Guide - MSI B360 Gaming Arctic (Catalina)

[thief_fighter]

 

 

You did not extend the port range in the plist.

You had maxed out 15 ports and cannot enable more ports. Unless, you do the patch limit and add more ports to the plist (theoretically should work)

https://Olarila.com/forum/viewtopic.php?f=62&t=6539#p56905

 

I see, thanks a lot. I don't really need the last USB port (which is shared with USB3) so I'm all good.

[MacUser]

By this time, I had placed my Radeon RX580 unto the motherboard. So, from now on I will use the RX580 as my main gpu.

https://i.imgur.com/reqBte0.png' alt='IMGUR>'>

1. Graphics

https://github.com/acidanthera/WhateverGreen

https://github.com/acidanthera/Lilu

a. Radeon RX580 – works out of the box with whatevergreen and lilu kexts

b. UHD 630 – Using device properties for WhatEverGreen will break analogue sound but not HDMI. However, using old method of choosing fakeid and ig-platform-id in clover with device id 0x3e920003 and fake id 0x3e928086 and check "inject-intel" will bring back analogue sound.

https://i.imgur.com/Cg0wgF1.png' alt='IMGUR>'>

https://i.imgur.com/j69U3QQ.png' alt='IMGUR>'>

2. Sound for audio codec Realtek ALC892

https://github.com/acidanthera/AppleALC

– AppleALC and lilu kexts

- Place kexts in Clover>Kexts>Other

- Use Layout id = 1 in Clover

3. USB ports

- USBInjectAll kext + custom ssdt method

https://github.com/RehabMan/OS-X-USB-Inject-All

- FB patcher method – Use generated USBPower.kext alongside PMheart’s USB Port limit patch for Mojave Beta. USBInjectall can be

removed from system when using this method.

https://www.insanelymac.com/forum/topic/335018-release-intel-fb-patcher-v133/?tab=comments#comment-2628025

- USBInjectAll + clover boot arg method

http://Olarila.com/forum/viewtopic.php?p=65287#p65287

- PMHearts USB Port Limit Kext to Patch (Patch not working from 10.14.1 onwards)

https://Olarila.com/forum/viewtopic.php?f=62&t=6539&p=57919&hilit=port+limit#p57919

https://i.imgur.com/xIZ3Ek3.png' alt='IMGUR>'>

4. PCIe Wifi Card –

- https://www.aliexpress.com/item/WTXUP-for-Broadcom-BCM94360CS2-1200Mbps-802-11ac-PCI-E-Wireless-WiFi-Adapter-WLAN-Card-Bluetooth-4/32871539519.html?spm=2114.search0104.3.24.72bf512ac1uXxf&ws_ab_test=searchweb0_0,searchweb201602_5_5017015_10065_10068_10059_5016815_10696_100031_10084_10083_5017115_10103_451_452_10618_5016915_10307,searchweb201603_2,ppcSwitch_5&algo_expid=2ca0624e-c27f-4f8a-b286-10efd2288719-3&algo_pvid=2ca0624e-c27f-4f8a-b286-10efd2288719&priceBeautifyAB=0

- Broadcom BCM943602CS Wifi (Place kext in Clover>kexts>other)

- AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup

- Lilu.kext v1.2.5 or later (https://github.com/acidanthera/Lilu)

- Broadcom BCM943602CS Bluetooth (Place kext in Clover>kexts>other)

Guide: https://bitbucket.org/RehabMan/os-x-brcmpatchram

- BrcmFirmwareData.kext

- BrcmPatchRam2.kext

There are also other ways to enable wifi without using kexts mentioned above.

If you are interested, you can read up here http://Olarila.com/forum/viewtopic.php?p=68188#p68188

5. DSDT Renames

- Rename GFX0 to IGPU

- H_EC to EC

- XHCI to XHC

- HDAS to HDEF

- SAT0 to SATA

6. DSDT Patches

- HPET

- SLPB

- Darwin

- XHCI

- HDEF

- RTC fix

- IRQs fix

- SMBUS

- BUS1

- ALSD

- IMEI

In summary - The only kexts I use for this build (clover>kexts>others)

- ALC892 Audio Codec = AppleALC.kext + Lilu.kext

- Intel I219V7 Ethernet port = IntelMausiEthernet.kext

- UsbPower generated with FB Patcher app for custom usb port injection

update: nowadays, I use custom ssdt for my USB ports

- VirtualSMC or FakeSMC (use either one, NOT BOTH) ---> compulsory kext

- for Graphics = WhatEverGreen.kext + Lilu.kext

https://i.imgur.com/5AHkvYb.png' alt='IMGUR>'>

 

Hello Sir,

I need help to enable Intel UHD 630 with full acceleration in Mac os Mohave 10.14.5(18F132).

I have tried multiple method from different forums like adding values to config plist, change sm bios to 17.1,18.1,but nothing work.

it is showing 7 M.B. ram and no kext loaded. My Specification as follows..

Processor :- Core i3 8100

Mobo :- Asus B 360 MA

Ram :- 8 GB DDR 4 2400. mhz.

SSD :- Crucial BX 120 GB (Boot Drive).

GPU :- Nvidia 750 (Currently removed from system to enable HD 630)

As I mentioned above GTX 750 has been removed from the system, because I want to enable Intel Quick since video feature.so please help me to enable I GPU with full VRAM.

(After enabling iGPU and quick sync I will put my Ge-force card and I want to do some cosmetics like both IGPU and D.gpu shown. in about this Mac like u have done in your post..)

