[Guide] Easy Audio Solution with AppleAlc

[MaLd0n]

10 hours ago, tsaipen said:

I've followed the tutorial, but it doesn't work

in some cases need extra things like irqs solution

[Indiana SxS]

My issue is i don't see the sound card. I am using a Haswell efi. 

Please see zip with screenshot

 

 

Screen Shot 2022-02-04 at 4.45.20 PM.zip

[MaLd0n]

check manufacturer page

[Indiana SxS]

It doesn't show on manufacturer's page. I have an HP Envy 15t-k000 On the manufacture page it shows realtek driver for windows to download but doesn't say anywhere what my card is my serial of the laptop is 5CD434879Q

What should i do from here?

 

 

 

1 hour ago, MaLd0n said:

check manufacturer page

I put LInux Mint on a USB and booted it up and did a lspci -v and here is what it says and audio is working in this linux.

 

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
    Flags: bus master, fast devsel, latency 0, IRQ 35
    Memory at b2610000 (64-bit, non-prefetchable)
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset High Definition Audio Controller
    Flags: bus master, fast devsel, latency 0, IRQ 36
    Memory at b2614000 (64-bit, non-prefetchable)
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

 

I tried another command on my linux usb and i think i got it. I used arecord -L and it returned

ALC3241 as shown below. So armed with ALC3241 and the screenshot i provided earlier what do i do?

 

mint@mint:~$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3241 Analog [ALC3241 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

 

Edited February 5, 2022 by Indiana SxS
cleanup paste

[Indiana SxS]

ok so i am new to this. So tell me if im doing something wrong. I am using the haswell efi from the downloads section. in kexts it has applealc and lilu. i am using opencore. 

i see the following here? 

Realtek

ALC290/ALC3241

layout 3, 4, 10, 15, 28

 

i go into opencore nvram i have tried to type in each layout above.

-v alcid=15 watchdog=0 igfxonln=1 -no_compat_check

i havent got audio. am i doing stuff wrong am i soppose t do something physically with files in kexts ?

 

What am i missing? am i missing a step?  Do i have to have AppleHda ? i didnt see that mentioned in this guide? if so how do i do that?

 

thanks for anyones help.

 

 

 

[laudou]

On 4/18/2019 at 2:38 PM, MaLd0n said:

[ref]Sampath007[/ref],

Thanks. Works ok with alcid=2

[ameen]

My hackintosh huawei matebook d15 i5-10210u everything is working fine

Except sound 

• Intel(R) Audio for displays device ids:
INTELAUDIO\FUNC_01&VEN_8086&DEV_280B&SUBSYS_80860101&REV_1000
INTELAUDIO\FUNC_01&VEN_8086&DEV_280B&SUBSYS_80860101

• Intel Smart Sound - audio controller:
PCI\VEN_8086&DEV_02C8&SUBSYS_1260152D&REV_00
PCI\VEN_8086&DEV_02C8&SUBSYS_1260152D
PCI\VEN_8086&DEV_02C8&CC_040100
PCI\VEN_8086&DEV_02C8&CC_0401

• ESAuDriver Device
ACPI\VEN_ESSX&DEV_8336&SUBSYS_152D1262
ACPI\ESSX8336
*ESSX8336

I think 8086 02c8 controller supported by applealce

but real sound is Essx8336 codec sound it is not supported by apple alc yet

It is i2c sound card

Do you know about this essx8336 guide anywhere?

 

[futureorkun]

I am attaching my system log. I tried many ways. But ALC274 layout ID:21.28.35.39 none of them output from the headphone. Do not offer VoodooHDA. Tried, doesn't work. I am attaching my site log and EFI.

In addition, while the xhciportlimit is ticked in USB patching, the USBs become reactive when the device is turned on. In this case I can't patch. What can I do as a solution for this?

EFI: https://easyupload.io/zmni3c

520-24ICB.zip

[MaLd0n]

https://github.com/acidanthera/AppleALC/wiki/Adding-codec-support

[Osk]

hello, I downgrade cpu from ryzen 3600 to athlon 200GE and now I have ramdom stuttering audio. already try all the alcid numbers for my codec 1220A....any thoughts. Thanks.

mobo asus b450-f, cpu athlon 200GE and gpu RX6600XT

 

https://www.mediafire.com/file/ju94wd7hulrgxdr/Send_me_192.168.1.3.zip/file

 

Edited October 29, 2022 by Osk

[salim mohammed]

Where do you even copy and paste the layout ids files, will you copy them to your efi resources folder or where 

[MaLd0n]

u need add number on alcid=xx bootarg or inject via device properties

[salim mohammed]

My Audio codec is ALC662 hash 4570 4th generation only audio is not working 

[Alexander Gutarev]

Hi,

Why the volume control does not work? Sound Card: scarlet solo.

Attach data and screenshot

Thanks.

Send me iMac-Pro.zip

screen.zip

config.plist.zip

Edited December 16, 2022 by Alexander Gutarev

[MaLd0n]

5 hours ago, Alexander Gutarev said:

Why the volume control does not work? Sound Card: scarlet solo.

this card don't use applealc, have a correct driver for that

[futureorkun]

13.09.2022 saat 10:54'te MaLd0n şunları söyledi:

https://github.com/acidanthera/AppleALC/wiki/Adding-codec-support

 

Man, this job is beyond impossible for me. Why don't you help?

