orbee Posted October 4, 2021 Share Posted October 4, 2021 that's it, thanks- I had some problem with the ioreg dump, it failed 3 times https://drive.google.com/file/d/1CysvxRc8j8di7jQVG1VH2wx8TrEf2amU/view?usp=sharing 11 hours ago, MaLd0n said: post one full dump use google drive or other service Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 4, 2021 Administrators Share Posted October 4, 2021 1 hour ago, orbee said: that's it, thanks- I had some problem with the ioreg dump, it failed 3 times first remove these acpi renames, reboot and extract new sendme Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
orbee Posted October 4, 2021 Share Posted October 4, 2021 6 minutes ago, MaLd0n said: first remove these acpi renames, reboot and extract new sendme https://drive.google.com/file/d/1jqlj515gPhULa9gNxb0ShwPpOCfsRj0x/view?usp=sharing thanks Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 5, 2021 Administrators Share Posted October 5, 2021 renames stay there Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
orbee Posted October 5, 2021 Share Posted October 5, 2021 im sorry let's try again i guess https://drive.google.com/file/d/1S3wLlLSg2o0UXd_oPKmKSdRbtp8EsEQe/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 6, 2021 Administrators Share Posted October 6, 2021 DSDT.aml Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
orbee Posted October 6, 2021 Share Posted October 6, 2021 40 minutes ago, MaLd0n said: DSDT.aml 267.22 kB · 2 downloads https://ibb.co/K2yvsZ0 hackintosh goes in panic with this dsdt, any idea? i'm pretty new about this so, it's not totally clear what we are doing Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 7, 2021 Administrators Share Posted October 7, 2021 u need select rebase regions Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
orbee Posted October 12, 2021 Share Posted October 12, 2021 On 10/7/2021 at 1:47 PM, MaLd0n said: u need select rebase regions still kernel panic, no way to boot the system Quote Link to comment Share on other sites More sharing options...
member052018 Posted October 14, 2021 Share Posted October 14, 2021 (edited) Hello everyone.I ask for help starting Trackpad.I tried to do different SSDT-GPIOs, but nothing works. My device is (I think so Device (TPD0)Scope (_SB.PCI0.I2C0) ??? (But I'm not sure, because device TPD0 is in (_SB.PCI0.I2C1, _SB.PCI0.I2C2, _SB.PCI0.I2C3) IOREG <28 00 00 00 03 00 00 00> last try SSDT-GPIO-V5.aml. Does not work. I just can't start. I ask for help. DSDT_DSL.zip EFI 2.zip Edited October 14, 2021 by member052018 Quote Link to comment Share on other sites More sharing options...
Christopher G Posted October 31, 2021 Share Posted October 31, 2021 I have an Acer SF314-56G with SYN1B7F touchpad. I cannot seem to use GPIO interrupt mode, only polling works. I tried GPIO pinning, but the pin is already the same with the default in IOreg. I am currently using VoodooI2C + VoodooI2CHID Above is my troubleshooting archive. https://drive.google.com/drive/folders/1ZUNfGpeGB3ydURmqKAXO8mCDtp-qAlJo?usp=sharing Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 31, 2021 Administrators Share Posted October 31, 2021 2 hours ago, Christopher G said: I have an Acer SF314-56G with SYN1B7F touchpad if work nice in polling jus enjoy many devices don't work in interrupt mode Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Christopher G Posted October 31, 2021 Share Posted October 31, 2021 (edited) Polling works, but then the cpu usage jumps and lags the touchpad. This post has the same hardware as mine Can you share the result with me? Edited October 31, 2021 by Christopher G Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted October 31, 2021 Administrators Share Posted October 31, 2021 u have many acpi renames. not a clean efi folder Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Christopher G Posted October 31, 2021 Share Posted October 31, 2021 The clean DSDT is in the "chrisg661-swift3.zip" archive, with the name Pure DSDT. That DSDT is untouched. The one from Run Me is renamed because it is dumped from Mac OS. Quote Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted November 1, 2021 Administrators Share Posted November 1, 2021 opencore is not smart like clover. i need one full dump with runme.app with no renames and rebase regions select Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
Christopher G Posted November 1, 2021 Share Posted November 1, 2021 (edited) Got it. Here https://drive.google.com/drive/folders/1ZUNfGpeGB3ydURmqKAXO8mCDtp-qAlJo?usp=sharing in the acpidump.zip file I have dumped the DSDT and factory SSDTs from Windows using acpidump. I can't use runme because without ACPI patch I won't be able to boot to macos. Edited November 1, 2021 by Christopher G Quote Link to comment Share on other sites More sharing options...