[onemanosx]

[ref]MacUser[/ref], Intel quicksync does not require full graphics acceleration. Intel HD is activated with a headless framebuffer just like a real mac.

[MacUser]

[ref]MacUser[/ref], Intel quicksync does not require full graphics acceleration. Intel HD is activated with a headless framebuffer just like a real mac.

 

Thanks for the reply,

but I am unable to activate HD graphics by changing values.so can you help me plz?

Thanks

[onemanosx]

[ref]MacUser[/ref], just input values in clover. Read my guide what value to use

[MacUser]

""b. UHD 630 – Using device properties for WhatEverGreen will break analogue sound but not HDMI. However, using old method of choosing fakeid and ig-platform-id in clover with device id 0x3e920003 and fake id 0x3e928086 and check "inject-intel" will bring back analogue sound.""

only above mentioned values need to enter. I am using core i3 8100 so need I use below value for CPU

https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LNeoQ00Ei54s-gBJWoS%2F-LOcxMmKpGNSjr8MCaUm%2F-LOcxqSVBQHY-ckFaJWC%2Fimage.png?alt=media&token=e7f24aea-0b1c-4e46-a62b-2069a162794d

https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LNeoQ00Ei54s-gBJWoS%2F-LOctHEyiCno_z62Y67c%2F-LOcte5-GWux2Z4mIM8g%2Fimage.png?alt=media&token=6e4e8aff-1c5a-4887-8aec-2f1ec59de742

Thanks and Regards,

[onemanosx]

Also enable igpu at bios too

[MacUser]

Also enable igpu at bios too

 

Dear,

Can u do that for me am not able to understand ,i am very noob here.Please

Thanks and regards,

config.plist.zip

[onemanosx]

Dear,

Can u do that for me am not able to understand ,i am very noob here.Please

Thanks and regards,

 

Only you can make changes in Bios. Unless you want to send your machine over by mail

[MacUser]

 

 

Only you can make changes in Bios. Unless you want to send your machine over by mail

 

The BIOS changes has been done already only need to manage file properties..

[onemanosx]

The BIOS changes has been done already only need to manage file properties..

reboot with your property changes and upload a copy of ioreg file

[MacUser]

upload a copy of ioreg with the property changes

 

run RunMe and uploaded zip.

Thanks and regards,

config.plist.zip

Send me Riteshs-iMac.zip

[onemanosx]

[ref]MacUser[/ref], is the sendme file generated after reboot with the property changes? I want to check if your config is successful.

[MacUser]

[ref]MacUser[/ref], is the sendme file generated after reboot with the property changes? I want to check if your config is successful.

 

I have reset what ever I have done to enable UHD 630.Attached config.plist file is unchanged.

thanks and regards,

[onemanosx]

[ref]MacUser[/ref], Re-do what you have undone. Its best you do the config so you may learn.

[MacUser]

[ref]MacUser[/ref], Re-do what you have undone. Its best you do the config so you may learn.

 

I haven't got any proper solution, every forum has its own ways so I am confused where to put values and where need remove, most of the CPU are 8th Gen i5 and there are lots of confusion with fake id's and GPU key.

Since from last week I am struggling to enable UHD 630.but I think I need to downgrade to Sierra just because stuck on UHD installation.

[onemanosx]

[ref]MacUser[/ref], it doesnt harm to try another method. Reboot with your device properties and upload sendme files

[MacUser]

[ref]MacUser[/ref], it doesnt harm to try another method. Reboot with your device properties and upload sendme files

 

uploading..

Send me Riteshs-iMac.zip

[onemanosx]

[ref]MacUser[/ref], Like I said a few posts back, the idea of enabling iGPU in headless framebuffer means no full graphic acceleration. And intel quicksync works as such. Meaning, video out is primary from dedicated graphics card. In this case, you did not connect any.

In other words, your video output should come from your RX/GTX card and not from motherboard video out.

[MacUser]

[ref]MacUser[/ref], Like I said a few posts back, the idea of enabling iGPU in headless framebuffer means no full graphic acceleration. And intel quicksync works as such. Meaning, video out is primary from dedicated graphics card. In this case, you did not connect any.

In other words, your video output should come from your RX/GTX card and not from motherboard video out.

 

As I said earlier Currently I have removed my GTX card and connected monitor HDMI to onboard igpu,it is working fine but shows only 7 mb of RAM instead if 1536 MB. Meaning graphics is disabled, so first need to enable graphics, then I can move on to enable quick sync right?

now I am stuck to enable graphics of Intel UHD 630.

so now just help to enable UDH graphics using i3 8100 CPU.

[onemanosx]

so first need to enable graphics, then I can move on to enable quick sync right?

 

No. Intel need not be full acceleration in quicksync mode. You should place your gtx back in the system

[MacUser]

 

 

No. Intel need not be full acceleration in quicksync mode. You should place your gtx back in the system

 

Suppose if I put my GFX back in system can I able to enable intel quick sync feature with my monitor connected to GFX??

[onemanosx]

[ref]MacUser[/ref], I already explained.

[MacUser]

Moderator,

Now i am using High sierra 10.13.6 OS.and also enable USB 3 using clover and ioreg(I don't know how to enable 3.1).but while checking speed of my USB 3 ports it shows USB 2 Speed,any help.

Thanks and Regards,

[onemanosx]

Moderator,

Now i am using High sierra 10.13.6 OS.and also enable USB 3 using clover and ioreg(I don't know how to enable 3.1).but while checking speed of my USB 3 ports it shows USB 2 Speed,any help.

Thanks and Regards,

scroll to previous posts and download my custom USB kext. Place in clover/kext/other folder and delete any other usb kexts you might have.