Hackintosh OpenCore Vanilla Guide, Step by Step

[MaLd0n]

Hackintosh OpenCore Vanilla Guide, Step by Step, how to, tutorial

-Support Olarila Vanilla Hackintosh by making a donation HERE

-About Premium Users you can check HERE

-Problems with Paypal HERE

-Installation Guide HERE

-Hackintosh EFI folders HERE

-Hackintosh USB Remap HERE

-How to update OpenCore and Kexts HERE

-Guides and Tutorials HERE

 

Some Basic Information

-Bios/UEFI configuration check HERE

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

 

a) If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

b) You can request one full ACPI solution HERE and Premium Users HERE

c) After installation you need remove unnecessary files like unused Lan kexts

d) Remove agdpmod=pikera bootarg if you have RX550, RX560, RX570 and RX580 

e) If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

f) Users with IGPU need change SMBIOS and create video patch

 

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux) HERE

1b) How to create USB Installer (Mac) HERE

 

Step 2 - Burning Olarila Images with Balena Etcher with Windows, macOS or Linux

2a) Download Link HERE

 

Step 3 - Downloading correct EFI folder for your hardware with Clover or OpenCore

3a) OpenCore and Clover HERE

3b) OpenCore MOD HERE

 

Step 4 - Copying EFI folder to USB EFI partition with macOS or Windows HERE

 

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

 

Step 6 - Copying EFI folder to SSD EFI partition after Installation HERE

 

Step 7 - Starting a real fine tune with full ACPI solution. About Premium and Donators users check HERE

 

Step 8 - USB Port Mapping HERE

 

Step 9 - Audio Solution HERE

 

Step 10 - Dual Boot with OpenCore and Full ACPI Solution HERE

 

Step 11 - How to update OpenCore bootloader HERE

 

Step 12 - How to generate SMBIOS and Serial on Hackintosh HERE

 

Step 13 - Mobile Intel HD Graphics HERE

 

Step 14 - Run Olarila Repair one time HERE

 

Step 15 - Olarila Guides and Tutorials HERE. More than a hundred tutorials for your Vanilla.

 

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

 

We're all here to have fun and learn from each other! That's all Folks!

[Toddynho]

Belo Post MaLd0n. Conseguir fazer a instalação só estou na luta para a minha setinha do mouse funcionar, testei a DSDT que ja uso no meu Hackintosh com Clover só que de alguma forma não funciona. Estive testando hotpatch e também sem sucesso... Tirando isso o sistema funciona bem mais rápido no Open Core.

[MaLd0n]

31 minutes ago, Toddynho said:

Belo Post MaLd0n. Conseguir fazer a instalação só estou na luta para a minha setinha do mouse funcionar, testei a DSDT que ja uso no meu Hackintosh com Clover só que de alguma forma não funciona. Estive testando hotpatch e também sem sucesso... Tirando isso o sistema funciona bem mais rápido no Open Core.

vai ter de patchear pro OpenCore

[RandomTech7]

Hi, thanks for detailed and useful tutorial

I managed to boot my CoffeeLake 8700K and 5700XT but have no Audio, in System Settings/ Audio all sound effects are clickable but no sound from Internal Speakers, only buzzing sound, please help.

[MaLd0n]

7 minutes ago, RandomTech7 said:

I managed to boot my CoffeeLake 8700K and 5700XT but have no Audio, in System Settings/ Audio all sound effects are clickable but no sound from Internal Speakers, only buzzing sound, please help.

https://www.olarila.com/topic/6074-guide-easy-audio-solution-with-applealc-clover-and-opencore/

[RandomTech7]

Thanks! now audio works.

Another question, I need my custom fakesmc and AMD GPU monitor kexts for OpenCore, can I simply transfer them from Clover EFI Folder?

[MaLd0n]

1 hour ago, RandomTech7 said:

Another question, I need my custom fakesmc and AMD GPU monitor kexts for OpenCore, can I simply transfer them from Clover EFI Folder?

test and check if work

[RandomTech7]

15 minutes ago, MaLd0n said:

test and check if work

I tested but didn't work, I have a lot modification in clover and I'm noob to transfer them to opencore

[MaLd0n]

10 minutes ago, RandomTech7 said:

I tested but didn't work, I have a lot modification in clover and I'm noob to transfer them to opencore

extract send me and send me ur efi folder too

[RandomTech7]

8 hours ago, MaLd0n said:

extract send me and send me ur efi folder too

Here you go sir,

in EFI Clover:

1. Devices/Properties to undervolt 5700XT and better fan curve.

2. Custom fakesmc and radeon monitor kexts to show GPU temperatures.

3. Custom SSDT.aml+dAGPM.kext for GPU to double the OpenCL and Metal performance. 33,000 to 60,000 score in Geekbench5.

 

Send me Navis-iMac-Pro-OpenCore.zip EFI Clover.zip

[MaLd0n]

1 hour ago, RandomTech7 said:

Here you go sir,

a fine tune DSDT.aml.zip

if u use dual boot u can use my ssdt from here, ssdt is never is a full solution but work good

https://www.olarila.com/applications/core/interface/file/attachment.php?id=27503

i'll test fakesmc in oc, but i think dont work

[Kyaalod]

Question.

1. I can used my OC config then just delete the SSDT from dortania and add DSDT patch? 
2. If they update the OC from 0.5.9 to 0.6.0 do i need to update it or just wait for your update? 
Thanks!

