Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

[Rafis Bikbov]

On 3/16/2020 at 11:47 PM, riyanardian said:

is my kext correct? the trackpad working like mouse only, there is no option for gesture

https://imgur.com/hj1LAo9

Try to remove "VoodooPS2Mouse.kext" and "VoodooPS2Trackpad.kext" from "VoodooPS2Controller.kext/Contents/PlugIns"

[riyanardian]

18 hours ago, Rafis Bikbov said:

Try to remove "VoodooPS2Mouse.kext" and "VoodooPS2Trackpad.kext" from "VoodooPS2Controller.kext/Contents/PlugIns"

still not working 😅

[MaLd0n]

21 hours ago, riyanardian said:

still not working 😅

check here

https://github.com/williambj1/GenI2C

[riyanardian]

On 3/20/2020 at 8:08 PM, MaLd0n said:

check here

https://github.com/williambj1/GenI2C

hi @MaLd0n whats next step to fix this problem ? after open program from Genl2C ?

• Generate Skylake I2C Controller Patch (In development🚧)

[elechocruz]

Can someone help me pls? my problem is that my trackpad doesn't work To make it work, I need to deleted my kext from the Kexts / Other folder, and put them back there, rebuild the kextcache with sudo kextcache -system-prelinked-kernel reboot and it worked, then I rebooted and it no longer worked . its like random if it will work or not.
WORKING: 
http://s000.tinyupload.com/index.php?file_id=20261312987899219841

NOT WORKING:
http://s000.tinyupload.com/index.php?file_id=40792482548307332919

I could not find any difference when it works and when not more than in the IOReg, below my TPDX device more things appear when it works, but in the bootlog and the kernel log I did not find anything different. Please someone help me

[MaLd0n]

31 minutes ago, elechocruz said:

Can someone help me pls?

DSDT.aml.zip

update kexts and bootloader

[Rezarg]

Hello 

I'm followed this guide step by step but no working for me 

I edit My DSDT and apply GPI0 controller patch but IOReg doesn't show ACPI ID

My windows ACPI ID:: TPDE

My ELAN based on ACPI: ELAN0501, ELAN0511

please help me 

 

 

Edited April 14, 2020 by Rezarg

[MaLd0n]

7 hours ago, Rezarg said:

Hello

first u need a folder with correct settings, check here

https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/

for start with a good config

[Rezarg]

On 4/13/2020 at 2:55 AM, MaLd0n said:

first u need a folder with correct settings, check here

https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/

for start with a good config

now I using olarila config but Nothing has changed and My trackpad Does not work and Thermal subsystem no longer installed 

only I'm removed some DSDT Rename like GFX To IGPU based on FAQ whatevergreen and AppleALC

 

Edited April 14, 2020 by Rezarg

[MaLd0n]

10 hours ago, Rezarg said:

now

first use a macbookpro13,1 smbios

[Rezarg]

18 hours ago, MaLd0n said:

first use a macbookpro13,1 smbios

smbios changed to macbookpro13,1 
Now trackpad works 👍 but unstable and No multitouch 
plus, IOReg still doesn't show ACPI ID

 

Edited April 14, 2020 by Rezarg

[MaLd0n]

2 hours ago, Rezarg said:

smbios changed to macbookpro13,1

DSDT.aml.zip

USE VoodooI2C.kext and VoodooI2CHID.kext

[Rezarg]

5 hours ago, MaLd0n said:

DSDT.aml.zip 28.64 kB · 1 download

USE VoodooI2C.kext and VoodooI2CHID.kext

Hello MaLd0n

problem solved 

trackpad is full functional and now IOReg shows my ACPI ID 🤘

thank you so much for your support and patching my DSDT

[MaLd0n]

4 minutes ago, Rezarg said:

problem solved 

enjoy

[bernardo415]

Good to all, MaLd0n has optimized my DSDT but at the moment of restarting or turning off the laptop the trackpad stops working, 
I thank Mald0n so much for their help but now I am in this problem.

I thank everyone for their help

https://drive.google.com/open?id=1ZHoKJgP2wb1UGcIVimKs4LSMvVeag_oj

Edited April 19, 2020 by bernardo415

[brunosmagri]

On 1/22/2020 at 4:54 PM, strangeralot said:

Hello everyone.

