[Guide] Easy Audio Solution with AppleAlc / Clover and OpenCore

[MaLd0n 1,000,896]

u try last kexts version and alcid=5 or other supported layout for ur audio codec

[mozbius 1]

1 hour ago, MaLd0n said:

u try last kexts version and alcid=5 or other supported layout for ur audio codec

Thank you for your support  MaLd0n!

After some further investigation here's what works with my Mojave P6T Deluxe v2 (AD2000b) setup (I will retest with layout id 5 again just in case)...

KEXTS : Latest Lilu & AppleLC 

CLOVER CONFIGURATOR: ACPI: change HDAS to HDEF

CLOVER CONFIGURATOR: Devices: Layout 7, ResetHDA, 

upload image to internet

AND deleting HDAEnabler kext 

I also removed LegacyAppleYukon2 since it didn't turn on my Marvel Yukon network card on my motherboard (IONetworkingFamily did )

By the way my Rosewill RDCR-11004 - Data Hub is working too (when something is connected in it during boot sequence) which is awesome.

Quick question : Can P6T motherboard install Catalina?

 

Muito obrigado.

 

IONetworkingFamily.kext.zip SATA-RAID.zip

Edited August 25 by mozbius

[MaLd0n 1,000,896]

7 hours ago, mozbius said:

Thank you for your support  MaLd0n!

hdas to hdef is skylake+, u dont need it

u can try catalina. i never use lga775 or 1366 in cata

[Paolo7297 0]

Hello, I have an icelake laptop with alc256 codec... I tried all of the layout id, but none of them worked...I was able to see outputs, i can't hear sounds... I tried to make a custom one (i don't know if it was correct) but i see the outputs, but i can't hear sound... Tried with codeccommander or without, nothing changed...
Can you help me?

[MaLd0n 1,000,896]

2 hours ago, Paolo7297 said:

Hello,

check my folder here

https://www.olarila.com/topic/9918-olarila-hackbook-lenovo-ideapad-s145-10th-gen-catalina-big-sur-full-dsdt-patches-clover-and-opencore/

[Paolo7297 0]

2 hours ago, MaLd0n said:

check my folder here

https://www.olarila.com/topic/9918-olarila-hackbook-lenovo-ideapad-s145-10th-gen-catalina-big-sur-full-dsdt-patches-clover-and-opencore/

Hi, i checked the folder, i noticed that the only differences are the FakePCIID, but if i try them, they won't get loaded and i get no sound...

[MaLd0n 1,000,896]

3 hours ago, Paolo7297 said:

Hi, i checked the folder, i noticed that the only differences are the FakePCIID, but if i try them, they won't get loaded and i get no sound...

u need dev id into hdas/hdef device

Quote

"device-id", Buffer () {0x70, 0xA1, 0x00, 0x00}

 

[Paolo7297 0]

2 hours ago, MaLd0n said:

u need dev id into hdas/hdef device

 

Thanks a lot! It resolved my problems!

[MaLd0n 1,000,896]

Enjoy!

[IGosa Bagus Yuniarta 0]

On 4/18/2019 at 3:01 PM, MaLd0n said:

-Donations with PayPal
https://tinyurl.com/r2bvzm7

I have a problem in the undetected audio I have tried with Hackintoshtool and Read me.app but it is not detected. I tried running DCPImanager on the audio device 0x80861E20 and Sub Device 0x10280591, but the Code Name column did not appear. I've copied and pasted AppleALC.kext and Lilu.Kext in EFI / Clover / Kext / Other

Help me

This is the result I run Read me.app

DSDT.aml

[MaLd0n 1,000,896]

20 hours ago, IGosa Bagus Yuniarta said:

I have a problem

check manufacturer site

[Giancarlo Laredo Agüero 0]

Hi, my sound card is not showing up in Hackintool. I'm using Olarila Catalina + Ryzen 7 + RX570 + B450M chipset + ALC892

 

 

Hackintool_v3_4_4_y__Guide__Easy_Audio_Solution_with_AppleAlc___Clover_and_OpenCore_-_Guides_and_Tutorials_-_Olarila_y_AnyDesk.jpg.zip

[MaLd0n 1,000,896]

1 hour ago, Giancarlo Laredo Agüero said:

Hi, my sound card is not showing up in Hackintool. I'm using Olarila Catalina + Ryzen 7 + RX570 + B450M chipset + ALC892

applealc+lilu?

[dawilliams660 0]

tried this and still no audio

[MaLd0n 1,000,896]

2 hours ago, dawilliams660 said:

tried this and still no audio

check if ur audio codec have support

[dawilliams660 0]

I found the drivers for it on the windows side, is there any way I can find out what codec it is form that?

[MaLd0n 1,000,896]

8 hours ago, dawilliams660 said:

I found the drivers for it on the windows side, is there any way I can find out what codec it is form that?

u need check applealc project

[dawilliams660 0]

ok....where can I find this?.....I would love to get this laptop to work......this and the WiFi not working...everything else is working

[MaLd0n 1,000,896]

17 minutes ago, dawilliams660 said:

ok....where can I find this?.....I would love to get this laptop to work......this and the WiFi not working...everything else is working

https://www.olarila.com/topic/6074-guide-easy-audio-solution-with-applealc-clover-and-opencore/

[dawilliams660 0]

Thank you....still no audio...did all the layout ID's

Edited October 12 by dawilliams660

[AmazingHarsh 1]

I will performed every single step , but still no HDMI audio 

[MaLd0n 1,000,896]

check docs in acidanthera for hdmi audio

[ZeyadElassal 0]

I don't know how to inject audio layout to config.plist, when I changed the argument key in boot dictionary, no sounds work also the VGA malfunction, I don't know what to do my laptop is Lenovo z5070, and there is no information about audio codec in Hackintool, but I used the hexa code, and I find that it is ALC282.

[MaLd0n 1,000,896]

clover in boot tab, arguments

opencore in nvram tab

alcid=1 for example

[ZeyadElassal 0]

10 hours ago, MaLd0n said:

clover in boot tab, arguments

opencore in nvram tab

alcid=1 for example

it causes the vga to disfunction, this is the DPCIManager sees the audio card, and the Hackintool doesn't provide any info
images