Install MacOS with Vanilla Olarila Image, Step by Step

[hakimilamina]

just follow first post

This post ? https://Olarila.com/forum/viewtopic.php?f=50&t=8685 I want to install High Sierra !

[MaLd0n]

[ref]hakimilamina[/ref], yes, work for all systems with Olarila images

[hakimilamina]

Hello everyone !

I'm very good at booting via usb, but I block here when I run.

I have a Gigabyte z370p d3. Would someone show me correctly how to configure the BIOS for this motherboard?

Note that I do not have a graphics card.

I used the .raw High Sierra

Thank you in advance !

20190830_104525.rar

[Tazorro]

I managed to install Mojave as a guide and I have "everything" working, audio, ethernet, etc. The problem is this, part the verbose ends and then black screen. I have to wait for it to go into standby, disconnect and reconnect HDMI cable

here it appears and everything works magically. If the same thing I do before I go into standbay always black screen.

What's wrong'? Thank you so much.

I attach config (modified graphics with loadVbios, inject Ati eRadeonDelnit) and screen desktop.

file.zip

[MaLd0n]

[ref]hakimilamina[/ref], try it

EFI.zip

 

Added in 58 seconds:

[ref]Tazorro[/ref], enable csm in bios/uefi setup

[hakimilamina]

hakimilamina, try it

thx ! always a problem somewhere

20190830_174003.rar

[MaLd0n]

[ref]hakimilamina[/ref], extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here!

[hakimilamina]

hakimilamina, extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here!

 

here are the files !

origin.rar

[Tazorro]

Tazorro, enable csm in bios/uefi setup

mine is a legacy bios

Little update, I installed a rx 570 4gb and I didn't find this problem. Everything starts normally. Tips? I forgot the motherboard is an Asus P6X58D-E with a I7 930 CPU.

[MaLd0n]

[ref]hakimilamina[/ref], DSDT.aml.zip

[hakimilamina]

DSDT.aml.zip

Thank you for this file, but I do not know what to do with this file! Can you guide me please? Sorry, I'm a real novice with regard to Mac and especially hackintosh. Thank you in advance !

[MaLd0n]

[ref]hakimilamina[/ref], dsdt.aml into clover/acpi/patched

[hakimilamina]

hakimilamina, dsdt.aml into clover/acpi/patched

yessss !!! Thank you so much ! I finished the interview. I also finished the steps: disablehibernate.command and master-disable.command

I am currently on the part "7- Install Clover Bootloader in SSD".

- Do I do this manipulation while still being booted from the hackintosh partition?

- So I have to put the folder Clover_v2.5k_r5058 in another usb key?

- After I run just Clover_v2.5k_r5058?

Sorry for all these questions, I'm afraid to make mistakes and have to redo everything!

Thank you in advance !

20190830_232655.rar

[MaLd0n]

[ref]hakimilamina[/ref], if u use Olarila clover folder for ur chipset, just put efi folder inside efi partition, don't need install clover

[hakimilamina]

hakimilamina, if u use Olarila clover folder for ur chipset, just put efi folder inside efi partition, don't need install clover

 

EFI partition on the USB drive on which I currently boot? After placing the EFI folder in the EFI partition, I always restart on the boot key or on the hackintosh partition. Note that I have win 10 install on another hard disc.

What should I do now please?

How to access the efi partition on the hard drive of the high sierra installation?

[hakimilamina]

hakimilamina, if u use Olarila clover folder for ur chipset, just put efi folder inside efi partition, don't need install clover

Can I use this method? https://Olarila.com/forum/viewtopic.php?f=79&t=7056

So for my case, all I need to do is copy the EFI from the folder CLOVER.SERIES.100.200.300 into the EFI of the installation partition?

After that, can I boot live through the partition? Or should I always use the usb key? Until which stage?

I have a Realtek 8188Gu wireless LAN.11n USB NIC. Do you have a solution to make it work on hackintosh?

ITS GOOD ! EVERYTHING IS OK ! WHAT SHOULD I DO TO FIND AND INSTALL DRIVERS FOR MY KEY Realtek 8188Gu wireless LAN.11n USB NIC FOR EXAMPLE?

Edited August 31, 2019 by Guest

[Tazorro]

Hi Madlon, I'm trying and trying again to change the configuration parameters but nothing to do. I am stuck in this situation, to access I have to wait for the PC to go into standby. I hope you can help me. Thank you

[MaLd0n]

[ref]hakimilamina[/ref], u need use efi into ur hdd/ssd for boot from hdd/sdd, fforget usb stick

Added in 38 seconds:

[ref]Tazorro[/ref], if u have other gpu, try it

[hakimilamina]

hakimilamina, u need use efi into ur hdd/ssd for boot from hdd/sdd, fforget usb stick

Thx !!! That's what I did;) Thank you very much! Everything is ok except that there is a problem with the display that jerks when I browse the internet or if I watch youtube videos or videos on VLC. What should I do? I have a Realtek 8188Gu wireless LAN.11n USB NIC. Do you have a solution to make it work on hackintosh?

[MaLd0n]

[ref]hakimilamina[/ref], check if realtek provide driver

[ananda27530]

Laptop Model: HP DV6 6121 Tx

Processor: Core i7 2630QM 2nd gen (Sandy Bridge)

Ram: 8GB

Graphics: Intel HD 3000 + 2GB Radeon 6770M

Chipset: H67M Express

HDD: 640gb Sata

Boot mode: Legacy

Thanks in advance...

Please suggest supported os..... already tried Olarila Mohave image..but stuck on broken screen on boot.

[MaLd0n]

[ref]ananda27530[/ref], ur hardware is old, loose support in mojave+

check dosdude app for create one perrsonal usb stick

[ananda27530]

Please help me about steps...I am new on hackintosh...

[MaLd0n]

[ref]ananda27530[/ref], check dosdude site or use high sierra

[ACP91]

HOLA,

no puedo instalar macOS Sierra, se queda parado.

Mi Pc es:

AsusRock LGA 775

Intel Core Duo 3,00Ghz

Gigabite Nvidia GT 730 2GB

Que puedo hacer? Adjunto imágenes.

Un saludo y gracias.