Jump to content
artur-pt

OS X 10.8 Mountain Lion GM installation

Recommended Posts

My hardware is;

Asus P8P67 EVO INTEL P67 (B3) LGA1155 DDR3 USB3 SATA3 ATX, INTEL Core i7-2600K LGA 1155 8MB 3.4GH, Cooler Master RC 692 Advance II, Seasonic 750W, WD Caviar Green 2 TB IntelliPower 64 MB Ön Bellek 3,5" SATA II DISK, Sapphire ATI HD6950 New Cooler 2GB DDR5 256 Bit PC,Sunbeam Tuniq Tower 120 Extreme Intel/Amd, Geil Plus 16GB DDR3 1600Mhz CL9 Low Voltage, LG GH22NS50 SATA DVD-RW


I cant send a photo vrbose mode cause I cant install DP4..

Im using USB method I boot from USB language screen coming I select language then click next select hardrive and click install error coming.

Link to comment
Share on other sites

Im saying I didnt make it install DP4 and got an error before starting to install you saying remove ATI6000Controller??? I you hearing to me? How can I remove ATI6000Controller even I dont start to install?


My all HD epmty I trying to clean install to DP4 when I start to install Im getting error?

Link to comment
Share on other sites

hi


are u reading to me ? if u don't know, dont speak what u don't know


from the installer in s/l/e


what kind of image are u installing ?


man...


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

Hi artur,

i installed ML dp4 in my pro book laptop, there was no difficulty at all but the colour are weird like:

the blue is not blue but purple blue, yellow is golden yellow

I have intel HD 3000 kext files, do you think if i delete intel HD 4000 kext files (2files) will be ok or ML will be unstable!!


Thank you in advance artur.

Link to comment
Share on other sites

hi


i think u problem is not related to that


hd4000 is for ivy cpu


so if u dont have a ivy cpu that kexts are not loaded


what i can say about that is


for the intel hd work good


use in the dsdt the patch dual link if u lcd is above 1366x768


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

hi


the intel hd 4000, is not yet well supported


use last chimera to boot


and will see the hd 4000



ivy is all experimental


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

:(


I have a Kernel Panic in verbose mode....

IOPciFamilyKext..dont read


img0252vv.jpg

 

Hey, I'm getting the same error. Do you know how you fixed it?

I followed the normal procedure.. Previously this had happened to the install USB but I fixed it somehow, I think it was after adding NullCPUManagement.kext but it is not working for an installed copy which gets the same error..

Kernel version is set as 11.0.0.. This is wrong? Help!


EDIT: Nevermind I got it to work, just had to start from scratch..

Link to comment
Share on other sites

I've installed ML GM yesterday and everything was working great (Network, Graphics, Sound) till this morning. First, I did remove AppleHDA.kext and installed VoodooHDA.kext. This morning I lost the sound. Suddenly all my Output in System Preferences turned to Digital Out. Before there was one LineOut which i used for the sound. I've never had this problem before. I really appreciate any help.

Gigabyte Z490 - Vision G

Intel  Core i7-10700K

Saphire Radeon Pulse RX 580 4Gb

Corsair Vengeance RGB PRO 32GB (2x16GB) DDR4 3600 C18

Samsung SSD EVO 860 500GB

Corsair HX750 80Plus Platinum

Link to comment
Share on other sites

Edit Info.plist of VoodooHDA and specify ID of motherboard audio (IOPCIPrimaryMatch) http://Olarila.com/forum/viewtopic.php?f=18&t=454

-Donations-

PayPal HERE - Stripe HERE - BuyMeaCoffee HERE - Mercado Livre HERE

Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com

Premium Users HERE - Problems with Paypal HERE

xcd5u2Y.png

Link to comment
Share on other sites

Thank you very much for reply, I'll try to do that.

Gigabyte Z490 - Vision G

Intel  Core i7-10700K

Saphire Radeon Pulse RX 580 4Gb

Corsair Vengeance RGB PRO 32GB (2x16GB) DDR4 3600 C18

Samsung SSD EVO 860 500GB

Corsair HX750 80Plus Platinum

Link to comment
Share on other sites

Edit Info.plist of VoodooHDA and specify ID of motherboard audio (IOPCIPrimaryMatch) http://Olarila.com/forum/viewtopic.php?f=18&t=454

 


Sorry but i have no idea which ID i need from this list. Can you please help with this?


http://cl.ly/image/1h3w1o394745


I have changed from IOPCIClassMatch to IOPCIPrimaryMatch but don't know which ID and vendor I need


UPDATE: Ok, I've downloaded the Voodoo.kext from the link you posted. Removed Voodoo.kext from Lib/Ext and installed the downloaded one. I got the sound back. Now I have to backup that because I'm afraid it will happen again. Thank you very much. Even, I don't understand how that can happen. Sound was working all day and suddenly was gone...


Thank you...

Edited by Guest

Gigabyte Z490 - Vision G

Intel  Core i7-10700K

Saphire Radeon Pulse RX 580 4Gb

Corsair Vengeance RGB PRO 32GB (2x16GB) DDR4 3600 C18

Samsung SSD EVO 860 500GB

Corsair HX750 80Plus Platinum

Link to comment
Share on other sites

0x293e8086

 

I made a copy of Info.plist with all the changes in case something goes wrong again.