Stuck here when i tried to delete all my SSDT from OC files and pasted your SSDT then applied the patch

https://imgur.com/a/Z8GXRiB

Edited June 23, 2020 by Kyaalod

[olarilal]

hi and thanks for the guide

But when  i boot with the flash i get this error in the attached picture

 

boot error.zip

[MaLd0n]

On 6/23/2020 at 6:52 AM, Kyaalod said:

Question.

extract one sendme
https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

On 6/23/2020 at 9:42 AM, olarilal said:

hi and thanks for the guide

sound like a booter quirks

go to booter tab and test some things

[RandomTech7]

On 6/23/2020 at 9:40 AM, MaLd0n said:

a fine tune DSDT.aml.zip

if u use dual boot u can use my ssdt from here, ssdt is never is a full solution but work good

https://www.olarila.com/applications/core/interface/file/attachment.php?id=27503 1.7 kB · 16 downloads

i'll test fakesmc in oc, but i think dont work

DSDT very good but I use Windows for gaming and no sound in Windows now 

I gonna use olarila-ssdt to see results.

Custom fakesmc + radeon monitor kext are working for for OC 

[MaLd0n]

1 hour ago, RandomTech7 said:

I gonna use olarila-ssdt to see results.

if u boot into windows via OpenCore, bootloader inject edited table in other system, is a very crazy non-sense thing, but i think devs fix it soon

to avoid problem in this case and stay with full patch need use a bootkey or ssdt. ssdt from this topic is good, not full solution but work fantastic too

1 hour ago, RandomTech7 said:

Custom fakesmc + radeon monitor kext are working for for OC 

Nice!

[Kyaalod]

On 6/24/2020 at 11:13 PM, MaLd0n said:

extract one sendme
https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

sound like a booter quirks

go to booter tab and test some things

Here Sir. SENDME.ZIP

Running Both Mac/windows on a single SSD

Thank You!

Edited June 27, 2020 by Kyaalod

[xrimarx]

Hi MaLd0N,

Need your help, please. I was trying getting listed all pci devices in sysinfo but I can´t get it done in OC.

Graphics cards (HD630 & RX580), ethernet and pcie bt/wifi card are not listed in pci.

Radeon RX580 is listed in slot "Airport" in Graphics/Displays section.

 

this are the changes I made to your files:

- created new entry in dsdt for getting 2ºnvme using "Apple SSD Controller", and not generic, copying your patch

- in dsdt _SB.PCI0.LPCB.EC _DSM  changed pci8086,a306 to pci8086,a305 as this is the correct device id. Now chipset is listed as Z390 Chipset LPC/eSPI Controller

- added device properties in config.plist for IGP HD 630, as it was recognized as platform-id 3E910003 and correct one seems to be 3E920003

 

Send me

thank you!

 

PD: I have tested your EFI & DSDT from here because dsdt is very much the same, but no display output with monitor on DisplayPort on login. I later put WEG in kext folder and can get to login screen, so where is the trick to run without WEG?? Your card is a 590 !!

Even with WEG graphics cards not listed in PCI. Intel Ethernet card yes.

---

z390 gaming x f10c | i7-8700 | RX580 Pulse

captures.7z

Edited June 28, 2020 by xrimarx
trying yor BigSur EFI&DSDT

[masmaerz]

hi @MaLd0n can you help to touch my configuration for more stable,  I send my configuration that I made in BigSur

thanks for your kindness

 

 

 

Send me picos-iMac.zip

Edited June 28, 2020 by masmaerz

[MaLd0n]

On 6/26/2020 at 10:32 PM, Kyaalod said:

Here Sir. SENDME.ZIP

DSDT.aml.zip

On 6/28/2020 at 3:02 AM, xrimarx said:

Hi MaLd0N,

Insert a little _dsm with generic infos

On 6/28/2020 at 4:03 AM, masmaerz said:

hi @MaLd0n can you help to touch my configuration for more stable,  I send my configuration that I made in BigSur

DSDT.aml.zip

[masmaerz]

wow .. thank you sir, all my respect 

 

 

[xrimarx]

Hi,

Inserted _dsm with only slot property to GFX0 and PEGP but nothing happens. "Built In" to GFX0 and "Slot-1" to PEGP.

So, UHD 630 doesn´t show in PCI list, and RX 580 only shown in Graphics/Displays with slot "AirPort"

Do I have to add more properties to _dsm ?

 

more testing:

Deleting "Name (_SUN, One)" in both devices

fixed _dsm with proper end (Buffer (One) .... ) and mixed results:

-with _dsm in GFX0 (igpu) "Built In" -> ACPI Error in boot

-only with _dsm in PEGP "Slot-1" or "Built In", can boot. Not listed in PCI devices, and no slot info in Graphics/Displays and Ioreg.

 

I don´t know, i´m using an imac19,2 smbios with headless igpu so maybe this is the normal slot naming for this config (both gpus as "AirPort").

If I have the chance to see this data in friend´s real iMac i will compare info.

Anyway, not important, so don´t waste your time here.

thanks for all!!

Edited July 2, 2020 by xrimarx
new testing

[Volneix]

Boa noite @MaLd0n

Meu caro, parabéns pelo tutorial. Finalmente consegui fazer. Infelizmente muitas coisas pararam de funcionar, outras ficaram perfeitas. Você pode novamente fazer o patch DSDT pra mim? (você já fez pro Clover). Desde já, muito obrigado.

https://drive.google.com/drive/folders/1-Mj2QOU5R8UTNJkz7oFw0eAJh_4qGpg4?usp=sharing

Envio via Google Drive pois o arquivo ficou maior que o site suporta.

Abraço.

[luky53]

Hi MaLd0N,

Please if you look at my files what is wrong that macOS Catalina with OpenCore refuses to load.
I made OpenCore as instructed on the Olaril page.

Thanks a lot in advance.

Start PC

EFI.zip My_PC.txt.zip

[dewazildjian]

hi @MaLd0n my CPU cannot available in this list https://opencore.slowgeek.com/

Intel Core i3 540 3,7 Ghz clarkdale

Would you tell me how to installed opencore to my CPU?