FOR CLOVER ... Thanks !! 😇

I had the same issue resolved by doing MY own  usbport.kext , and my own ACPI...

I tried many nights to get it to work with Clover but failed, got it to work once with standard pre-made clover folder from Maldon but not from beta 2 onwards so I used OC which works just fine, I am happy with OC and doubt I will use Clover again, OC seems to be much more stable anyways.

[kay_alfa]

 can anyone help me to install BigSur4

Mobo : Gigabyte B365 M AORUS ELITE-CF      V-Bios : F2

proci : i3 9100

ram : 16 Gb 2400

vga : Gt 1030 2gb colorful

[MaLd0n]

1 hour ago, kay_alfa said:

vga : Gt 1030 2gb colorful

dont work in mojave+

[kay_alfa]

7 hours ago, MaLd0n said:

dont work in mojave+

ok thanks... just put gt 1030 and try to onbord vga... 

something like that. Can it?

[ويست بوي WEST BOY]

in memory panic stackshot whats that guys stuck in these pls help

[MaLd0n]

On 8/17/2020 at 5:14 AM, kay_alfa said:

something like that. Can it?

Yes

2 hours ago, ويست بوي WEST BOY said:

in memory panic stackshot whats that guys stuck in these pls help

try uncheck devirtualisemmio, try with only essentials kexts, like virtualamsc and lilu

[juniorairton]

Can I do it and update to the latest version using clover?

[MaLd0n]

56 minutes ago, juniorairton said:

Can I do it and update to the latest version using clover?

no

[lclerte]

Hi! How to access to recovery ? when I clic on the icon Recovery 11 , nothing appears ??  ( Big sur beta 4 is OK , opencore 0.6.1 Ok )

(the access to recovery 10.15 of my Catalina is OK )

So , impossible to SIP completely disabled... I tried everything...I need to do it from recovery 11 , ( disable in terminal from installer doesn't work)

What's wrong ?? 

Spec: ASUS desktop MB H110M. ( iGPU intel 630  eGPU Nvidia 1050 not used ) 8GB  i5/7400.  SSD internal SATA 250GB Samsung....

Thanks !!  

[MaLd0n]

1 hour ago, lclerte said:

Hi! How to access to recovery ?

UEFI tab / JumpstartHotPlug=Yes

[raphento]

When restoring the name of the SSD it was (Test). Is there any way to change?

[suren munoo]

8 hours ago, raphento said:

When restoring the name of the SSD it was (Test). Is there any way to change?

Install Intel Power Gadget and after reboot it will change the name to whatever you have named the hard drive in disk utility 

[lclerte]

14 hours ago, MaLd0n said:

UEFI tab / JumpstartHotPlug=Yes

thanks it works !

but ,  in BS public beta 4 installed OK , with  csrutil  disabled and authenticated-root disabled , How to mount read-write my S/L/extentions ?? impossible ? 

I succeeded in mounting to a new volume and then ..copy a kext to S/L/E....ok , but when I try , with hackintool , to rebuild the cache .. impossible 

Thanks !!!

[raphento]

4 hours ago, suren munoo said:

Install Intel Power Gadget and after reboot it will change the name to whatever you have named the hard drive in disk utility 

Did not work. Even renaming continues to test in the finder.

[macattackjack]

I finally got the Beta 4 image, and it still does not boot on the Asus X299 Prime-A, i7-9800X, EVGA GT710. It freezes after PCI begin, or apfsload, depending on what kexts. I replaced the kexts in the image with newer ones or ones that I know work with this motherboard for Catalina. Nothing helped.

Has anyone gotten it to work with a X299 chipset?

[suren munoo]

@MaLd0n I updated to Beta 5 just now and it updated and booted fine but I noticed that my eternal ports show cable unplugged though it was working properly in beta 4 so it means I have no internet with BS anymore, do you have any fix, I have Realtek RTL8168H/8111H PCI Express Gigabit Ethernet: with the latest up to date kext( I think)

EDIT: I managed to fix it, don't worry

Edited August 21, 2020 by suren munoo

[ovidoi]

Hi my friend, i wish to install Big Sur with clover because O.C. doesn't boot on my main board but clover boot on efi and uefi. When i try to install Big Sur public release bootloader stop on ioapic, see my attach. I try many times and combines configuration but nothing, clover 5120 K.P. on AppleIntelCpupowermanagement on all os's installed on my computer but clover 5121 work good. I install all distro Mac Os and work very good but Big Sur refuze to install, please any help, thank you. Attach my config.

My hardware is Cpu i3 530 support sse4.2, Mb dh55tc, ram 4GB, video Nvidia gforce 210, ssd Adata su650 120GB.

 

boot.zip config.zip

Edited August 22, 2020 by ovidoi

[MaLd0n]

2 hours ago, ovidoi said:

Cpu i3 530 support sse4.2, Mb dh55tc, ram 4GB, video Nvidia gforce 210, ssd Adata su650 120GB.

very old hardware

[ovidoi]

2 hours ago, MaLd0n said:

very old hardware

Yes, is old but work good, need more ram. But why stuck on acpi?

 

Edited August 22, 2020 by ovidoi

[MaLd0n]

50 minutes ago, ovidoi said:

Yes, is old but work good, need more ram. But why stuck on acpi?

if u have one system like catalina, create one folder with full dsdt patched, good usb injector, etc and this work in bigsur

[ovidoi]

15 hours ago, MaLd0n said:

if u have one system like catalina, create one folder with full dsdt patched, good usb injector, etc and this work in bigsur

Ok, thank you! i will try.

[MaLd0n]

On 7/5/2020 at 2:17 AM, pcit said:

HI dear

for now use opencore

[Guizy]

@MaLd0n, meu Dell 7460 funciona perfeitamente no Big Sur Beta 1, porém ao atualizar para o Beta 4/5 ou Public Beta ocorre este erro:

 

IMG_6470.jpg.zip