Once again, thank you very much for your help.

Gigabyte Z490 - Vision G

Intel  Core i7-10700K

Saphire Radeon Pulse RX 580 4Gb

Corsair Vengeance RGB PRO 32GB (2x16GB) DDR4 3600 C18

Samsung SSD EVO 860 500GB

Corsair HX750 80Plus Platinum

Link to comment
Share on other sites

Hi,

me again :).......well, everything is working great but i just found out that these folders (etc,tmp,var) are shortcuts and they should be hidden and inside /private folder. I've checked and they are. Can I just delete them?. And "cores" folder was not there yesterday either. It's empty. Network too.


Thanks....


http://cl.ly/image/2l3D2U3Y2e3w

Gigabyte Z490 - Vision G

Intel  Core i7-10700K

Saphire Radeon Pulse RX 580 4Gb

Corsair Vengeance RGB PRO 32GB (2x16GB) DDR4 3600 C18

Samsung SSD EVO 860 500GB

Corsair HX750 80Plus Platinum

Link to comment
Share on other sites

Hi artur-pt,

It seems we have same configuration in our computer. My sound isn't working after installing Mountain Lion. I too have Alc272. How did you manage it to work?Also, I used unishit method to install ML but wont recognize my graphics card. Graphics card run fine with Chameleon after internal lcd forced edid.


My Elantech trackpad works fine when I boot using unishit USB but wont work when booting through Chameleon!!! I copied all kexts from Extra/Extension folder from unishit to Chameleon but no success? any suggestion?

eMachines E730G

Intel Core i3-350M, 3 GB DDR3, ATI Mobility Radeon HD5470,Broadcom Netlink Gigabit Ethernet BCM 5788, Realtek ALC272, Elantech PS/2 TouchPad

Link to comment
Share on other sites

hello


i use dsdt injection for alc272 and apple hda


http://www.osx86.net/downloads.php?do=file&id=2526


this one


good hack

Hi,Thanks for tips. The problem with dsdt is that I could not compile dsdt last time so Mald0n compiled it for me. So even if I inject for alc272 there is no gurantee that I can re-compile it successfully.


However, sound was working flawlessly in OS X Lion. Can I use the same kext for ML?

If I have to use dsdt injection, can you give me a link of dsdt injection tutorial?

Have you also tried to connect your computer with TV using HDMI? IF yes, how did you manage it? I get black screen after connecting HDMI cable with TV.

sorry for asking lots of question.

eMachines E730G

Intel Core i3-350M, 3 GB DDR3, ATI Mobility Radeon HD5470,Broadcom Netlink Gigabit Ethernet BCM 5788, Realtek ALC272, Elantech PS/2 TouchPad

Link to comment
Share on other sites

I just downloaded the RAW file and make a bootable usb using suse studio writer....it was boot properly and tryd the root command

-v (verbose boot)

-x (safe)

-s (single user)

-F (cache) mode.

and also tryd

GraphicsEnabler=no (disable graphics card drivers)

USBBusFix=yes (to fix all problems with USB devices)

but it's not wotking.......please help me to resolve the issue......



it stops ........please bare with me for limited picture quality....


please find the screen shot...

[attachment=2]IMG_20121002_215036.jpg[/attachment]

-----------------------------

[attachment=1]IMG_20121002_215127.jpg[/attachment]

-------------------------------

[attachment=0]IMG_20121002_235404.jpg[/attachment]

-------------------------------



i have Dell d630c laptop with

c2d 2.0 processor

2 Gb of ram

80 GB of HDD

Nvidia graphics


thanks in advance.

Link to comment
Share on other sites


Hey, I'm getting the same error. Do you know how you fixed it?

I followed the normal procedure.. Previously this had happened to the install USB but I fixed it somehow, I think it was after adding NullCPUManagement.kext but it is not working for an installed copy which gets the same error..

Kernel version is set as 11.0.0.. This is wrong? Help!


EDIT: Nevermind I got it to work, just had to start from scratch..

 

Hey, I'm getting the same error. Do you know how you fixed it?


---------------------------------------------------------------------------


I just downloaded the RAW file and make a bootable usb using suse studio writer....it was boot properly and tryd the root command

-v (verbose boot)

-x (safe)

-s (single user)

-F (cache) mode.

and also tryd

GraphicsEnabler=no (disable graphics card drivers)

USBBusFix=yes (to fix all problems with USB devices)

but it's not wotking.......please help me to resolve the issue......



it stops ........please bare with me for limited picture quality....


please find the screen shot...

[attachment=2]IMG_20121002_215036.jpg[/attachment]

-----------------------------

[attachment=1]IMG_20121002_215127.jpg[/attachment]

-------------------------------

[attachment=0]IMG_20121002_235404.jpg[/attachment]

-------------------------------



i have Dell d630c laptop with

c2d 2.0 processor

2 Gb of ram

80 GB of HDD

Nvidea graphics


thanks in advance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





×
  • Create New...