tasco11 Posted November 23, 2021 Share Posted November 23, 2021 On 10/14/2021 at 9:46 PM, member052018 said: Hello everyone.I ask for help starting Trackpad.I tried to do different SSDT-GPIOs, but nothing works. My device is (I think so Device (TPD0)Scope (_SB.PCI0.I2C0) ??? (But I'm not sure, because device TPD0 is in (_SB.PCI0.I2C1, _SB.PCI0.I2C2, _SB.PCI0.I2C3) IOREG <28 00 00 00 03 00 00 00> last try SSDT-GPIO-V5.aml. Does not work. I just can't start. I ask for help. DSDT_DSL.zip 215.29 kB · 0 downloads EFI 2.zip 23.37 kB · 0 downloads From DSDT.dsl above, i didn't see any TP device attached to I2C Bus. Re-check what is your TP device via Win Quote Link to comment Share on other sites More sharing options...
member052018 Posted December 3, 2021 Share Posted December 3, 2021 On 11/23/2021 at 1:02 PM, tasco11 said: From DSDT.dsl above, i didn't see any TP device attached to I2C Bus. Re-check what is your TP device via Win I think the TDP0. I did it according to the instructions, but I can't see the device name in Win. Report_new.htm.zip Quote Link to comment Share on other sites More sharing options...
Steve Moretz Posted December 7, 2021 Share Posted December 7, 2021 I'm following this as I'm using open-core : https://dortania.github.io/Getting-Started-With-ACPI/Laptops/trackpad-methods/manual.html#create-osys-variable-under-i2c-scope The first part helped me to enable GPI0 and now I can see it in, "IORegistryExplorer" , Here's the file I used: SSDT-GPI0.dsl // Source: https://github.com/daliansky/OC-little DefinitionBlock("", "SSDT", 2, "DRTNIA", "GPI0", 0) { External(\GPEN, FieldUnitObj) If (_OSI("Darwin")) { \GPEN = One } } I understood that putting One would make it go well. I then used SSDT-XOSI.aml from: https://github.com/dortania/Getting-Started-With-ACPI/blob/master/extra-files/compiled/SSDT-XOSI.aml also this XOSI Rename (Add this under ACPI -> Patch in your config.plist): Comment String Change _OSI to XOSI Enabled Boolean YES Count Number 0 Limit Number 0 Find Data 5f4f5349 Replace Data 584f5349 Then added voodooi2c and voodooi2celan kexts from : https://github.com/VoodooI2C/VoodooI2C/releases/tag/2.6.5 and now I get these in the EFI/opencore-2021-12-07-065738.txt : 03:504 02:553 OC: Prelinked injection VoodooI2C.kext () - Invalid Parameter 03:532 00:028 OC: Prelinked injection VoodooI2CELAN.kext () - Invalid Parameter Any idea what to do now? I added these two from the same order, in the end, so no dependency problem should happen as far as I know. Report file is 3mb can't upload as the limit is 2.93MB here, so put it on google drive: https://drive.google.com/file/d/1R1G4zYBi263VrUFea518r2kdu4oEkqkb/view?usp=sharing Also VoodooPS2Trackpad is disabled in the config.plist Please also check the attachment, a bunch of useful pictures are there. Archive.zip Quote Link to comment Share on other sites More sharing options...
