MacOs Catalina Hackintosh

[MaLd0n]

[ref]boytien6[/ref], just use kexts in clover/kexts/other

check Olarila folders for ur chipset

[boytien6]

[ref]boytien6[/ref], just use kexts in clover/kexts/other

check Olarila folders for ur chipset

I did put my kexts in Other folder. Do you mean FILES folder is Olarila folders in the USB installer? can you clarify on that?

[MaLd0n]

[ref]boytien6[/ref], https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[bibinalappatt]

after replacing colver folder getting this error on haswell hp laptop.

[MaLd0n]

[ref]bibinalappatt[/ref], use hackintool, don't exist magic in hackintosh, u need fine tune

[bibinalappatt]

[ref]bibinalappatt[/ref], use hackintool, don't exist magic in hackintosh, u need fine tune

what things need to done in hackintool sorry new to this

[Aloisio]

Ola Maldon, este modelo de usb 3.0 tem support pela configuração Clover? ou só via kext porque tentei e não consegui via kext generic.

Controlador ASMedia® USB 3.0:

[MaLd0n]

[ref]Aloisio[/ref], depende do modelo, se for o hardware da sua sig, só com kext mesmo e a kext causa bastante problema

vc pode usar a mXHCD.kext, se não funcionar injete o seu dev id na kext ou fake via dsdt

[Wizzard]

What can be wrong when I get kernel panic after booting to freshly installed system from SSD after initial install from USB?

No matter if I choose config or config2, the system always restarts before it loads the graphical installer.

Before I used Mojave with no problem.

Edited October 11, 2019 by Guest

[Aloisio]

[ref]Aloisio[/ref], depende do modelo, se for o hardware da sua sig, só com kext mesmo e a kext causa bastante problema

vc pode usar a mXHCD.kext, se não funcionar injete o seu dev id na kext ou fake via dsdt

Ok. consegui achar este Support NEC Renesas Chipset USB 3.0 Host Controller for old motherboard in Mac OS X, vou fazer o teste.

[Lulchev]

Hello friends! I need help to get the full potential of my Video/Photo editer machine again! I have created for High Sierra a DSDT patch from MaLd0n. Can I use them? I want to install fresh MacOS. Thank you people!

Here my config:

1. MB - GB Z370 AORUS GAMING 7

2. CPU - Intel® Core™ i7-8086K

3. SSD - M2 Samsung 970 PRO 1TB

4. Cooler - FD CELSIUS S36 WATER

5. Video - ASUS ROG STRIX GTX1080TI 11GB (but I will change it with Vega 64, and I need to know Can I put second Vega. Will it be helpful and can they work as one?)

6. RAM - 4x16G DDR4 3000 XPG D41 RGB ADATА

7. WiFi and Bluetooth - BCM943602CS (Can you recommend another Wifi because with that card I notice a big lag in the mouse and keyboard)

[MaLd0n]

[ref]Lulchev[/ref], system is installed? send me efi folder, i'll check

[septicshock]

I'm having setting up OpenCore 0.5.1 config. Maldon, you had kindly created a DSDT for me and I can't seem to get it to work with or without the DSDT. Any help appreciated.

GA z170m-d3h, f21 firmware

Intel 6700K

Radeon RX570

OCEFI.zip

[Zarach]

Já saiu a versão final do Catalina da Olarila sem ser as betas?

[MaLd0n]

[ref]Zarach[/ref], Sim

[douglasfunkler]

Any news on AMD RX 5700xt working under Catalina?

[mariusrg]

Hi, I need some help if possible.

I was able to install Catalina with no issue using the image provided here, but I'm unable to use my dsdt. Once I replace the one from the image, I cannot log, getting some weird errors messages. Also, noticed that some applications are suddenly crashing, like Spotify (cannot even open it), Chrome, not sure if it's something related with the image or the clover config.

I will attach also the send me output files, but if there are some other things I need to change in clover, please let me know.

Also, the boot process takes about double than the working clover/Sierra hack. (on a different partition)

Almost forgot to add, is there a way to make HWmonitor application to work, in order to be able to configure the fan speeds? (or if there are other alternatives)

Thank you so much.

Send me MariusiMac.zip

[MaLd0n]

[ref]mariusrg[/ref], use ur dsdt without ssdt Olarila

[ref]douglasfunkler[/ref], i think in next releases

[mariusrg]

Hi, I tried that of course, replacing the DSDT files, but with my file I cannot boot at all. (while on the working build/partition works perfectly)

[MaLd0n]

[ref]mariusrg[/ref], post one photo

[mariusrg]

Added, no idea how to add a jpeg photo.

20191011_162227.pdf

[MaLd0n]

[ref]mariusrg[/ref], try it

SSDT-EC-USBX.aml.zip

[mariusrg]

So use only this file, or together with my dsdt one?

[MaLd0n]

[ref]mariusrg[/ref], try together

[mariusrg]

Thank you, I was able to boot now with both files.

Still, I'm not sure what to do to fix the sensors problem, with the HWmonitor app, in order to adjust the fan rpms. If I add fakesmc in clover I cannot boot, it gets stuck.