Edited December 25, 2022 by futureorkun

[Deivison Souza]

..

Em 18/04/2019 às 15:01, MaLd0n disse:

1-Use AppleAlc.kext e Lilu.kext em Clover/kexts/other(preferencial) ou Biblioteca/Extensões

Baixar AppleAlc

https://tinyurl.com/y6vh5aqy

Baixar Lilu

https://tinyurl.com/ya657fxl

 

2-Você precisa verificar qual o seu codec de áudio

Você pode usar um Hackintool, Página do Fabricante ou Run_me.app para verificá-lo (ficar com o carregamento AppleAlc)

 

-Hackintool

Baixar Hackintool

https://tinyurl.com/yamzbgd6

-Página do fabricante

 

-Run_Me.app

Baixar Run_Me.app

https://tinyurl.com/y9562hz7

Vamos começar

1-Ir para a página do AppleAlc GitHub

https://tinyurl.com/yath7r42

 

2-Vá para "Clone ou download / Download ZIP"

 

3-Extraia o arquivo e vá para a pasta Recursos

4-Verifique quais layout-ids você pode usar para o seu codec de áudio (no meu caso é ALC892)

Tenho muitas opções

Solução 5-Trevo

Abra config.plist com um bom editor de plist, você pode usar um Clover.app, vá para Boot/Arguments e adicione alcid=xx (xx é layout-id para o seu codec de áudio)

Solução 6-OpenCore

Abra config.plist com um bom editor de plist, vá para NVRAM / Adicionar / boot-args e adicione alcid = xx (xx é layout-id para o seu codec de áudio)

 

-Créditos e agradecimentos às pessoas antigas e novas da comunidade que desenvolveram patches, kexts e bootloaders!

 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief e família, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh comunidade, Facebook Olarila comunidade e muitos, muitos, muitos outros!

 

Estamos todos aqui para nos divertir e aprender uns com os outros!

.como abre esse config.plist?

[Deivison Souza]

tenho o ALC256 ja fiz isso tudo e não resolveu 
config: 

enão vaio F14

i5 10210u comet lake
UHD 620
 

[MaLd0n]

DSDT IRQs Patch

[Deivison Souza]

On 1/10/2023 at 2:43 PM, MaLd0n said:

DSDT IRQs Patch

Daniel sou novo nessa área de hackintosh e estou criando ele para poder estudar programação.

vi que você esta me dando a solução mas não sei como fazer esse DSDT IRQs Patch.

meu notebook Vaio FE14
Intel i5 10210u cofe lake - commet lake

No Windows informava intel UHD gráficas, no entanto o áudio eu resolvi...
agora só falta usar o HDMI para usar COM meu monitor e quando a tela do notebook se apaga e entra no modo inativo a tela não LIGA mais tenho que forçar a reinicialização da maquina.

SEM SOLUÇÃO:
*HDMI

*MODO INATIVO DE TELA

[DahenECE]

Hello dears,

Please I have issue after installation of macOS Ventura on my Lenovo with the below specifications :

Machine Model: Z50-70 Laptop (Lenovo) - Type 80E7

Motherboard CPU full model: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz   2.60 GHz  

SSD/HDD and capacity: 2 hard drives SSD: will use for Mac 256Gb, HDD for Windows 1Tb.

Audi Codec: Conexant CX20751/2 HD Audio

Graphic: Intel HD4400 , and Opencore EFI.

-----------------------------------------------------------------------

What I Did?

1-I tried to use some guide for post installation for audio issue in this link & link using Lilu and AppleALC but it was not helpful even all layout ID I tried but still not worked.

2-I tried AppleHDA patcher using this guide but patcher app did not work on macOS Ventura. --> AppleHDA vanilla patched kext worked in High Sierra (10.13) using clover. 

3-I tried VoodooHDA kext , at first I disabled AppleALC in config.plist and install VoodooHDA but it does not worked, --> VoodooHDA kext worked in Mojave using clover.

Note:

1- I tried to use clover boot loader but unfortunately my laptop chips Haswell  not supported and could not find EFi folder so I used OpenCore EFI folder also Olarila image.

2-Audio codec can not be detected by any tools, and already my audio codec Conexant CX20751/2 HD Audio supported by AppleALC.

3-Run.me App output from this link: https://we.tl/t-4jSJ7NS1Bn , I could not attach since size was 10.1MB.

please really need to find a solution for this hackintosh to make audio work.

Thank you 

[c mulyana]

Awasome, my Asus X407UB OS Ventura have Audio now 😍, thank's for Tutorial

[AndreMaculan]

ASUS ZENBOOK UX433FA

VENTURA

ALC294

TRIED ALL LAYOUT, THE DRIVER IS RECOGNIZER BUT NO SOUND OUTPUT.

ONLY THE JACK MAKE SOUND NOISES.

 

HELP?

 

[EquixESP.ttv]

I have ALC892 with codec 4, the microphone is enabled and working but the sound does not work, it recognizes it but does not make any sound

I have ALC892 and use codec 4, the internal microphone works but not the internal speaker, it does not make any sound but its recognized

[Raxas]

Dear support,

in my case no audio device nothing to see with hackintosh tool,

Also i did it Apple Alc kext inside the kext folder on EFI folder