Steve Moretz Posted December 7, 2021 Share Posted December 7, 2021 2 hours ago, Steve Moretz said: I'm following this as I'm using open-core : https://dortania.github.io/Getting-Started-With-ACPI/Laptops/trackpad-methods/manual.html#create-osys-variable-under-i2c-scope The first part helped me to enable GPI0 and now I can see it in, "IORegistryExplorer" , Here's the file I used: SSDT-GPI0.dsl // Source: https://github.com/daliansky/OC-little DefinitionBlock("", "SSDT", 2, "DRTNIA", "GPI0", 0) { External(\GPEN, FieldUnitObj) If (_OSI("Darwin")) { \GPEN = One } } I understood that putting One would make it go well. I then used SSDT-XOSI.aml from: https://github.com/dortania/Getting-Started-With-ACPI/blob/master/extra-files/compiled/SSDT-XOSI.aml also this XOSI Rename (Add this under ACPI -> Patch in your config.plist): Comment String Change _OSI to XOSI Enabled Boolean YES Count Number 0 Limit Number 0 Find Data 5f4f5349 Replace Data 584f5349 Then added voodooi2c and voodooi2celan kexts from : https://github.com/VoodooI2C/VoodooI2C/releases/tag/2.6.5 and now I get these in the EFI/opencore-2021-12-07-065738.txt : 03:504 02:553 OC: Prelinked injection VoodooI2C.kext () - Invalid Parameter 03:532 00:028 OC: Prelinked injection VoodooI2CELAN.kext () - Invalid Parameter Any idea what to do now? I added these two from the same order, in the end, so no dependency problem should happen as far as I know. Report file is 3mb can't upload as the limit is 2.93MB here, so put it on google drive: https://drive.google.com/file/d/1R1G4zYBi263VrUFea518r2kdu4oEkqkb/view?usp=sharing Also VoodooPS2Trackpad is disabled in the config.plist Please also check the attachment, a bunch of useful pictures are there. Archive.zip 529.1 kB · 0 downloads Fixed it by adding a few more things to my config.plist kexts I had some dependencies inside The VoodooI2C Kext. Now GENI2C shows polling mode instead of interrupt mode. Quote Link to comment Share on other sites More sharing options...
oNuR Posted April 9, 2022 Share Posted April 9, 2022 On 12/7/2021 at 11:28 AM, Steve Moretz said: Fixed it by adding a few more things to my config.plist kexts I had some dependencies inside The VoodooI2C Kext. Now GENI2C shows polling mode instead of interrupt mode. How? Can you give more detail please. I have Mojave running great but touchpad not. Quote Link to comment Share on other sites More sharing options...
oldman20 Posted September 8, 2022 Share Posted September 8, 2022 (edited) after tried many times, still not working I followed voodooi2c guide carefully: correct my ACPI ID is TPD1, and know my CPU is Broadwell no need GPI0 controller patch, and I2C Controller Patches? Windows Emulation patch will done with SSDT-XOSI.aml Look at IOInterruptSpecifiers to know the hexadecimal APIC pin number is 0x1e mean 30 in decimal, less than 47, then can proceed to install kexts. But at Step Ensure I2C Serial bus name is correctly labelled, I not sure about it. Here is original method from DSDT: _SB.PCI0.I2C1.TPD1: Device (TPD1) { Name (_ADR, One) // _ADR: Address Method (_HID, 0, NotSerialized) // _HID: Hardware ID { If (LEqual (RDGI (0x35), One)) { Return (0xB0068C11) } Else { Return (0xAF068C11) } } Name (_CID, "PNP0C50") // _CID: Compatible ID Name (_UID, One) // _UID: Unique ID Name (_S0W, 0x04) // _S0W: S0 Device Wake State Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */)) { If (LEqual (Arg2, Zero)) { If (LEqual (Arg1, One)) { Return (Buffer (One) { 0x03 }) } Else { Return (Buffer (One) { 0x00 }) } } If (LEqual (Arg2, One)) { Return (0x20) } } Else { Return (Buffer (One) { 0x00 }) } Return (Zero) } Method (_STA, 0, NotSerialized) // _STA: Status { If (LEqual (And (SDS1, 0x08), 0x08)) { Return (0x0F) } Else { Return (Zero) } } Method (_CRS, 