Z390 Designare +9900K Can't boot with igfx

[aarslan419]

Hi i have Gigabyte Z390 Designare Motherboard, 9900K CPU and ROG-STRIX-2070S-O8G Graphics Card.
I know that Nvidia Graphics Cards are not supported on MacOS. So i wanted to use internal graphics instead.
I tried a lot of patches and a lot of success build's efi folders to boot with igfx. But never boots. Ironically every efi folder works with Nvidia Card to boot successfully. But without driver support it is useless you know. One of the efi folders resulted differently. I got an acpi error with the words _STA and .TZ or something like that. But just one of them resulted like this. Every other one results like in the photo.
You can see the problem that i face in the photo that i attached. (Boot failed : will sleep for 10 seconds before exiting...)
Any help is appreciated. Thanks in advance.

20200420_101159.jpg.zip

[MaLd0n]

use this patch and -wegnoegpu

Quote

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>enable-hdmi20</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>EgAAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BgAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>EgAAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>EgAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
            </dict>

 

[aarslan419]

As i was waiting i decided to make a fresh install with olarila image and i used run.me app. Now again i can boot with nvidia gpu and i don't get the previous error with igpu. It just passes that screen. But a new problem occurred. After that screen passes i get this new one (photo) and pc reboots itself.

 

20200422_013333.zip

[aarslan419]

I applied the patch that you provide to my recent situation and now it booted but no usb device is working including mouse keyboard etc. What should i do? Thanks for the previous step by the way.

I realized that i forgot to add -wegnoegpu to boot arguments. Now i added it on clover options and it seems boot stuck at PCI configuration begin.

Edited April 21, 2020 by aarslan419

[MaLd0n]

11 minutes ago, aarslan419 said:

I applied the patch that you provide to my recent situation and now it booted but no usb device is working including mouse keyboard etc. What should i do? Thanks for the previous step by the way.

have one tread here about this mobo, check there

https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/

 

[aarslan419]

I used your efi folder before and i got no boot. Actually i used 15 different EFI folders approximately with no luck. The patch that you provide let me to boot with igfx for the first time. I am extremely newbie to do something by myself. Would you be so kind to solve my vital problems to boot fundamentally operational os x environment?

For now i flashed your efi folder to a new usb stick and i used the patch on it. Now im getting reboots after this screen (photo).

 

20200422_030000.zip

[MaLd0n]

Extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here

[aarslan419]

Thank you.

Here it is.

I made this while i booted to clover screen with usb which includes your efi folder.

F4 Files.zip

[MaLd0n]

delete ur efi folder and paste new into efi partition

http://s000.tinyupload.com/index.php?file_id=87606732354603531801

[aarslan419]

I did and system keeps rebooting itself. On the second boot there is a line like "system rebooted after kernel panic" 

I took a photo of the last screen that i saw.

But i saw that lines a lot of times before.

No arguments are initialized for method _STA

ACPI Error : Method Parse execution failed tz.tz10._sta

You can see full lines in the photo.

I appreciate your help. Thanks.

20200422_1111512.zip

[MaLd0n]

create ur video patch with hackintosh

use -igfxvesa to boot into system

[aarslan419]

1 hour ago, MaLd0n said:

create ur video patch with hackintosh

use -igfxvesa to boot into system

what do you mean by " create ur video patch with hackintosh" ? if you mean the patch that you gave me at the beginning its already there. (forgive my ignorance)

i used -igfxvesa now and verbose screen stuck at

HID: Legacy shim 2

RIC: Only single RAM bank (128 bytes) (second try stuck here)

SMCRIC: start 

000001.7 ( first stuck here)

I attached stuck screen photo.

20200422_133843.zip

[aarslan419]

Still waiting for help 😔

[MaLd0n]

1 hour ago, aarslan419 said:

Still waiting for help 😔

check hackintool/menu/systemconfigs/patch

[aarslan419]

1 hour ago, MaLd0n said:

check hackintool/menu/systemconfigs/patch

1- I mounted my booting efi drive while i booted over nvidia with the efi folder that you provided.

2- I used hackintool/menu/systemconfigs/patch/Gigabyte/Designare Z390 [9900K_ZISQO]

3- I go to file/export/bootlader config.plist

4- I overwrited the patched config.plist to my booting efi partition.

Result : system still rebooting itself with igfx

am i doing something wrong?

[aarslan419]

Update:

I had some progress here.

I think system booted somehow but first i had a broken picture of verbose screen.

I tried plug out the display cable and plug it back. I saw the mac os mouse pointer on a completely black screen.

Then i clicked with mouse and mouse pointer is gone. Just a black screen. No reboots.

EDIT: a photo is attached.

20200423_090226.zip

Edited April 23, 2020 by aarslan419

[aarslan419]

Quote

<key>PciRoot(0x0)/Pci(0x1F,0x3)</key>

<dict>

<key>AAPL,slot-name</key>

<string>Internal@0,31,3</string>

<key>device_type</key>

<string>Audio device</string>

<key>hda-gfx</key>

<string>onboard-1</string>

<key>model</key>

<string>Cannon Lake PCH cAVS</string>

</dict>

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>

<dict>

<key>AAPL,ig-platform-id</key>

<data>BwCbPg==</data>

<key>AAPL,slot-name</key>

<string>Internal@0,2,0</string>

<key>device-id</key>

<data>kj4AAA==</data>

<key>device_type</key>

<string>VGA compatible controller</string>

<key>enable-hdmi20</key>

<data>AQAAAA==</data>

<key>framebuffer-patch-enable</key>

<data>AQAAAA==</data>

<key>framebuffer-stolenmem</key>

<data>AAAwAQ==</data>

<key>framebuffer-unifiedmem</key>

<data>AAAAgA==</data>

<key>hda-gfx</key>

<string>onboard-1</string>

<key>model</key>

<string>Intel UHD Graphics 630 (Desktop)</string>

</dict>

I'm using this patch now. And after finishing verbose screen it stucks on apple logo.

[MaLd0n]

9 hours ago, aarslan419 said:

I'm using this patch now. And after finishing verbose screen it stucks on apple logo.

try with old version VirtualSMC

[aarslan419]

I tried with version 1.1.0 and it worked. Booted up. Logged in. Now there is an interesting problem. If i click the top left apple menu/about this mac tab. A reboot kicks in. I tried system information app. It causes a reboot too. But i want to THANK YOU! for helping me to progress this far.

Edited April 24, 2020 by aarslan419

[MaLd0n]

32 minutes ago, aarslan419 said:

A reboot kicks in

last weg version?

[aarslan419]

It seems i have version 1.3.9 of whatevergreen but in github last version is 1.3.8

[MaLd0n]

i compiled it

[aarslan419]

Do I need to downgrade weg to solve the problem?

[MaLd0n]

try  

[aarslan419]

I tried 1.3.8 and no luck.