Asus N580GD (Help me for install High Sierra)

[Graissechel]

Luckily, I kept the High Sierra installation key. I boot on it with what you gave me and here's what's going on (SendMe archive) :

https://drive.google.com/open?id=1IgRai4cR3VdI6zptRYZytRGgzXb9TVg8

[onemanosx]

[ref]Graissechel[/ref], I think we are on to something here.

 

kernel: (VoodooI2C) VoodooI2CControllerDriver::pci8086,a369 I2C Transaction error details
kernel: (VoodooI2C) VoodooI2CControllerDriver::pci8086,a369 slave address not acknowledged (7bit mode)
kernel: (VoodooI2C) VoodooI2CControllerDriver::pci8086,a369 I2C Transaction error: 0x08800001 - aborting
kernel: (VoodooI2CHID) VoodooI2CHIDDevice::ELAN1300 Request for HID descriptor failed

 

If you can make a backup of you EFI to the USB. Then boot directly, with these files is much appreciated. Remember, block the DSDT if any.

Edited July 24, 2019 by Guest

[Graissechel]

I'm stuck at "End Randomseed" when I block DSDT, so I reactivate it.

Here the SendMe : https://drive.google.com/open?id=1Mq1gg-ic9FUrs7eArV5OYRq0ngtbHcKM

[onemanosx]

I'm stuck at "End Randomseed" when I block DSDT

Sorry about that.

Just place DSDT-01 and SSDT in patched folder and boot with config-02.plist

Edited July 24, 2019 by Guest

[Graissechel]

With this version I can boot. However, the touchpad is still not working and I have lost the Fn Keys and the ability to decrease or increase the brightness of the screen.

Here is the SendMe : https://drive.google.com/open?id=1nqDVYYl_CKAnTRamuKLUN41piqMNg-ei

They replied to my message on Gitter and told me :

"@Graissechel You shouldn't be patching ETPD._STA, revert to original"

Edited July 24, 2019 by Guest

[onemanosx]

With this version I can boot. However, the touchpad is still not working and I have lost the Fn Keys and the ability to decrease or increase the brightness of the screen

Dont worry about those for now since the SSDT is not patched for that yet. Our target is is I2C.

 

Archive4.zip

[Graissechel]

Still no functional touchpad. I don't know if you saw it, I edited the message above by putting what I was put on Gitter, hoping it would help you.

Here is the SendMe : https://drive.google.com/open?id=1g5DB6bpgeWcv4XeNYZ5TtAOkt4Iuw2E1

[onemanosx]

[ref]Graissechel[/ref], My patches for tonight do not include the Return (0x0F) for ETPD._STA

You can give the latest sendme or debug.sh for him and see his comment, too!

Edited July 24, 2019 by Guest

[onemanosx]

[ref]Graissechel[/ref], New Patch for SSCN Error.

 

Archive5.zip

 

Appologies, please reboot with this config.plist. Last config was botched. DSDT and SSDT remains.

 

config.plist.zip

Edited July 24, 2019 by Guest

[Graissechel]

Sorry, but it still doesn't work.

Here is the SendMe : https://drive.google.com/open?id=1YISAHYZnG-poV4qckfYP3TcXSXdfiC3C

EDIT : I just saw that you added the config.plist, I'll try again with it.

Edited July 24, 2019 by Guest

[onemanosx]

[ref]Graissechel[/ref], I guess I was to slow to update the last post.

Use this config.plist. DSDT and SSDT remains.

 

config.plist.zip

[Graissechel]

It doesn't change anything with the config.plist you gave me, touchpad still not working.

Here is the SendMe : https://drive.google.com/open?id=1pMVrQ8ePV6GfYnbh1Rdn_up0Tk1DbL_L

[onemanosx]

[ref]Graissechel[/ref], Trackpad can work in interrupt mode? I think its common in most Asus, has buggy GPI0 and thus can only work in polling mode. Anyway, happy to assist getting the track pad working

[Mac93]

Any News For Mojave Installation on this laptop? I have the same laptop, and at first I was able to install using clover, but now I'm with the formatted SSD, and I can't start the installation anymore. Sorry if I do OT on this discussion, but it's the same laptop.

Sorry for bad English

[onemanosx]

Any News For Mojave Installation on this laptop? I have the same laptop, and at first I was able to install using clover, but now I'm with the formatted SSD, and I can't start the installation anymore. Sorry if I do OT on this discussion, but it's the same laptop.

Sorry for bad English

This laptop should work fine with Mojave.

Use the guide here : https://Olarila.com/forum/viewtopic.php?f=50&t=8685

Your English is fine.

[Mac93]

This laptop should work fine with Mojave.

Use the guide here : https://Olarila.com/forum/viewtopic.php?f=50&t=8685

Your English is fine.

 

Do you also think about the video card ?? For now, I managed to install mojave via clover (pendrive replaced), but I'm downloading that Olarila ... I ask for advice for the video card that is a GTX1050, for this video card drivers you can use mojave or better highsierra?

[onemanosx]

[ref]Mac93[/ref], if there is no intel graphics then High Sierra

[pchitech]

[ref]Graissechel[/ref], In case you are curious previous attempts are to eliminate SSCN FMCN Acpi errors and were resolved successfully.

 

kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Got bus configuration values  

This next one is trying to implement polling mode with zero GPI0

DSDT-SBFB.aml.zip

 

Hi onemanosx,

I have the same notebook described in the first post.

After several attempts I was able to get the trackpad to work using this dsdt file you modified.

Now I can't get the function keys for the brightness and the backlight keys to work. Every time I try to patch the dsdt the trackpad stops working.

Can you help me please.

Sorrry for my English

[onemanosx]

[ref]pchitech[/ref], follow this guide for your brightness hotkeys

https://Olarila.com/forum/viewtopic.php?f=28&t=8396

[pchitech]

[ref]pchitech[/ref], follow this guide for your brightness hotkeys

https://Olarila.com/forum/viewtopic.php?f=28&t=8396

I tried to follow this guide and others but when I compile the dsdt I have a whole series of errors and if I try to solve them the trackpad stops working.

The trouble is that having started from a dsdt your, for the solution of the problem to the trackpad, surely something escapes me

[onemanosx]

[ref]pchitech[/ref], Boot your laptop without DSDT and run the app https://Olarila.com/files/Utils/RunMe.app.zip

Upload the sendme file created on desktop.

[pchitech]

[ref]pchitech[/ref], Boot your laptop without DSDT and run the app https://Olarila.com/files/Utils/RunMe.app.zip

Upload the sendme file created on desktop.

 

Sorry for the delay

Send me MacBook-Pro-di-Carlo.zip

[onemanosx]

[ref]pchitech[/ref], Read this guide and answer the 7 important hints highlighted in RED. https://Olarila.com/forum/viewtopic.php?f=46&t=8087

Reboot with this DSDT and extract new Sendme files. Upload files in I2C thread above and continue our discussion there

DSDT.aml.zip

 

As for your brightness hotkeys for ASUS laptops read here: https://github.com/hieplpvip/AsusSMC

[Vincenzo Romito]

Hi my installation (High sierra) works

but wifi , Nvidia, audio not work.

Help. Sorry for bad english

 

 

Edited June 15, 2021 by Vincenzo Romito

[MaLd0n]

check useful links

https://www.olarila.com/topic/6129-useful-links/