0, Serialized) // _CRS: Current Resource Settings { Name (SBFI, ResourceTemplate () { I2cSerialBusV2 (0x002C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C1", 0x00, ResourceConsumer, , Exclusive, ) Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, _Y2A) { 0x0000001E, } }) If (LEqual (GR13, One)) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL3) // _INT: Interrupts Store (0x1B, VAL3) } If (LOr (LOr (LEqual (BID, 0x80), LEqual (BID, 0x82)), LEqual (BID, 0x83))) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL4) // _INT: Interrupts Store (0x1A, VAL4) } Return (SBFI) } } I renamed SBFI to SBFB and remove: Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, _Y2A) { 0x0000001E, } But can't compile, so I removed these too: }) If (LEqual (GR13, One)) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL3) // _INT: Interrupts Store (0x1B, VAL3) } If (LOr (LOr (LEqual (BID, 0x80), LEqual (BID, 0x82)), LEqual (BID, 0x83))) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL4) // _INT: Interrupts Store (0x1A, VAL4) } Then compiled SSDT-TPD1.aml success (below attached files), put this SSDT-TPD1.aml in OC/ACPI and add to config.plist. Reboot and nothing change Trackpad work like mouse, but Trackpad setting not show in system preferences, and nothing advance setting for trackpad in BIOS. Battery status + brighter slide working well In IOReg, TPD1 show Interrupt mode is APIC, and can't see GPI0 - which I understand no need for Broadwell CPU right? What were I missing? thank and regards! With-SSDT-TPD1.ioreg Without-SSDT-TPD1.ioreg SSDT-TPD1.aml.zip Edited September 8, 2022 by oldman20 Quote Dell Inspiron 3558 (UEFI) - Intel Core i5 (5th Gen) 5200U /2.20GHz - 8GB RAM DDR3L - Intel(R) HD Graphics 5500/ nVIDIA GeForce 920M - 1366x768 - Realtek ALC255/ALC3234 @ Intel Wildcat Point-LP PCH - High Definition Audio Controller [F0]/ layout-id=20 - Intel(R) Dual Band Wireless-AC 3160 - Dell Touchpad /Synaptics I2C- Samsung SSD 860 EVO MZ-76E250BW 250GB (GPT) Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted September 8, 2022 Administrators Share Posted September 8, 2022 42 minutes ago, oldman20 said: after tried many times, still not working use default olarila efi folder for ur hardware and post one sendme Quote -Donations- PayPal HERE - Stripe HERE - Ko-Fi HERE - BuyMeaCoffee HERE - Mercado Livre HERE Skrill danielnmaldonado@gmail.com - BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 - BNB 0x10D1d656eCa00bD521f9b4A43B83098B8142e115 - USDT BSC BEP20 0xb57cfdfa371fad1981910f0e8332409ab99f74d9 - USDT TRC20 TUR6Z9AVS4AYzqPnULoHrfFvppRbhXmNbZ - KASPA kaspa:qpxzufgfj8p6r0krg58yzvs0009h2mwqgvcawa0xc2pth7sgzpv56j4f6dtvk - PicPay @danielnmaldonado - PiX @danielnmaldonado@gmail.com Premium Users HERE - Problems with Paypal HERE Sign up for a Bybit account and claim exclusive rewards HERE New ways to earn money with Linkvertise HERE Link to comment Share on other sites More sharing options...
oldman20 Posted September 8, 2022 Share Posted September 8, 2022 (edited) 1 hour ago, MaLd0n said: use default olarila efi folder for ur hardware and post one sendme thank @MaLd0n, just "use default olarila efi folder" without modify anything for my CPU? Here it is: https://drive.google.com/file/d/1jjaYiC5Bp40w_jLu58qkRz96s3diQVgr/view?usp=sharing RunMe-Output.txt.zip Edited September 8, 2022 by oldman20 Quote Dell Inspiron 3558 (UEFI) - Intel Core i5 (5th Gen) 5200U /2.20GHz - 8GB RAM DDR3L - Intel(R) HD Graphics 5500/ nVIDIA GeForce 920M - 1366x768 - Realtek ALC255/ALC3234 @ Intel Wildcat Point-LP PCH - High Definition Audio Controller [F0]/ layout-id=20 - Intel(R) Dual Band Wireless-AC 3160 - Dell Touchpad /Synaptics I2C- Samsung SSD 860 EVO MZ-76E250BW 250GB (GPT) Link to comment Share on other sites More sharing options...