[Guide] Native USB Fix for Desktops - No Injector/Kext Required - SkyLake+

[MaLd0n]

[ref]RandomTech7[/ref], remove SSDT-PNLF.aml, SSDT-UIAC.aml and SSDT-USBX.aml

Remove USBINJECTALL too

DSDT.aml.zip

 

check with hackintool, usb tab

[RandomTech7]

RandomTech7, remove SSDT-PNLF.aml, SSDT-UIAC.aml and SSDT-USBX.aml

Remove USBINJECTALL too

thank you for making it all-in-one DSDT solution

it still not showing under xhc14 in IOReg, its under psxs, not showing in Hackintool usb tab as well.

but its working with 5gb speed so its ok for me.

5 photos attached here to clarify even better.

https://imgur.com/a/O7xd3NX#wgY4nx6

[MaLd0n]

[ref]RandomTech7[/ref], looks good, usb-c in ur case work native, don't need nothing, we just remove unnecessary files

[RandomTech7]

looks good, usb-c in ur case work native, don't need nothing, we just remove unnecessary files

now I got it, thank you

[telepati]

My all USB's stopped working. I sent to my RX560 to service and I start to use HD630 added framebuffer for HDMI to devices/properties for Z390M Gaming. I can boot but my all USB's stopped working. I cleaned cache and NVRAM with MacOptimizer but when I boot no USB anymore.

What could have happened?

[MaLd0n]

[ref]telepati[/ref], no idea, work good o windows?

[telepati]

[ref]MaLd0n[/ref], Yes its working. Its also working on Clover Boot screen but when finished the boot and going to the desktop all USB stops. I also made CMOS reset and sets all BIOS again but it didn't help.

[MaLd0n]

[ref]telepati[/ref], try with usbinjectall+xhciinjector

[telepati]

[ref]MaLd0n[/ref], I already tried that USBInjectAll+UIAC SSDT that worked. But I wonder why native USB suddenly stopped working after removing RX560?

is native USB setup related with the GPU?

[MaLd0n]

[ref]telepati[/ref], no

[vinpo]

Hi, thanks for helping me on Native USB Fix

Vinpo iMac.zip

[MaLd0n]

[ref]vinpo[/ref], check if work, use it with usb limit port patch and u can use all usb ports

SSDT-4-xh_rvp08.aml.zip

[vinpo]

vinpo, check if work, use it with usb limit port patch and u can use all usb ports

Before i have to remove the options in BOOT section of Clover Configurator. Tkanks

Added in 6 minutes 2 seconds:

Before i have to remove the options in BOOT section of Clover Configurator. Tkanks

 

sorry for my lack of clarity, I wanted to say: before i have to remove the options "uia_exclude" in BOOT section of Clover Configurator.

and where to put the downloaded file SSDT-4-xh_rvp08.aml.zip

Tkanks

[MaLd0n]

[ref]vinpo[/ref], clover/acpi/patched and dont use usbinjectall or other kext fdor usb

[vinpo]

vinpo, clover/acpi/patched and dont use usbinjectall or other kext fdor usb

the new configuration does not seem to work with usb3. I also deleted the UIA_EXCLUDE lines in the BOOT section of clover

[MaLd0n]

[ref]vinpo[/ref], u need raise usb ports or map via oem ssdt

https://Olarila.com/forum/viewtopic.php?f=62&t=6539

[telepati]

[ref]MaLd0n[/ref], are we still need these USB settings while using native USB setup?

[MaLd0n]

[ref]telepati[/ref], u can use without any problem, Inject, Add ClockId and Fix Ownership

[vinpo]

vinpo, u need raise usb ports or map via oem ssdt

viewtopic.php?f=62&t=6539

Thank you MaLdOn, now is all ok

https://i.imgur.com/Q9leAxA.png' alt='IMGUR>'>

[telepati]

[ref]MaLd0n[/ref], my RX560 came to service. I connected it and add native USB SSDT-6 AMI. Now it's working. But when I removed RX560 its stop working. isn't that weird?

[MaLd0n]

[ref]telepati[/ref], lol, is strange, but if work just enjoy

[anastely]

Hey, when i enter an external hard"usb3" OR Mobile "android" it does not work just say "USB Accessory Needs Power"?

How can i solve this issue, please?

[MaLd0n]

[ref]anastely[/ref], u need remove usbinjectall and use a native way

[Ghoys]

hey maldon.. i dont have method If (((UMAP & One) == One)). Please just call me how to edit my ssdt. this is my ssdt msi h310 pro vh

[MaLd0n]

[ref]Ghoys[/ref], msi have a diff tables, use hackintool for create one usb injector, i don't have any msi for check