Hackintosh OpenCore Vanilla Guide, Step by Step

[lukakeiton]

1 hour ago, Guillep84 said:

Hi MaLd0n

The dsdt you generated for clover does not work for me with opencore.
Currently I am using this configuration but when I start the screen it remains black but I turn on the power and it turns on

https://filebin.net/jwpu4vuv707ohbn4

thanks.

 

 

I generate my own DSDT, for me it works. Have you installed the modded bios? I use OpenCore. Your DSDT is not the same as mine.

Edited September 9, 2020 by lukakeiton

[sabertooth]

23 minutes ago, lukakeiton said:

I generate my own DSDT, for me it works. Have you installed the modded bios? I use OpenCore. Your DSDT is not the same as mine.

how did you generate your DSDT?

I know you used maciasl, but how you did it?

I have an Asus prime x570 pro

and 3900x + rx580

[lukakeiton]

32 minutes ago, sabertooth said:

how did you generate your DSDT?

I know you used maciasl, but how you did it?

I have an Asus prime x570 pro

and 3900x + rx580

You need to extract it with OpenCore or windows, then you have to disassembly it. Then patch it and assembly again. For your specs, DSDT is not needed. If you are interested on Big Sur, take a look on this!

 

[Guillep84]

2 hours ago, lukakeiton said:

I generate my own DSDT, for me it works. Have you installed the modded bios? I use OpenCore. Your DSDT is not the same as mine.

Hello,
I'm booting from usb, since I don't want to lose clover until I have it properly set to opencore.
I know that your dsdt is for your config but I followed the steps to generate my opencore configuration without dsdt but it did not work, it started.
https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/
With your configuration it starts and even the webcam works.

What I can do?
Thank you

[lukakeiton]

10 hours ago, Guillep84 said:

Hello,
I'm booting from usb, since I don't want to lose clover until I have it properly set to opencore.
I know that your dsdt is for your config but I followed the steps to generate my opencore configuration without dsdt but it did not work, it started.
https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/
With your configuration it starts and even the webcam works.

What I can do?
Thank you

I took a look to your DSDT, it is not patched at all (DSDT is full solution unless bios update). So, you are using SSDTs or Clover config, but I don't use Clover for years. I suggest you if my configuration works for you, use it! Change serial number and add the kexts you need.

Edited September 10, 2020 by lukakeiton

[maldini237]

On 9/8/2020 at 4:49 PM, MaLd0n said:

this way is just for installation. after that need start a fine tune

i did installation fine, the problem after installation it stuck if boot in normal mood but boot without problems in safe mode

Edited September 10, 2020 by maldini237

[MaLd0n]

4 hours ago, maldini237 said:

i did installation fine, the problem after installation it stuck if boot in normal mood but boot without problems in safe mode

reproduce this problem and post one photo

[Guillep84]

On 9/10/2020 at 12:50 AM, lukakeiton said:

I took a look to your DSDT, it is not patched at all (DSDT is full solution unless bios update). So, you are using SSDTs or Clover config, but I don't use Clover for years. I suggest you if my configuration works for you, use it! Change serial number and add the kexts you need.

Hello, I'm still using your configuration (change the serial and add my kexts) since it is impossible for me with my DSDT.
The DSDT was generated by MaLd0n in this link and it works fine with clover:
https://www.olarila.com/topic/923-dsdt-patch-requests/page/528/?tab=comments#comment-91319

Then I modify it to show the battery:
https://www.olarila.com/topic/5673-guide-laptop-battery-indicator-the-dsdt-patching-horror/page/11/?tab=comments#comment-103422

Some questions:
- Could you install big sur?
- When I finish loading macos catalina, before the password, the laptop screen turns off, I have to press the power button to turn on the screen, how can I solve it?

I cleaned up the entire boot and relaunched RunMe:
http://s000.tinyupload.com/index.php?file_id=06296672587219584671
Thank you.

[MaLd0n]

15 minutes ago, Guillep84 said:

The DSDT was generated by MaLd0n in this link and it works fine with clover

if u use opencore need patch again and after that work in clover and opencore

[lukakeiton]

Just now, Guillep84 said:

Some questions:
- Could you install big sur?
- When I finish loading macos catalina, before the password, the laptop screen turns off, I have to press the power button to turn on the screen, how can I solve it?