 

I put Mojave 10.14.6 in a Dell Inspiron 15 3000, i15-3583-D3X. Everything is ok, except the multi gesture of trackpad. I dont have scroll and two fingers touch (right button) in touchpad. Someone know what I should have do to enable at least the scroll?

 

Mald0n help me in another topic and instructed me to update my kexts, I used kext updater and just the VirtualSMC and WhateverGreen I can't update because the last versions of this kexts bugs the boot.

 

Mald0n even told me to exclude ps2mouse and ps2trackpad kexts, because my touchpad are I2C ( my APCI ID is TPD0). I did, without sucess.

 

I did this guide of this topic, whitout success too.

 

Here my Send me.

 

Please, someone can help me?

 

Thank you.

Hello, I have a laptop like that too, could you please send the links to download the OS and the software used? If it is possible to explain, I thank you very much!

I already did a hackintosh on my old Lenovo, but several things didn't work and I couldn't get all the kexts.

Thank you!

[Jesse henrique]

HOLY SHIT THIS WORKS

[Avenger-RP]

Hello,

I Have a Samsung X20 (NP350XAA-KFWBR) with ATMEL3000.

I could´t find the strings:

1. ACPI ID

2. APIC Pin Number

3. Ensure I2C Serial bus name are correctly labelled in DSDT.

Even looking in Windows. It seems to have different name entries.

Could anyone give me a hand?
Thanks.
 

I´m runing Mojave 10.14.6
Aida report: https://drive.google.com/open?id=1z5VVoD9iuDCv5EiLarMrWxgdkoi7223L
Send-me.zip:  https://drive.google.com/open?id=1oeDZ3urcJLIkI17ZSMRPDiG7Sf_BGG8X

[MaLd0n]

3 hours ago, Avenger-RP said:

Hello,

this trackpad in some cases don't work, never, avoid samsung with i2c

try this folder

https://filebin.net/jlbcaalocrc36ku8/EFI.zip?t=ucwj1rc1

[luccasoli]

Hello guys

I installed the mojave hackintosh on my ideapad 330, I'm using the latest versions of VoodooI2C.kext and VoodooI2CHID.kext to my trackpad and VoodooPS2Controller.kext to my keyboard, and the pinning with https://www.olarila.com/ topic / 5644-enable-i2c-trackpad-voodooi2c-not-a-guide-not-really /

but my trackpad ends up working like a usb mouse, and the worst part, it keeps "jumping" when I use it.

I'm doing tests here and I noticed that, no matter what PIN I put on GpioInt SBFG, it doesn't change it behavior.

And I also noticed that the "jumps" only happen when the notebook is using the battery, it doesn't happen when it's plugged in.

could someone help me? 

Clover and send me
https://drive.google.com/open?id=18oElJPUOLud2Lg5DW8EZS3tiOvggwDK9

[Ilaiga Archer]

I Have HP Probook 440 G7/ Can anybody help me make touchpad  i 2 C

[MaLd0n]

On 5/19/2020 at 11:05 PM, luccasoli said:

Hello guys

is not ellan, is a different device

 

10 hours ago, Ilaiga Archer said:

I Have HP Probook 440 G7/ Can anybody help me make touchpad  i 2 C

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

[Avenger-RP]

Had someone managed to make it work Samsung X20 (NP350XAA-KFWBR) ?

I made all the procedures but no way.

Even the pinout is the same as in the example.

 

 

Já responderam antes, desculpe.

Edited May 27, 2020 by Avenger-RP

[Moshe Lyahovsky]

hi I get frequent kp with voodooi2c it detects the hub and right after it kp if you want I can send you all of my dsdt and stuff but I read that the is a usual thing yoga 2 pro its elan 

SSDT-TPL0.aml DSDT.aml SSDT-XOSI.aml

Edited June 26, 2020 by Moshe Lyahovsky

[MaLd0n]

13 hours ago, Moshe Lyahovsky said:

hi I get frequent kp with voodooi2c it detects the hub and right after it kp if you want I can send you all of my dsdt and stuff but I read that the is a usual thing yoga 2 pro its elan 

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A