- It is a future proyect. I am on others now.

- Did you add -wegnoegpu in boot args?

As @MaLd0n said, you need to patch it again. If you are going to use opencore, i suggest you use ssdt.

[Guillep84]

15 minutes ago, lukakeiton said:

- It is a future proyect. I am on others now.

- Did you add -wegnoegpu in boot args?

As @MaLd0n said, you need to patch it again. If you are going to use opencore, i suggest you use ssdt.

-wegnoegpu

Yes and also removed it and it had no effect

1 hour ago, MaLd0n said:

if u use opencore need patch again and after that work in clover and opencore

Ok, I'm going to try to generate the ssdt by following:
https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

Thanks

[MaLd0n]

4 hours ago, Guillep84 said:

Ok, I'm going to try to generate the ssdt by following

post one full dump here

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

[brasileirojr]

Hey, I'm trying to install mac os big sur but, when i boot to the bootable drive, I always end up with a kernel panic, no matter what I do 

here the photo and the config.plist file

 

 

 

config.rar

[MaLd0n]

1 hour ago, brasileirojr said:

Hey

first try with minimal kexts, only lilu and virtualsmc with no plugins

[Guillep84]

12 hours ago, MaLd0n said:

post one full dump here

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

Hi MaLd0n

http://s000.tinyupload.com/index.php?file_id=57309385123474026029

Thanks.

[brasileirojr]

9 hours ago, MaLd0n said:

first try with minimal kexts, only lilu and virtualsmc with no plugins

I did this and now there is an error:

How do I solve it?

• smcGetKeyInfo Error: Received error 0x84 when getting key info for ALRV
• smcReadKey Error: Received error 0x84 when getting key info for MSLD 
• smcReadKey Error: Received error 0x84 when getting key info for ALV0

[huyanmay95]

On 8/25/2020 at 3:26 PM, MaLd0n said:

u need extract one sendme with config.plist above

@@ I don't understand this solution

[MaLd0n]

3 hours ago, Guillep84 said:

Hi MaLd0n

u need extract with opencore running

1 hour ago, brasileirojr said:

I did this and now there is an error:

u can ignore this error. the problem is other. or sata or usb

[brasileirojr]

18 minutes ago, MaLd0n said:

u need extract with opencore running

u can ignore this error. the problem is other. or sata or usb

It gets stuck on this error

[MaLd0n]

2 minutes ago, brasileirojr said:

It gets stuck on this error

prepare one good folder with catalina with full dsdt patches, the really good folder and after that try big sur

[Guillep84]

2 hours ago, MaLd0n said:

u need extract with opencore running

u can ignore this error. the problem is other. or sata or usb

Hi, I'm sorry, I didn't know.

Generated with opencore:
http://s000.tinyupload.com/index.php?file_id=00675128906856469588
Thank you.

[MaLd0n]

20 minutes ago, Guillep84 said:

Hi, I'm sorry, I didn't know.

remove xosi acpi patch rename, reboot and extract new

[Guillep84]

15 minutes ago, MaLd0n said:

remove xosi acpi patch rename, reboot and extract new

Ok, removed, rebooted and run RunMe

http://s000.tinyupload.com/index.php?file_id=04118398862526089541

Thanks

[MaLd0n]

25 minutes ago, Guillep84 said:

Ok, removed, rebooted and run RunMe

ur dsdt have many patches

DSDT.aml.zip

 

[Guillep84]

20 hours ago, MaLd0n said:

ur dsdt have many patches

DSDT.aml.zip 18.55 kB · 2 downloads

 

Hello,
DSDT is working properly, thank you very much.
I am trying to configure everything:
- I still have the problem that when I turn it on the screen turns off, I have to press the power button to turn it on, I have the intel HD4000 and nvidia 630m.
- The wifi does not detect it, the icon appears but it does not find any, if I put the injection kext it does not boot.
- I don't get the battery.

For the rest, everything ok.
I leave my config.plist in case you see anything.

Thank you.

config.zip